Ufree U-2216 Beard Trimmer for Men User Manual
- June 1, 2024
- Ufree
Table of Contents
ALL IN ONE HAIR CLIPPER MODEL: U-2216
U-2216 Beard Trimmer for Men
Professional Hair Clippers Zero Gapped Cordless Hair Trimmer & Grooming Kit
Overview
1. T-blade head (Zero Gapped Detail Trimmers)
2. Switch
3. Display
4. Charging port
5. Hair clipper head
6. Precision trimmer head
7. Nose /ear hair trimmer head
8. Razor head
9. Body hair trimmer head
10. Body hair trimmer head comb row 3/6/9mm| 11. T-blade head
(Zero Gapped Detail Trimmers) comb row 1/3/5/7mm
12. Hair clipper head comb row 3/6/9/12/15mm
13. Type-C charging cable
14. Brush
15. Beard trimmer attachment
16. Precision comb 1/2/3/…/9/10mm for Beard trimmer attachment
17. Base
---|---
Safety instructions and Caution
Please read the following safety instructions carefully before using this product.
- This product has a rechargeable battery inside. Do not throw it into fire, use or charge it in high temperature, and do not expose the product to excessive heat temperature.
- You may not use the product in the absence of a guardian or a person who is suffering from physical, sensory, or mental retardation, or lack of experience and knowledge.
- If the power cord is damaged, you should discard the power cord and do not use it.
- Do not insert the charger into a household outlet or remove it from the outlet when your hand is wet.
- Do not leave the product in the place where children can touch, do not allow children or toddler to use it by themselves.
- Before using, please check wheather the hair trimmer cutting head is broken.
Charge
The charging input of this product is 5V-1A. When connecting the power supply,
please pay attention to the output of the power supply!
When charging, the digital display lights up from bottom to top, it takes 90
minutes to fully charge, and number 90 is displayed.
When fully charged, it can be used for about 180 minutes.
Instructions for use
To remove the cutter head: Press the top of the cutter head to remove the
cutter head.
Install the cutter head: insert the buckle foot of the cutter plate into the
product slot, press the cutter plate, and buckle the cutter head
Installation and removal of comb bar
Install the comb row: the blade is flat on the comb row, move it to the top, press the bottom of the comb row, and buckle it into the comb row Removing the comb bar: Remove the comb bar by force
Use of 7 trimming heads
–T-blade head (Zero Gapped Detail Trimmers)
Equipped with 4 different size comb rows: 1/3/5/7mm
When used without comb bar, the shortest can be trimmed to 0.3mm.
For trimming T line, Multiple Trendy Hairstyles: It is suitable for oil head,
trimming and carving hair shape, bald head 
–Hair clipper head
Equipped with 5 comb rows: 3/6/9/12/15mm
Can be used to trim different hairstyles/sideburns — Precision trimmer head
For trimming eyebrows/hairstyle lettering styling –Nose/ear hair trimmer
head
For trimming nose/ear hair — Razor head
for trimming beards and sideburn –Body hair trimmer head
Equipped with 3/6/9mm comb bar
For trimming hair on various parts of the body Beard trimmer attachment
Equipped with 1 adjustable positioning comb: 1/2/3/4/5/6/7/8/9/10mm
For trimming and styling beard/sideburns
Travel lock function
Press and hold the switch for 5 seconds, the product is locked, and the
display flashes for 3 seconds;
Press and hold the switch for 5 seconds or connect to charge; the product
turns on.
Product cleaning and maintenance
After each use, use the provided brush to remove the remaining hair on each
cutter head; if necessary, remove the cutter head and clean the cutter head
under the faucet.
Note: The entire machine is waterproof and washable
After cleaning, add 3 drops of lubricating oil to the left, middle and right
of the cutter teeth.
Thank you for shopping at Ufree.
If you have any suggestions or questions about our product,please feel free to
send us an email. Ufree attach great importance to the customer experience. We
will help you solve it at the first time.
Email: [email protected]