VOID Sub Vantage Stylishly Brutal Bass Loudspeaker User Guide
- June 10, 2024
- VOID
Table of Contents
VOID Sub Vantage Stylishly Brutal Bass Loudspeaker
Safety and Regulations
Important safety instructions
- The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
- The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety instructions – read this first
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat source such as radiators, heat registers, stoves, or other such apparatus that produce heat.
- Do not defeat the safety purpose of the grounding-type plug. A grounding type plug has two blades and a third grounding prong. The third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect power cords from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit the apparatus.
- Only use attachments and accessories specified by Void Acoustics.
- Only use with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug the apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Since the mains power supply cord attachment plug is used to disconnect the device, the plug should always be easily accessible.
- Void loudspeakers can produce sound levels capable of causing permanent hearing damage from prolonged exposure. The higher the sound level, the less exposure needed to cause such damage. Avoid prolonged exposure to the high sound levels from the loudspeaker.
Limitations
This guide is provided to help familiarise the user with the loudspeaker system and its accessories. It is not intended to provide comprehensive electrical, fire, mechanical and noise training and is not a substitute for industry-approved training. Nor does this guide absolve the user of their obligation to comply with all relevant safety legislation and codes of practice. While every care has been taken in creating this guide, safety is user-dependent and Void Acoustics Research Ltd cannot guarantee complete safety whenever the system is rigged and operated.
EC declaration of conformity
- For EC Declaration of Conformity please go to: www.voidacoustics.com/eu-declaration-loudspeakers
UKCA marking
- For details of the UKCA marking go to: www.voidacoustics.com/uk-declaration-loudspeakers
Warranty statement
- For warranty statement go to: https://voidacoustics.com/terms-conditions/
WEEE directive
- If the time arises to throw away your product, please recycle all the components possible.
This symbol indicates that when the end-user wishes to discard this product, it must be sent to separate collection facilities for recovery and recycling. By separating this product from other household-type waste, the volume of waste sent to incinerators or land-fills will be reduced and natural resources will thus be conserved.
The Waste Electrical and Electronic Equipment Directive (WEEE Directive) aims to minimise the impact of electrical and electronic goods on the environment. Void Acoustics Research Ltd complies with the Directive 2002/96/EC and 2003/108/EC of the European Parliament on waste electrical finance the cost of treatment and recovery of electronic equipment (WEEE) in order to reduce the amount of WEEE that is being disposed of in land-fill sites. All of our products are marked with the WEEE symbol; this indicates that this product must NOT be disposed of with other waste. Instead it is the user’s responsibility to dispose of their waste electrical and electronic equipment by handing it over to an approved reprocessor, or by returning it to Void Acoustics Research Ltd for reprocessing. For more information about where you can send your waste equipment for recycling, please contact Void Acoustics Research Ltd or one of your local distributors.
Unpacking and Checking
All Void Acoustics products are carefully manufactured and thoroughly tested before being despatched. Your dealer will ensure that your Void products are in pristine condition before being forwarded to you but mistakes and accidents can happen.
Before signing for your delivery:
- Inspect your shipment for any signs of contamination, abuse or transit damage as soon as you receive it
- Check your Void Acoustics delivery fully against your order
- If your shipment is incomplete or any of its contents are found to be damaged; inform the shipping company and inform your dealer.
When you are removing your Sub Vantage loudspeaker from its original packaging:
- All Sub Vantage loudspeakers come packaged in a lid and base carton that has a protective sleeve around it; avoid using sharp implements to remove the cardboard to protect the finish
- If you need to place the Sub Vantage loudspeaker on a flat surface ensure you use a lint free product to protect the finish
- When you have removed the Sub Vantage loudspeaker from the packaging inspect it to ensure there is no damage and keep all original packaging in case it needs to be returned for any reason.
See section 1.5 for warranty conditions and see section 6 if your product needs servicing.
About
Welcome
Many thanks for purchasing this Void Acoustics Sub Vantage. We truly appreciate your support. At Void, we design, manufacture and distribute advanced professional audio systems for the installed and live sound market sectors. Like all Void products, our highly skilled and experienced engineers have successfully combined pioneering technologies with groundbreaking design aesthetics, to bring you superior sound quality and visual innovation. In buying this product, you are now part of the Void family and we hope using it brings you years of satisfaction. This guide will help you both use this product safely and ensure it performs to its full capability.
Sub Vantage overview
Using a newly developed split manifold arrangement to deliver hyper-quick transients and unparalleled output for its dimensions, the Sub Vantage has four 15” ultra-high-power drivers, making it the perfect companion for pairing with the Air Vantage DJ monitor.
Key features
- Specifically developed for monitoring applications
- Superb timing capabilities
- Hyper-quick transients
- Four very high power 15” transducers
- High efficiency
- Newly developed split manifold arrangement
Sub Vantage specifications
| Frequency response | 40 Hz – 160 Hz -3dB |
|---|---|
| Effciency1 | 107 dB 1W/1m |
| Nominal impedance | 2 x 4 Ω |
| Power handling2 | 2 x 1600 W AES |
| Maximum output3 | 137 dB cont, 143 dB peak |
| Driver configuration | 4 x 15” |
| Dispersion | Omnidirectional |
| Connectors | 2 x 4-pole speakON™ |
| Height | 908 mm (35.7”) |
| Width | 730 mm (28.7”) |
| Depth | 665 mm (26.2”) |
| Weight | 91.2 kg (201 lbs) |
- Measured in half space
- AES2 – 1984 compliant
- Calculated
Sub Vantage dimensions
Cable and Wiring
Electrical safety
To avoid electrical hazards please note the following:
- Do not access the inside of any electrical equipment. Refer servicing to Void-approved service agents.
