HIFI WALKER T10 Air Bone Conduction Bluetooth Headphones Instructions
- June 13, 2024
- HIFI WALKER
Table of Contents
HIFI WALKER T10 Air Bone Conduction Bluetooth Headphones
Button Instruction
① Indicator light
② Magnetic charging port
③ Volume “-” button
④ Power button
⑤ Volume “+” button
⑥ Microphone
Wearing Instruction
Take the headphones and turn it behind the base of the neck. Put the ear hook on your ears. After that, please enjoy music.
How to Set Up HIFI WALKER T10 Air
-
Charging
Charge the headphones using the included magnetic charging cable. The LED indicator will change from red to blue when charging is complete. It typically takes approximately 2 hours for a full charge. -
Pairing & Connecting
Start with your headphones off. Press and hold the power button for 3-5 seconds until the T10 Air says “Bluetooth Mode” and the LED indicator flashes red and blue.
Open the Bluetooth menu on your device and select “T10 Air.” The T10 Air will say “Connected” and the LED indicator will flash blue once. -
Bluetooth/MP3 Mode Switching
You can easily switch between Bluetooth and MP3 modes by double-clicking the power button. If you double-click the power button to enter MP3 mode, the T10 Air will indicate “TF Card Mode.” Please note that the device automatically defaults to Bluetooth mode when powered on.
Song Download:
Connect the original charging cable to the computer and headphones, and you can access the USB drive to copy songs from the computer to the USB drive.
Quick Reference Chart
| Function | Operation | Indicator |
|---|---|---|
| Power On | Press and hold Power button for 3 seconds | Light On |
| Power Off | Press and hold Power button for 3 seconds | Light Off |
Music Play
| Function | Headphone status | Indicator |
|---|---|---|
| Increase volume | Play music | Click “ ” |
| Reduce volume | Play music | Click “ ” |
| Last song | Play music | Press and Hold “ ” |
| Next song | Play music | Click and Hold “ ” |
| Pause | Play music | Click the power button |
| Resume | Pause | Click the on/off button |
Answer Call
| Function | Headphone status | Indicator |
|---|---|---|
| Answer the call | Incoming call | Short press the power button to answer |
| Decline the call | Incoming call | Long press the power button for 1 second to |
hang up
volume control| During call| click “ ” / “ “
Phone/Blue
- tooth Head
- phone switch
| During call| Long press and hold the power button for 2 second
Voice Control
(The phone needs to support the voice wake-up function)
| Function | Headphone status | Operation |
|---|---|---|
| Voice Control | Bluetooth is connected | Press and hold the power button for 3 |
second
Note: In Bluetooth connected mode, press and hold the power button for 3 seconds to wake up the device. Once you hear the prompt sound, you can use voice commands to control your phone, saving time and enabling convenient smart operations.
Indicator
| Charging in progress | Constant red light |
|---|---|
| Charging complete | Constant blue light |
| Searching for pairing | Red and blue lights flashing alternately |
| Bluetooth music playback | Blue light flashing slowly for 5 seconds |
Specification
| Brand | HIFI WALKER | Model | T10 Air |
|---|---|---|---|
| Bluetooth Version | Bluetooth 5.3 | Frequency response rang | 20-20KHz |
| Wireless Range | 10m | Signal-to-noise ratio | >85dB |
| Continuous Play | Up to |
8 hours
| Standby time| 110 hours
Battery| Polymer battery| Charge Time| 2 hours
Battery capacity| 230mAh| Input| 5V/180mA
Water resistance| IPX8| Built-in Memory| 32GB
Compatible profiles| a2dp1.3.2\ avctp1.4\ avdtp 1.3\ avrcp 1.6.2\hfp
1.8\spp1.2\rfcomm1.1\pnp1.3\ hid1.1.1\sdpcore5.3\l2cap core5.3
Music format support| WAV, FLAC, WMA, AAC, MP3, APE, M4A
Maintenance and Cleaning:
- The headphones should not be immersed in seawater/saltwater for an extended period. After use, rinse with fresh water and dry the magnetic charging area promptly to prevent corrosion.
- If not in use for a long time, please fully charge the headphones at least once a month.
- Do not disassemble any parts of the product without authorization. If any defects are found, immediately stop using the product and contact the seller for after-sales support.
- After each workout, wipe the surface of the headphones clean, especially the magnetic charging area. Promptly clean and dry to prevent sweat and saltwater from corroding the charging port, which may affect the product’s lifespan.
- Keep the product away from fire, heat sources, freezing sources, and chemicals. Avoid violent impact, disassembly, or squeezing of the product. Please use a charging adapter with an output of 5V1A or lower.
Customer Support
support@hifiwalker.com
If you have any questions about this headphones, or technical questions, or
you think it is malfunctioning. please contact our support center.
Warranty and After-sales Service
We make every effort to ensure the quality of our products, but if the product
is damaged or soiled, please contact us by email.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>