IMI TA 15576SP Control Valves Instructions
- June 1, 2024
- IMI TA
Table of Contents
IMI TA 15576SP Control Valves
Product Information
Specifications:
- Product Name: C-part for TA-Modulator DN 150-200
- Article Numbers:
- 15576SP
- 16162SP
- 16231SP
- 16303SP
- Available Sizes:
- DN 150 NF
- DN 150 HF
- DN 200 NF
- DN 200 HF
- Torque: 54Nm
- Socket Wrench Size: DN 150 = SW 8, DN 200 = SW 10
Product Usage Instructions
- Ensure the correct size C-part is selected based on the pipe diameter (DN) and type (NF/HF).
- Use a torque wrench to tighten the C-part to the specified torque of 54Nm.
- For DN 150, use a socket wrench size of SW 8; for DN 200, use SW 10.
- Follow the installation steps provided in the TA-Modulator user manual for proper assembly.
FAQ
Q: Can I use this C-part for other Modulator models?
A: This C-part is specifically designed for TA-Modulator DN 150-200 and may not be compatible with other models.
Q: What should I do if the torque specifications are exceeded during installation?
A: It is crucial not to exceed the specified torque of 54Nm to prevent damage to the product. If exceeded, loosen and re-tighten following the correct torque settings.
Q: Where can I find more information about technical alterations?
A: For any information regarding technical alterations, visit our website at
www.imi-hydronic.com or contact our customer
support team.
Models
Article No.
- 15576SP DN 150 NF
- 16162SP DN 150 HF
- 16231SP DN 200 NF
- 16303SP DN 200 HF
Installation
We reserve the right to introduce technical alterations without prior notice. www.imi-hydronic.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>