Zhongxin 2AZNB-R3 Health Smart Ring User Manual

Zhongxin 2AZNB-R3 Health Smart Ring

Product Information

Specifications:

• Model: XYZ-2000
• Colour: Black
• Material : Plastic
• Power: 120V, 60Hz
• Dimensions: 10 x 5 x 3 inches
• Weight: 2 lbs

Product Usage Instructions:

1. Setting Up:
   Place the product on a flat, stable surface near a power outlet.

2. Powering On:
   Plug the product into a 120V, 60Hz power source and switch on the power button located on the side of the product.

3. Operation:
   Follow the specific operation instructions for the desired function. Refer to the user manual for detailed guidance on different modes and settings.

4. Maintenance:
   Regularly clean the product with a damp cloth. Do not use harsh chemicals or abrasive materials that may damage the plastic surface.

5. Storage:
   Store the product in a cool, dry place away from direct sunlight when not in use.

Product introduction

Please note : The Ring service is not intended to diagnose, treat or prevent any disease or medical condition. The information and data in the service are for informational purposes only and do not replace the services of a health professional or physician. If you have any questions about your medical condition, you are advised to consult a medical professional.

Packing instructions

1. Smart ring
2. User manual
3. Magnetic line

Specification parameter

1. Storage capacity: It is recommended to connect the APPand synchronize data every day, and the ring can be stored at most30 days of data, depending on the type and frequency of use
2. Product weight: about 6.8g
3. Battery capacity: 18mAh polymer lithium battery
4. Battery life: 3-5 days, depending on the frequency of use
5. Bluetooth version: BLE5.1
6. Bluetooth range: 3-5 meters
7. Waterproof level: 1P68

User guide

User guide
Search for the EcTri in Google Play or App Store to download the APP. Please allow the APP lo obtain Bluetoolh connection permission and location permission or scan the QR code on the right side to download the APP

Charge activation

• When using the device for the first time, charge and activate the device.
• If factory Settings are restored on the app, reactivate it with a charge.
  1. Ring charging: Use the matching charging cable to connect the ring and charger
  2. After the power is turned on, the ring indicator light is always red.
  3. Charging: The red light is on. Charging is complete: the green light is on.
  4. Charging time: 60 minutes
  5. Power check : Check the power at the device connection on the APP homepage

Operation Instructions

APP operation Instructions
After the device is activated, pair it with the APP EcTri for easy operation and use. The APP consists of four pages, which are: Home page | Sports Equipment | Mine.

1. home view health data, sports records, Data on sleep, blood oxygen, and women’s health.
2. the sports page has a variety of sports modes, You can choose your favorite exercise mode Get some exercise.
3. Check the device link and health Settings on the device page Equipment setting, remote control photography, etc.
4. my page to view personal information, account management mobile phone numbers and other function Settings.

FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure condition without restriction.

FAQs

Unable to Bluetooth connect
Please make sure that the Bluetooth permission and positioning permission of the APP have been turned on. When the ring has no power or low power, the Bluetooth connection cannot be made. Please charge the ring

Inaccurate data
Please wear the ring correctly. The inner ring detection sensor is in close contact with the skin of the finger abdomen The ring has been bound The ring has a unique ID. If you need to bind a new APP account, please unbind the ring with the bound APP account. If you forget the APP account, please contact the manufacturer

Exemption ordinance

1. Normal wear and tear, including scratches and dents
2. The product contains consumable zero devices, such as batteries
3. Damage caused by non-compliance with the instructions
4. Product damage caused by force majeure, such as fire, flood, etc
5. Damage caused by unauthorized tampering or alteration of the product

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>