Sonew CC53 CVBS Ground Loop Isolator Instruction Manual
- June 1, 2024
- Sonew
Table of Contents
Sonew CC53 CVBS Ground Loop Isolator
Specifications
- Product Name : Ground Loop Isolator
- Power : Passive (no power required)
- Supported Formats : TVI, CVI, AHD, CVBS
- Isolation Voltage: Max. 720P, 1080P, 5MP
- Insulation Resistance : 600V DC, 100M Ohm
- Input/Output Resistance : 75ohm
- Frequency Response: 0-3dB at 10MHz
Features
- 4-in-1 Ground Loop Isolator compatible with TVI, CVI, AHD & CVBS
- BNC Male to BNC Female with mini cable
- Passive device, no power required
- Prevents video-signal distortion caused by video ground loops
- Eliminates picture tearing, cross talk, and rolling
- Prevents power cables laid by others from interfering with the CCTV system
- Works perfectly with DVR to provide immunity from DVR interference
- Built-in TVS (Transient Voltage Suppressors) for surge protection
Product Usage Instructions
Installation
- Identify the CCTV camera system points with different ground potentials.
- Disconnect the coaxial cable transmitting the video signal between these points.
- Connect the Ground Loop Isolator between the disconnected ends of the coaxial cable.
- Ensure a secure connection and proper alignment of BNC connectors.
- Reconnect the coaxial cable to the BNC connectors of the Ground Loop Isolator.
Usage
Once installed, the Ground Loop Isolator will effectively reduce ground loop interference and prevent video-signal distortion in your CCTV camera system. It is a passive device that requires no power source and provides surge protection for enhanced performance.
FAQ
- Q: Can the Ground Loop Isolator work with both analog and digital CCTV cameras?
- A: Yes, the Ground Loop Isolator supports analog formats like CVBS as well as digital formats like TVI, CVI, and AHD.
- Q : Does the Ground Loop Isolator require any additional power source for operation?
- A : No, the Ground Loop Isolator is a passive device that does not require any external power source to function.
Video ground loop isolators are passive devices that reduce ground loop interference with CCTV signals and can be easily installed in new or existing CCTV camera systems. These devices are useful where a video signal is transmitted via coaxial cable between points with different ground potentials.
Features
- 4-in-1 Ground Loop Isolator compatible with TVI, CVI, AHD & CVBS.
- BNC Male to BNC Female with mini cable.
- Passive, no power required.
- Prevents video-signal distortion caused by video ground loops.
- Eliminates picture tearing, cross talk and rolling.
- Prevents power cables laid by others interfering with the CCTV system.
- Perfect to work with DVR to immunity DVR interference, for extra interference rejection.
- Built-in TVS (Transient Voltage Suppressors) for surge protection.
Specification
Read User Manual Online (PDF format)
Loading......