dBTechnologies IS210L Professional Audio Loudspeaker User Guide
- June 17, 2024
- dBTechnologies
Table of Contents
- dBTechnologies IS210L Professional Audio Loudspeaker
- Product Usage Instructions
- MAIN FEATURES
- PACKAGE CONTENTS
- DESCRIPTION
- ACCESSORIES
- DIMENSIONS
- TECHNICAL SPECIFICATIONS
- CONNECTIONS
- PROTECTION AGAINST SOLID OBJECTS AND LIQUIDS (IP RATING)
- MECHANICAL FIXING POINT
- INSTALLATION
- CONFIGURATIONS
- FAQ
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
dBTechnologies IS210L Professional Audio Loudspeaker
Specifications
- Speaker Type: 2-Way Passive Loudspeaker
- Protection against solid objects and liquids (IP): IP55
- Frequency Response: 65 Hz – 17.5 kHz
- Usable Bandwith [-10dB]
- RMS Power: 55
- Rated Impedance
- Max SPL (1 m)
- Directivity (HxV)
- HF LF Crossover Frequency
- Signal Input
- Signal Output
- Housing Rigging Points: DRK-1, DRK-2, LP-6
- Dimensions (WxHxD): 674mm x 212mm x 400mm
- Weight
Product Usage Instructions
Connection
Ensure proper installation following the user manual instructions. Connect
the audio source to the speaker using the provided cables. Make sure to link
the speakers in the correct configuration based on the mechanical fixing
points.
Mechanical Fixing Points
The IS210L can be installed in an array configuration using the fixing
points provided on each side of the loudspeaker. Use front and back link
brackets to fasten the speaker to another one or a DRK flybar.
Front Link Brackets
Attach the front link brackets to the IS210L using the designated fixing
points. Fasten the brackets securely using the SPK holes for linking to
another loudspeaker or DRK holes for DRK flybar mounting.
Back Link Brackets
Secure the back link brackets to the IS210L using the specified fixing
points. Use the SPK hole for linking to another loudspeaker or DRK hole for
DRK flybar mounting.
Installation
Fasten the front and back link brackets on each side of the speaker
according to the desired configuration. Use the provide holes to select the
tilt angle for array mounting or flybar mounting.
Speaker Array Mount
Secure the speakers using the designated holes for array mounting. Choose
the tilt angle based on the back link brackets holes.
DRK Flybar Mount
Attach the speaker to the flybar using the specified holes. Select the
appropriate hole for back link bracket fastening based on the desired tilt
angle and array configuration.
MAIN FEATURES
- Impressive sound pressure
- Quick installation
- Multiple array configurations
PACKAGE CONTENTS
The box contains:
- N°1 IS210L loudspeaker
- N°2 front link brackets
- N°2 back link brackets
This quick start and warranty documentation
DESCRIPTION
IS210L is the new dB Technologies 2-way passive line array speaker for professional use. It is equipped with one compression driver (voice coil: 2,4″ exit: 1.4″) and two 10″ neodymium woofers (2.5″ voice coil). The coverage pattern is 90° (H) × 15° (V). The mechanical design allows an easy, accurate and quick installation for flyable or stand use in ar- ray configuration thanks to the included brackets.
ACCESSORIES
DIMENSIONS
TECHNICAL SPECIFICATIONS
CONNECTIONS
PROTECTION AGAINST SOLID OBJECTS AND LIQUIDS (IP RATING)
The speakers are protected against the ingress of solid objects and liquids
with a rating of IP55 as defined by
IEC 60529. Please only use cables with the specified diameters:
PG9 => between 4 and 8mm diameter
Fasten properly the cable gland using the plastic tightening nut.
WARNING!
Failure to comply with these installation prescriptions could adversely affect
the declared protection ratings.
MECHANICAL FIXING POINT
Is 210L can be installed in array configuration, on each side of the loudspeaker the user can find mechanical fixing points to fasten the loudspeaker to another one or a to DRK flybar using the included brackets. The (A) fixing points allow front link brackets mount; the (B) fixing points allow back link brackets mount. The (C) fixing points allow to fasten another speaker in ar- ray configuration.
FRONT LINK BRACKETS
The front link brackets allows to link the IS 210L to another loudspeaker
or to a DRK flybar. Fasten the brackets to the IS 210L (A) fixing points using
the SPK holes (in case of another loudspeaker mount) or the DRK holes (in case
of DRK flybar mount).
