dBTechnologies LP-13 Link Brackets For VIO Speaker Instruction Manual
- May 15, 2024
- dBTechnologies
Table of Contents
dBTechnologies LP-13 Link Brackets For VIO Speaker
Product Information
Specifications :
- Product Name: LP-13 Brackets
- Model Number: 420120444Q REV1.0
- Compatibility: VIO X206/IS26T speakers
Product Usage Instructions
Subwoofer Installation:
- Firmly attach the brackets (A) to the subwoofer by inserting screws (B) and washers (C) into the designated holes and tightening them.
- Secure the speaker to the brackets by inserting screws (B) and washers (C) into the matching holes and tightening them.
Flybar Installation:
- Mount the brackets (A) onto the flybar using M10 screws and nuts provided with the flybar. Insert the screws into the indicated holes and secure them with nuts.
- Attach the speaker to the brackets by inserting screws (B) and washers (C) into the designated holes and tightening them.
Configurations:
- After setting the tilt angle of the speakers, secure them by tightening screws (D) into the specified holes.
- You can install up to a maximum of three speakers on both subwoofer and flybar mounting.
FAQ
-
Q: Can I use these brackets with other speaker models?
A: These brackets are specifically designed for use with VIO X206/IS26T speakers. It is recommended to use them only with compatible models. -
Q: Are installation tools included in the package?
A: The necessary screws and washers are provided for installation. Additional tools may be required for mounting.
LP-13 BRACKETS INSTRUCTIONS
DESCRIPTION: Link brackets for VIO X206/IS26T speaker ceiling installation
PACKAGE CONTENT
- A. (2x) Bracket
- B. (10x) M10x30 screw
- C. (10x) Ø10 Washer
- D. (6x) Vite M5x10
CAUTION: Only qualified personnel may use the LP-13 brackets. Two people
are needed to operate with this accessory. To prevent hazards to people,
animals and/or objects, make sure that the installation is stable and secure.
Follow the safety regulations and laws of the country in which you use the
product. Install the product as described in these instructions. To use this
accessory safely, check that it is working and intact before use. The warnings
in this manual must be observed in conjunction with the “USER MANUAL – Section
2”.
CHECK (IF ANY) THE LATEST VERSION OF THIS DOCUMENT ON
WWW.DBTECHNOLOGIES.COM
VALSAMOGGIA BOLOGNA (ITALIA)
- Tel +39 051 969870
- Fax +39 051 969725
- www.dbtechnologies.com
- info@dbtechnologies-aeb.com
Features, specifications and appearance of products are subject to change without notice. dBTechnologies reserves the right to make changes or improvements in design or manufacturing without assuming any obligation to change or improve products previously manufactured.
SUBWOOFER INSTALLATION
- Insert the (B) screws and the (C) washers in the matched holes as shown, then fasten the screws all the way in to fasten the (A) brackets to the subwoofer.
- Insert the (B) screws and the (C) washers in the matched holes as shown, then fasten the screws all the way in to fasten the speaker to the (A) brackets.
FLYBAR INSTALLATION
- Use the M10 screws and the nuts included with the flybar to fasten the brackets. Insert the screws in the matched holes and fasten with the nuts.
- Insert the (B) screws and the (C) washers in the matched holes as shown, then fasten the screws all the way in to fasten the speaker to the (A) brackets.
CONFIGURATIONS
- Set the speakers tilt angle and fasten the screws into the designated holes.
- The maximum load is n.3 loudspeakers for both subwoofer and flybar mounting.
These brackets must be used with the screws included: please take care of them during the lifetime of the kit. In case of replacement use only Class 8.8 DIN 933 ISO 4017 UNI 5739 certified tools. Do not use the brackets with not certified parts to avoid hazards during use/lift up.
References
- AEB Software for Global Trade and Logistics
- dBTechnologies - Professional Audio Equipment
- dBTechnologies - Professional Audio Equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>