FANTASY GZB1020-4 Indoor Fountain LED Light Instruction Manual

FANTASY GZB1020-4 Indoor Fountain LED Light

Product Information

• Specifications:
  • Product Name: Indoor Fountain with LED light
  • Versions: 23.10 1.0
  • Models Available:
  • FANTASY GZB1020-4
  • FELSEN-SPIEL GZB1021-4
  • KASKADEN-SPIEL GZB1022-4
  • MAGIC-BALL GZB1023-4
  • ALTAN GZB1024-4
  • PHOENIX-FLAMME GZB1025-4
  • FENG-SHUI-BUDDHA GZB1026-4
  • Website: www.profi-pumpe.de.

Product Usage Instructions

• Introduction:
  • Congratulations on purchasing our indoor fountain. Safety and operational efficiency are our top priorities.
• In General:
  • The indoor fountains are high-quality pump systems designed for indoor use, serving as an attractive centrepiece.
• Assembly Instructions:
  • Unpack all components and lay them on a flat surface.
  • Connect the pump to the rubber tube ensuring proper seating and no kinks in the cable.
  • Insert LEDs into the hose on the fountain body.
  • Mount the fountain attachments and connect the power cable.
  • Fill the container with clean water, preferably distilled water to reduce mineral build-up.
  • Plug into a power socket and ensure water flow starts.
  • Place the pump at the bottom of the fountain ensuring it is submerged.
• Maintenance:
  • Maintain the fountain by cleaning and changing water every 3 days.
  • Use distilled water for optimal performance.
  • Rinse the pump if debris is caught in the vents. Before winter storage, rinse the pump thoroughly to prevent damage.
• Frost:
  • If there is a risk of frost, empty, rinse, and store the fountain in a dry place to prevent damage.
  • Note: Ensure proper water levels to avoid dry run danger. Children and individuals with reduced abilities should use the pump under supervision.

FAQs

• Q: How often should I clean the fountain?
  • A: It is recommended to clean and change the water every 3 days for optimal performance.
• Q: Can children use the pump unsupervised?
  • A: Children should always be supervised when using the pump to ensure safe operation.

DIFFERENT MODELS

SAFETY INSTRUCTION AND WARNINGS

• Please read the user manual before using the device
• Warning sign
• Pull power plug
• Warning of electrical voltage

INTRODUCTION

• We would like to congratulate you on the purchase of our indoor fountain. We appreciate your trust. That‘s why functional security and operational safety stand by us in the first place.
• To prevent damage to persons or property, you should read this user manual carefully.
• Please observe all safety precautions and instructions for proper use of the pump. Failure to follow the instructions and safety precautions can result in injury or property damage.
• Please keep this manual with the instructions and safety instructions carefully at any time you can restore them.
• Please always download the latest version of the user manual of www.profi pumpe.de under „downloads“. This shall always prevail.

IN GENERAL

The Indoor fountains are high-quality fountain pump systems for indoor use. The perfect eyecatcher.

• It‘s recommended NOT to conduct yourself technical modifications. First, it is not certain whether these changes are technically correct and, secondly, because no guarantee can be granted.
• Transport damages are immediately to be reported to the package distributor and us in written form. Failure to give timely notice to the shipping company, and therefore rejected your claims from the transport company, so we can not accept these claims as well. In your legal obligation to cooperate to minimize damage, we point out expressly herewith.

ASSEMBLY INSTRUCTIONS

• Unpack all the water fountain components from the packaging and lie on a flat surface.
• Connect the pump to the rubber tube. Make sure the plug is properly seated and the cable is not kinked.
• Push the LEDs into or over the hose which is pre-mounted on the well body. Make sure everything is seated tight.
• Mount the fountain attachment onto the base. Guide the power cable through the side opening.
• Install the fountain top on the base, and ensure it is stable before continuing.
• Connect the power cable to the adapter.
• Fill the clean water into the container.
• Note: Distilled water is recommended to reduce mineral deposits and bacteria build-up.
• Insert the plug into the power socket. If installed correctly water will start to flow from the feature.
• Please note, that due to the shape of the slate, some water splashing out of the fountain is inevitable in the first few seconds.
• When all connections are complete, place the pump at the bottom of the fountain. Route the power cable to the outside.
• Fill the fountain with water. The pump must be completely submerged in water, otherwise the pump will be damaged.

MAINTENANCE

• Keep the fountain in good working condition by cleaning it and changing the water every 3 days. Using distilled or purified water will give the best performance.
• If debris is caught in the intake vents of the pump, disconnect the pump from any power sources and rinse the pump under clean running water.
• Before storing the pump in winter it is absolutely important to rinse it with clean water.
• Any dirt particles remaining in the pump will dry out on the pump shaft during the time of storage and cause irreparable damage.

Frost

• Frost can cause damage to the indoor fountain and pump.
• If there is a risk of frost, the indoor fountain and the pump must be emptied, rinsed with clean water and stored in a dry place.
• Then you will enjoy it for a very long time!

SECURITY TIPS

• Obey valid regulations on the electrical security
• Never run the pump dry
• Pumping inflammable, as well as all other aggressive liquids is prohibited
• Pay attention to the medium temperature max. 35°C
• The mains plug must be disconnected before carrying out any work on the garden fountain
• Never pull the pump on the electrical cable or pressure hose
• Avoid cross-section narrowing
• Pay attention to the given particle size
• The mains plug is intended for indoor use only
• During longer unused times, clean the pump, wash it out with clear water, dry and store it at room temperature
• Test wells for enough flowing water (dry run danger)
• The pump may be used by children aged 8 years and above as well as persons with reduced physical, sensory or mental abilities or those who lack skills, experience and knowledge only if they are supervised.
• These aforementioned persons should only use the appliance while adhering to safe instructions and resulting dangers.
• Cleaning and maintenance must not be carried out by children without supervision.

