MEMOBARCO Rolling Clothes Rack Heavy Duty Clothing Rack User Manual
- May 15, 2024
- MEMOBARCO
Table of Contents
Rolling Clothes Rack Heavy Duty Clothing Rack
User Manual
Dear customer,
If you receive a product with missing or damaged parts, or if you have any
questions about our product, please feel free to contact below customer
service mailbox for any questions, we will reply ASAP. We are a small
business, your review or feedback will be helpful for us to better understand
your needs, thank you for your support.
Customer service mailbox:
support@imemobarco.com
Contact us on Amazon: From your Amazon order details page, select “Order” >>
“Sold by” >> “Contact seller”
Thank you for being one of Memobarco customers. We love you and will be always
here to help ! Yours Sincerely, Memobarco Team
Important Notice: Reading carefully before assembly
- Remove all fittings from the plastic bags and separate them into homologous groups.
- Keep children and animals away from the installing area to prevent them from swallowing small parts.
- Make sure you have spacious space to lay out all the parts before assembly.
- Always use proper tools.
- Follow the assemble steps in order, do NOT skip any steps.
- Periodically check to ensure that all connectors are tight.
- Keep the instructions for future reference.
- Please dispose of all packaging carefully and responsibly.
A MEMOBARCO DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES WHICH MAY OCCUR
DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY ASSEMBLE THE
PRODUCT, OR PROPERLY USE THE PRODUCT.
YOUR UNIT MAY LOOK DIFFERENT IN APPERANCE FROM THE ONE SHOWN IN THE
ILLUSTRATIONS ON THIS INSTRUCTION SHEET .
Parts List
Hardware
List
Assembly Steps
-
Align the bottom poles (B) to the bottom support rods (A). Use the wrench (L) to slightly fix them with 6 M6*35 screws (J).
Tips:Do NOT fully tighten the screws! -
Rotate the casters (C) to the bottom support rods (A).
Use the wrench (Kk) to tighten them.
-
Align the lower poles (D) to the bottom support rods (A) .
Use the wrench (L) to slightly fix them with 4 M6*35 screws (J).
Tips:Do NOT fully tighten the screws! -
Place the upper poles (E) on the lower poles (D) on the back. Use the wrench
(L) to slightly fix them with 2 Mé6*8 screws (I).
-
Align the hanging rods (F) to the lower poles (D) on the front and the upper poles (E) on the back.
Use the wrench (L) to slightly fix them with 4 M6*8 screws (I).
Tips:Do NOT fully tighten the screws! -
lnsert the expansion rods (G) into the hanging rods (F).
Tips: Please first hold the spring buttons on the hanging rods if you want to release and adjust the expansion rods.
-
Align the reinforced bars (H) to the lower poles (D).
Use the wrench (L) to fix them with 4 M6*35 screws (J). -
Tighten all screws completely.
Check and installation completed.
Tips: Please align the notch of the reinforced bars to the lower poles surface to ensure more stable support.
