nVent 42U RDHX RackChiller Pro Hoses Kit Without Sensors User Manual
- June 1, 2024
- nVent
Table of Contents
nVent 42U RDHX RackChiller Pro Hoses Kit Without Sensors
Product Information
Specifications:
- Product Name: RackChiller Pro
- Model: SCHLAUCHSET OHNE SENSOREN (Hoses Kit without Sensors)
- Manufacturer: nVent
- Product Code: 60630-533_BET Rev.B
Description:
The RackChiller Pro is a cooling system designed to maintain optimal temperatures for various equipment in a rack setup. The SCHLAUCHSET OHNE SENSOREN model comes with hoses but without sensors.
Features:
- Top mounting for easy installation
- Color-coded components for easy identification (Blue for input, Red for output)
- Durable construction
Product Usage Instructions
Mounting:
- Ensure the RackChiller Pro is placed in a suitable location within the rack setup.
- Use the provided mounting hardware to secure the cooling system in place at the top of the rack.
Connection:
- Connect the Blue hose (input) to the water source or cooling unit.
- Connect the Red hose (output) to the equipment requiring cooling.
Power:
- Ensure the power supply is connected to the RackChiller Pro.
- Follow any additional power-related instructions provided with the cooling system.
Maintenance:
- Regularly check hoses for leaks or damage.
- Clean the system periodically to ensure efficient operation.
FAQ
Q: Can I use this cooling system without sensors?
- A: Yes, the RackChiller Pro SCHLAUCHSET OHNE SENSOREN model can function effectively without sensors, relying on manual input/output connections.
Product Overview
Note
- Tightening torques are given with a tolerance of ±15% unless otherwise stated.
- Only qualified and specialized personnel are authorized to make the connections
- For hinges on right side, the assembly must be symmetrical
- The instructions are illustrated with the bottom water connection. If the water connection is from the top, the installation must be symmetrical.
- The instructions are illustrated with the lower water connection. For the top water connection, the following parts must be swapped: the exchanger plugs and coupler are fitted at the bottom by default (for a water inlet at the top). if the water inlet is at the bottom, the parts must be dismantled at the bottom and reassembled symmetrically at the top:***
Parts
Installation Instruction
Adjust the length of the hoses between the 2 fixing clamps as short as possible, without reducing the opening by 90°.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>