THE MANUFACTURER EXPLAINS:

• To take over no responsibility in the case of accidents or damages based on carelessness or disregard for the instructions in this manual.
• To reject every responsibility for the damages which originate from the improper use of the device.

GUARANTEE REGULATIONS

For all manufacturing and material defects, the statutory warranty applies. In these cases, we take the replacement or repair of the device. Shipping costs shall be borne by our company, except as required by law. Please report the warranty on our service platform https://www.profi-pumpe.de/information.php. We will inform you how to proceed with case-related. Returns please sufficient postage. Unfortunately prepaid returns can not be accepted because they are filtered out before delivery. Our service we provide in Germany.

The warranty does not cover:

• Material wear (sealing rings, impeller wheels, impeller chambers)
• Unjustified interventions or changes in the pump
• Damages by self-fault
• Improper servicing and improper use
• DRY RUNNING (Also partially!) of the pump
• Moreover, we give no damage compensation for secondary damages!

RECOGNISING AND REPAIRING MISTAKES

Check hose connection systems
The pump could have a leak| Check the pump for moisture damage
Coarsening or fountain nozzles are dirty| Disassemble and clean the tube and the fountain nozzle

NOTES ON PRODUCT LIABILITY

• We point out, that we are only liable for damages under the Product Liability Act, which are caused by our units if no changes were made to the equipment.
• If repairs are carried out by our authorized service, we are only liable if original spare parts and accessories were used.

NOTES ON DISPOSAL

• Electro devices of our company, labelled with the symbol of the crossed trash bin, are not permitted to be disposed of in your household garbage.
• We are registered at the German registration department EAR under the WEEE-No. DE79535656.
• This symbol means that you’re not, allowed to treat this product as a regular household waste item – it has to be disposed of at a recycling collection point of electrical devices.
• This is the best way to save and protect our earth. THANK YOU FOR YOUR SUPPORT!

EU DECLARATION OF CONFORMITY

The undersigned, Amur S.à r.l., 36, Rue de la Gare, L-5540 Remich, certifies that the products named overleaf, namely FANTASY, FELSEN-SPIEL, KASKADEN- SPIEL, MAGIC-BALL, ALTAN, PHOENIX-FLAMME, FENG-SHUI-BUDDHA as placed on the market, comply with the relevant provisions listed below, the relevant EU harmonised directives and the EU standard for safety. This declaration of conformity applies insofar as no modifications are made to the product. The sole responsibility for issuing this declaration of conformity lies with the manufacturer.

The sole authorised person to keep the technical documents:

• Amur S.à r.l. – 36,
• Rue de la Gare
• L-5540 Remich

Low Voltage Directive (2014/35/EU)

• EC Electromagnetic Compatibility Directive (2014/30/EU)
  • Following harmonized standards: EN 61000-6-3:2007/A1:2011; EN 61000-6-1:2007
  • ROHS Directive (2011/65/EU): IEC 62325-5:2013, IEC 62325-4:2013+AMD1:2017, IEC 62325-7-1:2015, IEC 62325-7-2:2017, IEC 62325-6:2015, IEC 62325-8:2017
• Signed for and on behalf of:
  • Amur S.à r.l.
  • Remich, 17.10.2023
  • i.V. Dipl. Phys. Peter Neumüller
  • Technical Manager

IMPORTANT! WATER QUANTITY REGULATOR

• Our indoor fountains are equipped with different pumps depending on their size.
• The pumps are fitted with regulators that allow individual adjustment of the water flow.
• The most common types of regulators are listed below (please note the +/- symbol on the pump).

TECHNICAL DATA

Amperage
Pump| Pump power
Max. pump capacity
Max pump height
Max. water temperature
Length of cable
Protective class
LED| LEDs
Length of cable
Brunnen| Dimension (LxWxH)
Protective class
 | English
Adapter | Voltage
Amperage
Pump| Pump power
Max. pump capacity
Max pump height
Max. water temperature
Length of cable
Protective class
LED| LEDs
Length of cable
Brunnen| Dimension (LxWxH)
Protective class
Adapter | Voltage
---|---
Amperage
Pump| Pump power
Max. pump capacity
Max pump height
Max. water temperature
Length of cable
Protective class
LED| LEDs
Length of cable
Brunnen| Dimension (LxWxH)
Protective class

The mains plug is intended for indoor use only

SPARE PARTS

The spare parts are available for purchase from AMUR S.à.r.l. at www.profi- pumpe.de.

For technical specifications of the spare parts, please refer to the table „TECHNICAL DATA“. Please note our disposal advice in section 9.

Imprint

• Amur S.à r.l.
• www.amur.lu.
• Email: info@amur.lu.
• Tel.: (+49) 0611-9 45 87 76-0
• Fax: (+49) 0611-9 45 87 76-11
• Version 23.10 1.0

Technical changes, misprints and mistakes are reserved! The latest information about our products can be found online https://www.profi- pumpe.de.

References

• Service - Service
• Amur
• Profi-Pumpe.de Ihr Online-Shop für Pumpen und Pumpenzubehör
• Profi-Pumpe.de Ihr Online-Shop für Pumpen und Pumpenzubehör
• Service - Service

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>