Zhongxin NX1PRO Smart Watch User Manual

Smart Watch

Instruction for Use

Warm Reminder This product needs to download the APP, connect to Bluetooth through the APP, and cannot connect to Bluetooth alone, Please notice.

1. Smart watches can measure heart rate and blood oxygen, but cannot be used for any medical functions;
2. Charging: lease charge your smartwatch before use and make sure it is fully charged. Please make sure that the eject pins of the 2 magnetic charging cables are aligned with the 2charging contacts of the main unit, or plug the charging cables into the USB  adapter (adapter 5V 1A). Make sure that the metal contacts are free of dust, oxidation, and impurities, While charging, a charging icon will appear on the smartwatch’s screen. If you don’t use your smartwatch fora long time, please charge it once a month.
3. Do not use a power adapter with an output current of more than 2A for charging, otherwise, the smartwatch will be damaged.
4. Do not shower with hot water or place the smartwatch under high temperature; otherwise, the water resistance of the smartwatch will be damaged
5. Do not charge when wet or with water.

Appearance

Product instruction

Remove Strap and Charge Mode

Package List

A. Package Box1
B. Smart Watch+f
C. User Manual 1
D. Magnetic USB Charger Cable1

Application installation and Bluetooth connection

Please search ftcloudpro” in Myapp and Google Play on Android devices or App Store on Phone; or scan the Qq code below to download and install the application.
Note: Android supports 5.0 and above; IOS supports 10.0 and above; Bluetooth hardware 5.0 and above Bind the smartwatch, Click on the selection of bind device and then find the device you want to connect to. If there are multiple devices in the vicinity, select the MAC address of the smartwatch you want to bind. If the srnartwatch is successfully tied to the phone, the Bluetooth icon will display at the top of the smartwatch

http://fitcloud.hetangsmart.com/qrcode/

Product Parameters

Main control chip: RTL8763 EWE
Blue tooth: BLE 5.2
Screen size: 1.43 inches, AMOLED
Battery capacity: 240 mAh
Battery type: Polymer battery
Use time: 5-7 days
Waterproof level; IP68
Charging method: magnetic UsB cable
Operating temperature: 0-40 C
Compatibility: IOS 10.0 or above; Android 5.0 or above; ft most mobile device on the market.

Instruction for Use

Press the side button or lift your hand to wake up the screen, and press and hold for 3 seconds to switch the interface in the home page, Slide up to enter the information bar; slide down to enter the control center; slide left to enter the sports data; slide right to  enter the function list.

Function Description

1. .Replace the Watch Dial
   Long press the main page for 3 seconds to enter the watch dial replacement page. Or download the replacement dial on the app.

2. Control Center
   Slide down to enter the control center, There are: Do not disturb mode; Brightness Adjustment; Settings ; Find my phone; System; Shutdown and Setting

3. Brightness Adjustment
   Slide down to the control center and click the brightness adjustment loon to adjust the brightness of your device.

4. Do Not Disturb Mode
   Slide down to the control center and click the Do not disturb icon to confrm that do not disturb mode is on

5. Find My Phone
   Slide down to the control center, click Find my Phone icon, and your phone will vibrate to alert you

6. System
   Slide down to the control center, click system to view the system version

7. Settings
   Slide down to the control center and click the settings ion to enter the function setting.

8. information
   Slide up to the control center, click audio icon, open audio mode

9. Sport Data
   Side once to the left to the sports data page, view the sports data, and record steps, calories, and kilometers separately,

10. Heart Rate
    Slide twice to the left to the heart rate page, start measure and show the data

11. Call Function
    This function needs to be connected to audio Blue tooth When entering the dial, you can enter the phone number and call as needed; long press on the eyboard7and 9 to enter and#

12. Sport Mode
    Slide right to enter the list function, click to enter the sports mode and select your preferred sports mode

13. Weather
    Slide right to enter the list function, click the weather ion and view the weather,

14. Music Control
    Slide right to enter the list function, click to enter the music control to adjust the upper and lower song titles.

Other Functions

Alarm clock Find the watch rminder Call reminder Drink water reminder Sedentary reminder
Low power reminder Remote Carers(start from App) Fid phone Timer

Cautions

1. Why should l wear my soar twatch tightly when measuring my heart rate?
   Using the principle of light reflection, the smartwatch penetrates the skin with a light source a0d collects the signal reflected on the sensor to calculate the heart rate. If not worn tightly, ambient light will enter the senor add affect the measurement accuracy

2. Not recommended to wear in a hot bath the frst factor 8 hot bath will produce steam due to the high temperature of the bath water, it is easy to produce a lot of steam. Steam is a gas with a small molecule radius, so it can easily penetrate the gap on the  intelligent smartwatch casing. When the temperature drops, the water will gradually condense into water droplets, which will cause damage to the circuit board and further damage the smartwatch.

3. When connecting Bluetooth. Make sure the Bluetooth of your phone and the smartwatch are turned on. When doing a Bluetooth search, please make sure the smartwatch is not connected to another account number; when doing a Blue tooth search, please  keep the smartwatch and the phone as close as possible

4. If the users phone has installed other software, such as Mobile Manager, in order to ensure the normal operation of the background AP, please turn on the phone’s message push and allow background operation, otherwise it can not pus.h messages

5. To ensure the accuracy of the test data, after entering the blood oxygen test mode, stay relaxed and still during the test and make sure the smartwatch and your heart are at the same height. Please do not talk during the test. (This function provides data  reference for blood oxygen changes before and after human exercise and cannot be used for medical purposes)

Battery Information

Warning
This product is not a medical device. This smartwatch and its applications are not available for diagnosis, treatment or preventive therapy of diseases. Consult a medical professional before changing your exercise habits and sleep habits to avoid serious injury.  The manufacturer reserves the right to modify and improve the functional descriptions ofthe user guide,as well as to update the content on an ongoing basis without notice This user guide is for reference only, for soar twatch sold here, please refer to the foal  product.

FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause  undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in  a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following  measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>