OVIA OV7BCK Burgess Ceiling Bracket for Backlit LED Panels Instruction Manual
- June 17, 2024
- OVIA
Table of Contents
Installation, Technical & Safety Information Sheet
Product Refs.: OV7BCK
Burgess Ceiling Bracket For 600 X 600 Backlit LED Panels
ACCESSORIES
GENERAL INFORMATION
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE
REFERENCE.
Electrical products can cause death or injury, or damage to property.
If in any doubt about the installation or use of this product, consult a
competent electrician.
- Before commencing any electrical work, ensure the mains isolator on the consumer unit / fuse board is in the ‘OFF’ position, to prevent the possibility of electric shock.
- Before commencing installation, ensure the fitting is complete with the fixings required.
- Prior to installation, note the position of any pipes or wiring behind the fixed surface to prevent the risk of damage.
- Installation should be carried out in accordance with the latest edition of the National Wiring Regulations. If in any doubt please consult a qualified electrician.
- For product installation and wiring, see the individual LED backlit panel instructions.
INSTALLATION
(OV7BCK – Burgess Ceiling Bracket)
Fig.1 –
Remove all 6 fixing screws from each side of the backlit LED panel and keep
secure to be used later in Fig.3. 
Fig.2 – Place the Burgess Ceiling Brackets either
side of the backlit LED panel, ensuring this sits flat with the fixing screw
holes aligned.
Fig.3 –
Refit all 6 fixing screws on each side of the backlit LED panel through the
Burgess Ceiling Brackets ready for installation into the applicable ceiling
type.
Errors & Omissions excluded.
Specification is subject to change without notice.
OVIA Limited, Scolmore House,
Mariner, Lichfield Road Ind.
Estate, Tamworth, Staffordshire, B79 7UL
Telephone: 01827 300640
E-mail: [email protected]
Website: www.oviaUK.com