BACK LINK BRACKETS
The back link brackets allows to link the IS 210L to another loudspeaker or to
a DRK flybar and adjust the tilt angle from 1° to 15°. Fasten the brackets to
the IS 210L (B) fixing point using the SPK hole (in case of another
loudspeaker mount) or the DRK hole (in case of DRK flybar mount).
INSTALLATION
On each side fasten the front and back link brackets to the loudspeaker departmentding on loudspeaker or DRK flybar coupling.
SPEAKER ARRAY MOUNT
Fasten the speakers using the holes as shown; select the tilt angle from the
back link brackets holes depending on the array configuration.
DRK-1 FLYBAR MOUNTI
Fasten the speaker to the flybar using the holes as shown; an arrow on the
flybar indicate the hole to choose for the back link bracket fastening. Select
the tilt angle from the back link brackets holes depending on the array
configuration.
DRK-2 FLYBAR MOUNT
radicate here poet these for the backline bracket taste A go Selective til ang
from ate back in brackets hothe year- ding on the array configuration.
LP-6 BRACKETS FLOWN MOUNT
The LP-6 brackets allows to link IS 210L loudspeakers with IS 115S subwoofers
in flown or stack configurations. For the flown installation with LP-6
brackets follow this procedure:
- First remove the IS 210L side panels and internal link brackets
- Fasten the LP-6 brackets to the subwoofer
- Fasten the loudspeaker to the LP-6 brackets
- The three holes in the back of the LP-6 brackets allow to adjust the tilt angle (-7.5°, 0° or +7.5°).
For more information please refer to LP-6 user manual.
LP-6 BRACKETS STACK MOUNT
For the stack installation with LP-6 brackets follow this procedure:
- First remove the IS 210L side panels and internal link brackets
- Fasten the LP-6 brackets to the subwoofer
- Place the loudspeaker upside down on the subwoofer and fasten to the brackets
- The three holes in the back of the brackets allow to adjust the tilt angle (-7.5°, 0° or +7.5°).
For more information please refer to LP-6 user manual.
CONFIGURATIONS
WARNINGS
-
Make sure that the loudspeaker is securely installed in a stable position to avoid any injuries or damages to persons or properties. For safety reasons do not place one loudspeaker on top of another without proper fastening systems. Before hanging the loud- speaker check all the components for damages, deformations, missing or damaged parts that may compromise safety during installation.
-
If you use the loudspeakers outdoor avoid spots exposed to bad weather conditions. The external wiring connected to speaker output terminals requires installation by qualified personnel only. Once the equipment is installed, prevent access to the connectors to unqualified personnel. Only use the accessories and configurations described in this manual, and proceed in accordance with the instructions given in the manuals for the accessories. Technologies will not accept any responsibility
for damages caused by inappropriate accessories or additional devices. -
Installation and use of this equipment and its accessories must be performed only by “Expert personnel” according to safety standard. To prevent hazards to people, animals and/or objects, make sure that the installation is stable and secure. Comply with the safety regulations and laws in force in the country in which you use the product. For safe use, periodically check that all parts are in good working condition before use. Only authorized personnel may carry out the design, calculations, installation, testing and maintenance of professionally flown or stacked audio systems.
-
Check periodically the integrity and the functionality of the accessories and the technical equipments for a safe installation. user should never apply a load that exceeds the working load limits of any rigging components or equipment here presented. design, calculation, installation, testing and maintenance of suspension and stack systems for audio equipment must be performed only by qualified and authorized personnel. AEB Industriale s.r.l. denies any and all responsibility for improper installations, in the absence of safety requirements.
-
Features, specifications and appearance of products are subject to change without notice. dBTechnologies reserves the right to make changes or improvements in design or manufacturing without assuming any obligation to change or improve products previously manufactured.
Scan with your QR Reader App to download the complete User Manual.
A.E.B. Industriale Srl Via Brodolini, 8 Località Crespellano 40053 VALSAMOGGIA BOLOGNA (ITALIA)
- Tel. +39 051 969870
- Fax +39 051 969725
- www.dbtechnologies.com
- info@dbtechnologies-aeb.com
FAQ
Q: What is the IP rating of the speakers?
A: The speakers are rated IP55, providing protection against solid objects
and liquids.
Q: How should I connect the audio source to the speaker?
A: Connect the audio source to the speaker using appropriate cables and
follow the user manual instructions for proper installation.
Q: Can I install the IS210L in an array configuration?
A: Yes, you can install the IS210L in an array configuration using the
provided mechanical fixing points and brackets.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>