FRIGIDAIRE FDSR4501AP 24 Inch Panel Ready Built In Dishwasher Instruction Manual

FRIGIDAIRE FDSR4501AP 24 Inch Panel Ready Built In Dishwasher

Product Information

Specifications

• Brand: Frigidaire
• Model Number: 117833450-A-032024
• Weight: 17.6 lb
• Dimensions: 12 x 22 x 68.6 cm

FAQ

• Q: How do I clean the dishwasher filter?
  • A: Refer to the user manual for instructions on how to access and clean the dishwasher filter regularly to maintain optimal performance.
• Q: Can I use handwashing detergent in the dishwasher?
  • A: No, only use detergent specifically formulated for dishwashers to avoid damaging the appliance.

Information

• INSTALLER: Leave Assembly Instruction with owner.
• OWNER: Read your dishwasher User Manual. It contains important safety information for operating this appliance. It also has many suggestions for getting the best results from your dishwasher.

BEFORE YOU BEGIN

• Read all instructions before installing dishwasher.
• For your safety, please read and observe all safety instructions.
• This guide will help you anticipate drain, water and electrical connections, and help you select the best location for the dishwasher.
• The dishwasher is provided with water heating feature.
• The dishwasher is intended for connection to hot water supply.

WARNING: ELECTRIC SHOCK

HAZARD

• Disconnect electrical power at the fuse box or circuit breaker box be- fore beginning installation.
• Failure to follow this warning could result in death or serious injury.

CUT HAZARD

• To prevent serious injury from sharp edges, wear work gloves when handling, unpacking or disassembling unit.

CUT HAZARD

• Metal color panels are sharp and should be handled with care. Wear gloves to protect hands.
• Failure to follow this warning may result in injury.

WARNING

• Do not install the appliance alone.
• Protect the floor during the installation.
• If you need help contact the Authorised Service Center.
• If you need help contact a professional installer.

Tools

What In The Box

These components are available with the dishwasher.

WARNING

• Appliance must be installed into the niche only when wooden panel is assembled on door.
• Press center with flat head screwdriver to remove hose support.
• If not installed in the final location, we recommend opening the door with two people as shown above.

WARNING: Electric Shock Hazard

• Observe all local codes and ordinances for electrical and plumbing connections.
• All electrical and plumbing work should be performed by qualified persons.
• Drain, water and electrical lines should be roughed-in before going any further.
• Failure to follow this warning could result in death or serious injury.

WARNING: Electric Shock Hazard

• Electrical, water and drain lines must be confined to shaded areas in Figure above.
• Electric conductors, water and drain could be demaged.
• Failure to follow this instructions could result in fire or electric shock.

Dimensions

• External dimensions of the dishwasher.

• Dimensions of the niche.
• Please avoid having tools and components on the wall behind the dishwasher.

Remove kickplate

• Remove the kickplate. You will use this piece again later.

Add side trim cover

• Remove the adhesive strip from the side trim cover and apply it to the sides of the dishwasher. Align with the top of the dishwasher – there will be space at the bottom.

Adjust dishwasher height

• Start measuring the niche and level the dishwasher with manual screwdriver for rear and front legs.

Info

For full wooden panel please use enclosed drilling template and proceed with the following steps.

Drill holes for cabinet panel and handle

• Make holes with electric drill and use countersunk screws for fixing the handle.

WARNING

If not installed, in the kitchen compartment, we recommend opening the door by two people as shown.

Preparation for panel installation

WARNING

• Do not use electric drill.
• Remove 2 short screws from the center of the door. You can discard these.

Align cabinet panel

• Align wooden panel on the top of the appliance door.

Attach the panel

Attach the panel: STEP 1

Warning

• Do not use electric drill.
• Fix 4 panel fixation screws (C) to appliance door – 2 screws in the center and 2 screws in the bottom part of the door.

Attach the panel: STEP 2

• Remove and discard lateral 2 short screws shown in diagram.

Attach the panel: STEP 3

Warning

• Do not use electric drill.
• Fix 2 panel fixation screws (C) to appliance door. For regular panel door use 3rd hole from the top.

Add installation brackets

Warning

• Use protective gloves.
• Apply 4 installation brackets (D).
• Cut the brackets if necessary and smooth out the sharp edges with sandpaper.

Install steam protection

Install steam protection: STEP 1

• Measure the niche width and the depth of the top. Cut the steam protection (E) as shown above.

Install steam protection: STEP 2

• Remove the adhesive strip from the steam protection and apply the steam protection to niche top and the cabinet as shown above.

Install dishwasher in cabinet

WARNING

• Do not put fingers under the door.
• Connect drain hose making sure not to kink the hose. Carefully install the appliance in the niche.

Level dishwasher

• Level and align the applance in the niche and between the cabinets.

Connect the inlet hose and electrical connection.

WARNING: Risk of property damage

• Do not solder within 6° (15,24cm) of the water inlet valve. Damage to the plastic parts in the valve may occur.
• Use care that no sealer, dirt or other objects enter the valve.
• Damage to the filter screen may occur.
• Be sure the dishwasher is placed where the water inlet valve will be kept from freezing. If the valve freezes it may rupture and flooding may occur.

WARNING: Grounding instructions

• The dishwasher must be connected to a grounded metal, permanent wiring system or an equipment-grounding conductor must be run with the circuit conductors and connected to the appliance’s equipment grounding terminal or lead. It is the consumer’s responsibility to contact a qualified installer to make sure the electrical installation conforms with the National Electrical Code and local codes and ordinances.
• Do not connect the dishwasher to the power supply until the appliance is permanently grounded.
• All wiring connections must be enclosed in the junction box.
• This unit has copper lead wires.
• Joining aluminum building wire to stranded copper wire should be done by a qualified electrician using materials recognized by UL and local codes.
• Do not use an extension cord. Such use can result in fire, electrical shock or other personal injury.
• Failure to follow these instructions could result in death or serious injury.

Connect water and electricity

• Connect inlet hose and electrical connection.

Install kickplate And Remove interior packaging

Install kickplate

WARNING: Electric Shock Hazard

• If all connections are correct, there are no leaks and unit runs properly, replace the kickplate assembly before placing unit into operation.
• Failure to follow this warning could result in electric shock.
• Install kick plate and move down till ground as shown. Fix it with screws from step 1.

Remove interior packaging

WARNING

• Remove rack protection.

Final Alignment

• Slide dishwasher into cabinet niche, making sure product is level with the leveling feet (as shown in step 14). Panel should be aligned with adjacent kitchen cabinets.

Fix dishwasher on side cabinets

Fix dishwasher on side cabinets: STEP 1

• Check the alignment and fix all installation brackets using one lateral fixation screw (B) for each bracket.

Fix dishwasher on side cabinets: STEP 2

• Check again the alignment and fix all installation brackets adding the second lateral fixation screw (B) for each bracket.

Prepare the cabinet plinth

Prepare the cabinet plinth (optional)

• Apply the plinth cutting template to the kitchen plinth. Cut the hole in the plinth.

Attach cabinet plinth (optional)

• Apply the cabinet plinth.

Apply duct cap (optional)

• Apply the duct cap.

Info

Contact

Welcome home

Our home is your home. Visit us if you need help with any of these things:

• owner support
• accessories
• service
• registration
  • (See your registration card for more information.)
• Frigidaire.com
• 1-800-374-4432
• Frigidaire.ca
• 1-800-265-8352

References

• Kitchen, Laundry, Home Appliances & Accessories | Frigidaire
• Frigidaire

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>