MEMOBARCO 100L Rolling Laundry Hamper Lid User Manual
- May 15, 2024
- MEMOBARCO
Table of Contents
MEMOBARCO 100L Rolling Laundry Hamper Lid
Dear customer,
If you receive a product with missing or damaged parts, or if you have any
questions about our product, please feel free to contact below customer
service mailbox for any questions, we will reply ASAP. We are a small
business, your review or feedback will be helpful for us to better understand
your needs, thank you for your support. Customer service mailbox:
support@imemobarco.com
Contact us on Amazon : From your Amazon order details page, select “Order” » “Sold by”» “Contact seller” Thank you for being one of Memobarco customers. We love you and will be always here to help ! Yours Sincerely,
Memobarco Team
Important Notice: Reading carefully before assembly
- Remove all fittings from the plastic bags and separate them into homologous groups.
- Keep children and animals away from the installing area to prevent them from swallowing small parts.
- Make sure you have spacious space to lay out all the parts before assembly.
- Always use proper tools.
- Follow the assemble steps in order, do NOT skip any steps.
- Periodically check to ensure that all connectors are tight.
- Keep the instructions for future reference.
- Please dispose of all packaging carefully and responsibly.
A MEMOBARCO DISCLAIMS ANY LIABILIT Y FOR DAMAGES OR INJURIES WHICH MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT. YOUR UNIT MAY LOOK DIFFERENT IN APPERANCE FROM THE ONE SHOWN IN THE ILLUSTRATIONS ON THIS INSTRUCTION SHEET.
Parts List
Hardware List
Assembly Steps
Step 1:
-
Use the wrench (J) to fix one side of the bottom cross bar (B) to the one side of the bottom side frame (A) with 2 M6’32mm screw (I).
Tips : Do NOT fully tighten the screws. -
Insert the bottom thin bars (C) onto the bottom cross bar (B). Then use the wrench (J) to fix another side of the bottom cross bar (B) to another side of the bottom side frame (A) with 2 M6’32mm screws (I). Finally fully tighten all the screws.
Tips : The threaded holes on the bottom cross bars should be faced INSIDE for inserting the bottom thin bars (C).
Step 2:
Insert the u-shaped handles (DJ onto the bottom side frames (A)
Tips : The handles will be fixed automatically via the spring
buttons.
Step 3:
- Align the top cross bars (EJ ® to the u-shaped handles (DJ. Use the wrench (JJ to first fix one side with 2 M6’32mm screws (I).
- Put the side pocket (FJ to the other side of the cross bar (EJ. Use the wrench (JJ to fix ii together with the cross bar with the 2 M6’32mm screws (I).
Step 4:
Rotate the casters (GJ to the bottom side frames (AJ. Use the wrench (KJ to
tighten them.
Step 5:
Put the cloth cover (H) to the assembled laundry hamper frame. Attach the hook and loop closures on the inside to fix ii.
