Danfoss H6 HVAC Basic Drive Decoupling Kit Instruction Manual
- June 1, 2024
- Danfoss
Table of Contents
Danfoss H6 HVAC Basic Drive Decoupling Kit
Product Information
Specifications
- Model: 130BB920.10
- Mounting: Brackets
- Model: 130BB910.10
- Mounting: Metal plate on frequency converter
- Tightening Torque: 2Nm
- Model: 130BB912.10, 130BB911.10
- Drive Type: VLT HVAC Drive Basic Drive
Product Usage Instructions
Step 1: Remove Brackets
Follow the instructions provided to remove the brackets from the product.
Step 2: Mount Metal Plate
Mount the metal plate on the frequency converter as indicated. Use two screws to fasten the plate with a tightening torque of 2Nm.
Step 3: Mount Brackets Again
Mount the brackets back onto the product following the provided guidelines.
Step 4: Decoupling Plate Installation
Install the VLT HVAC Drive Basic Drive with the decoupling plate as per the product specifications.
FAQ
- Q: What is the recommended tightening torque for the screws?
- A: The recommended tightening torque for the screws is 2Nm.
- Q: How should I mount the metal plate on the frequency converter?
- A: Mount the metal plate following the provided instructions and secure it with two screws using a tightening torque of 2Nm.
Mounting Instruction
-
Step 1
Remove brackets as shown. -
Step 2
Mount metal plate on frequency converter and fasten with two screws. Tightening torque: 2Nm -
Step 3
Mount brackets again. -
Step 4
VLT HVAC Drive Basic Drive mounted with decoupling plate.
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products dy agreed. Al trademarks in this material are property ofthe rejected companies. Dants and he Dantoss one tess dye trademarks on Dantos as Ad rights reserved.