MEMOBARCO ‎P723314034584 130 Garment Rack User Manual

June 17, 2024
MEMOBARCO

MEMOBARCO ‎P723314034584 130 Garment Rack

MEMOBARCO ‎P723314034584 130 Garment Rack

Important Notice

Dear customer,
If you receive a product with missing or damaged parts, or if you have any questions about our product, please feel free to contact below customer service mailbox for any questions, we will reply ASAP. We are a small business, your review or feedback will be helpful for us to better understand your needs, thank you for your support.
Customer service mailbox: [email protected]
Contact us on Amazon: From your Amazon order details page, select
“Order” >> “Sold by” >> “Contact seller”
Thank you for being one of Memobarco customers. We love you and will be always here to help!
Yours Sincerely,
Memobarco Team

Important Notice: Reading carefully before assembly

  • Always use proper tools
  • Follow the assemble steps in order, do not skip any steps
  • Be sure to check all packing materials for small parts may have coming loose inside the carton during shipment
  • Periodically check to ensure that all connectors are tight
  • Keep the instructions for future reference
  • Where the assembly instruction state that the assembly requires two or more people, do not attempt by yourself as there is a risk of injury.

MEMOBARCO DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES WHICH MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIO NS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT

YOUR UNIT MAY LOOK DIFFERENT IN APPERANCE FROM THE ONE SHOWN IN THE ILLUSTRATIONS ON THIS INSTRUCTION SHEET.

  1. Secure the plastic clips in place to the position shown.
    Reading carefully before assembly

  2. The arrows on the plastic clips should be pointed UPWARD.Reading carefully before assembly

  3. Align the flange to the groove.Reading carefully before assembly

  4. Warm Tips: 5
    As shown in the figure, when fixed to the pole, the multiple gaps between the two plastic buckles is a normal phenomenon, NOT a quality problem. This is aim to fit the shelf firmly into the pole.
    Reading carefully before assembly

  5. Recommend:
    You can use a rubber mallet to hit hard along the edges of the shelf. Please make sure it is completely fixed onto the pole.

Parts List

Warm Tips:
Before assembling the garment rack, please be sure to confirm the height of the shelves and hanging rods according to your clothes hanging needs.
Parts List
Parts List

Assembly Steps

  1. Insert the leveling feet (J) OR caster wheels (K) into the lower poles (C) in turn.
    Assembly Steps
    Warning:
    Do NOT mix the leveling feet and caster wheels.

  2. Fix the plastic clips (I) onto the lower poles (C) in turn.
    Assembly Steps
    Warning:
    The arrows on the plastic clips should be pointed UPWARD.
    Please keep all the plastic clips on the same position.
    Warm Tips:
    As shown in the figure, when fixed to the pole, the multiple gaps between the two plastic buckles is a normal phenomenon, NOT a quality problem. This is aim to fit the shelf firmly into the pole.

  3. Insert the assembled lower poles into the large shelves (A).
    Assembly Steps

  4. Insert the small shelf (B) into the 4 poles with the plastic clips on.
    Assembly Steps
    Warm Tips:
    When installing the small shelf, please keep it parallel to the floor and slowly slide it down until all the four sleeves tightly fit onto the plastic clips.
    Warning:
    The caster wheels with brake mechanism should be installed on the same side (circled as shown).

  5. Twist the upper poles (D) clockwise into the lower poles (C) one by one.
    Assembly Steps

  6. Install the support rail (E)
    Assembly Steps

  7. Assemble the top large shelf (A).
    Assembly Steps

  8. Buckle up the hooks (H), insert the short clothes hanging rod (F) on the left and the long clothes hanging rods (G) on the right. Then tighten with screws (H).
    Assembly Steps

  9. OPTIONAL but RECOMMENDED:
    Fasten the assembled garment rack to the wall with the anti-tip devices (L).
    Detailed Instructions:
    ①Mark the positions.
    ②Drill holes with a power drill.
    ③Tap the anchors into the holes with a hammer.
    ④Fasten the bottom pieces with the screws.
    ⑤Get the zip tie through the hook on the bottom piece.
    ⑥Tighten the zip tie.
    Assembly Steps
    Assembly Steps

  10. OPTIONAL:
    Install the S hooks (M) anywhere you need and place the fabric drawer (N) on the shelf (B).
    Assembly Steps

Documents / Resources

| MEMOBARCO ‎P723314034584 130 Garment Rack [pdf] User Manual
130, P723314034584 130 Garment Rack, P723314034584, 130 Garment Rack, Garment Rack, Rack
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

MEMOBARCO User Manuals

Related Manuals