lanjue PCJ-2356 PC Wireless Game Controller User Manual
- June 6, 2024
- lanjue
Table of Contents
lanjue PCJ-2356 PC Wireless Game Controller
Product information
Key Function
Mode and LED Indicator
- PC mode, right led will be on.
- XINPUT mode,left led will be on.
- ANDROID mode, two led will be on.
Applicable Description
-
Application and Connection
PC: Windows XP/7/8/8.1/10 -
Driver Description
If need the vibration mode in D-lnput, need to install driver.
Operating Instructions
- Plug the receiver into USB port of your computer or relative devices
- Use two AAA batteries and switch on your game controller
- Press the START button to connect
- Mode Selection
In D-lnput mode, press HOME key for 5 seconds to switch for PC/ANDROID/XINPUT modes
Product Specification
Product Name | USB Wire Gamepad | Product Type | PCJ-2356 |
---|
Application
| PC(Windows XP/7/8/10) xinput/android| Operating
Temperature
| -20 °C ~ + 65 °C
Humidity| 20 ~ 80%
Working Voltage| 3V| Working Current| 150 mA
Size| 155x110x60 mm| Product Weight| 205 g
Federal Communications Commission Notice
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must acceptany interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference 1. to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.