Cable considerations for fixed installations
We recommend specifying installation-grade Low Smoke Zero Halogen (LSZH) cables for permanent installations. The cables should use Oxygen Free Copper (OFC) of grade C11000 or above. Cables for permanent installations should be compliant with the following standards:
- IEC 60332.1 Fire retardancy of a single cable
- IEC 60332.3C Fire retardancy of bunched cables
- IEC 60754.1 Amount of Halogen Gas Emissions
- IEC 60754.2 Degree of acidity of released gases
- IEC 61034.2 Measurement of smoke density.
We suggest using the following maximum copper cable lengths to keep level losses below 0.6 dB.
| Metric mm2 | Imperial AWG | 4 W load | 2 W load |
|---|---|---|---|
| 2.50 mm2 | 13 AWG | 18 m | 9 m |
| 4.00 mm2 | 11 AWG | 30 m | 15 m |
Sub Vantage wiring diagram
| speakONTM pins 1+/1- | speakONTM pins 2+/2- | |
|---|---|---|
| In | LF (2 x 15”) | LF (2 x 15”) |
| Out | LF link | LF link |
Bias Q5 speakONTM wiring
| Bias Q5 | Out 1 |
|---|---|
| Output | 4 x 15” LF |
| Max parallel units | 2 (2 W load to the amplifier) |
Grille Removal and Replacement
- Step 1: Attach cable ties to two positions on the grill as shown.
- Step 2: Pull the cable ties toward the opposite edge of the loudspeaker and then pull up and away to expose the enclosure.
- Step 3: To replace the grille simply reverse the process and remove the cable ties.
Service
Void Sub Vantage loudspeakers should only be serviced by a fully-trained technician.
Warning: No user serviceable parts inside. Refer servicing to your dealer.
Return authorisation
Before returning your faulty product for repair, please remember to get an R.A.N. (Return Authorisation Number) from the Void dealer who supplied the system to you. Your dealer will handle the necessary paperwork and repair. Failure to go through this return authorisation procedure could delay the repair of your product. Note that your dealer will need to see a copy of your sales receipt as proof of purchase so please have this to hand when applying for return authorisation.
Shipping and packing considerations
- When sending a Void Sub Vantage loudspeaker to an authorised service centre, please write a detailed description of the fault and list any other equipment used in conjunction with the faulty product
- Accessories will not be required. Do not send the instruction manual, cables or any other hardware unless your dealer asks you to
- Pack your unit in the original factory packaging if possible. Include a note of the fault description with the product. Do not send it separately
- Ensure safe transportation of your unit to the authorised service centre.
Appendix
Architectural specifications
The loudspeaker system shall be of the sub bass type consisting of four high power 15” (381 mm) direct radiating reflex loaded low frequency (LF) transducers coupled to a fibreglass reinforced plastic port in a birch plywood enclosure. The low frequency transducers shall be constructed on a cast aluminium frame, with a carbon composite cone, long excursion 101.6 mm (4”) voice coil, wound with copper wires on a high quality voice coil former and a ferrite magnet for high power handling and long-term reliability.
Performance specifications a for typical production unit shall be as follows: the usable bandwidth shall be 40 Hz to 160 Hz (±3 dB) and have a maximum on axis SPL of 137 dB continuous (143 dB peak) measured at 1 m using IEC265-5 pink noise. Power handling shall be 2 x 1600 W AES at a rated impedance of 4 Ω with pressure sensitivity of 107 dB measured at 1W/1m. The system shall be powered by its own dedicated power amplification module with DSP management. The wiring connection shall be via two Neutrik speakON™. One for input and one for loop-out to another speaker, to allow for pre-wiring of the connector before installation.
The enclosure shall be constructed from 18 mm multi-laminate birch plywood finished in a textured polyurethane and shall contain fixture points for a pressed, weather-resistant, powder coated steel grille with foam filter to protect the low frequency transducer. The cabinet shall have eight handles (four per side) for efficient manual handling. External dimensions of (H) 908 mm x (W) 730 mm x (D) 665 mm (35.7” x 28.7” x 26.2”). Weight shall be 91.2 kg (201 lbs). The loudspeaker system shall be a Void Acoustics Sub Vantage.
Contacts
NORTH AMERICA
- Void Acoustics North America
- Call: +1 630 686 6616
- Email: sales.usa@voidacoustics.com
HEAD OFFICE
- Void Acoustics Research Ltd, Unit 15, Dawkins Road Industrial Estate, Poole, Dorset, BH15 4JY
- United Kingdom
- Call: +44(0) 1202 666006
- Email: info@voidacoustics.com
Void Acoustics Research Limited is a company registered in England and Wales registration number 07533536
©2023 Void Acoustics Research Ltd.
This user guide is subject to change without notice.
For the latest online version, visit: www.voidacoustics.com Void Acoustics and the Void logo are registered trademarks of Void Acoustics Research Ltd. in the United Kingdom, USA and other countries; all other Void trademarks are the property of Void Acoustics Research Ltd.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>