Marshall CV506-H12 Miniature High-Speed Camera User Manual

: June 6, 2024
: Marshall

Table of Contents

Marshall CV506-H12 Miniature High-Speed Camera User Manual
- Menu Structure
- OSD Joystick
- WB CONTROL
- AE CONTROL
- DAY / NIGHT
- AUDIO
- IMAGE CONTROL
- SPECIAL
- SETUP
- RESET
- EXIT
- TROUBLESHOOTING
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Marshall CV506-H12 Miniature High-Speed Camera User Manual

Marshall CV506-H12

OSD Joystick

1 SET Used to access the menu and confirm selection.
2 UP Used to move the cursor up
3 DOWN Used to move the cursor down
4 LEFT Used to move the cursor to left and change the value.
5 RIGHT Used to move the cursor to right and change the value.

Press SET button to access the MAIN MENU.

WB CONTROL

Select WB CONTROL using the UP or DOWN button. You can change between AUTO, ATW, PUSH, and MANUAL using the LEFT or RIGHT button.

AUTO: Controls the automatic adjustment of the light source’s color temperature to 3,000°K ~ 8,000°K.
ATW: Continuously adjusts camera color balance in accordance with any change in color temperature. Compensates for color temperature changes within the range of 1,900°K to 11,000°K.
PUSH: Color temperature will be manually adjusted by pushing the OSD button. Place the white paper in front of the camera when OSD button is pressed to obtain optimum result.
MANUAL: Select this to fine-tune White Balance manually.
You can adjust the blue and red tone level manually.

1.  **BLUE:** Adjust the Blue tone of the image. (0~20)
2.  **RED:** Adjust the Red tone of the image. (0~20)

INDOOR: Select this to adjust white balance to indoor lighting condition.
OUTDOOR: Select this to adjust white balance to outdoor lighting condition.

WB CONTROL

Adjust White Balance first by using the AUTO or ATW mode before switching to MANUAL mode.
White Balance may not work properly under the following conditions. In this case, select the ATW mode.
- When the ambient illumination of the subject is dim.
- If the camera is directed towards a fluorescent light or installed in a place where illumination changes dramatically, the White Balance operation may become unstable.

AE CONTROL

Select AE CONTROL using the UP or DOWN button. You can select one sub-mode using the UP or DOWN button.

AE CONTROL

AUTO: Adjusts the exposure level automatically. Detailed fine tuning options are available under this menu.
SHUT FIX: Provides more detailed shutter speed options. All other controls are tuned for the selected shutter speed.
IRIS FIX: Provides more detailed iris control options. All other controls are tuned for the selected iris setting.
AGC FIX: Provides more detailed gain option. All other controls are tuned for the selected gain value.

SHUTTER: Speed can be set at auto or manual. (1/30~1/10,000)
AGC MAX: Used to set maximum gain value to control the video noise caused by Auto Gain Control. (Off, Low, Middle, High, DMIN, DMID, DMAX)
SENS UP: Controls the digital slow shutter to allow extra light into the camera and adjust the picture quality. (Off, x2~x10)
AE BRIGHT: Select this to adjust auto exposure brightness levels. (0~10)
IRIS SPEED: Electronic Iris speed can be controlled, for DC Iris lens only. (0~5)
LENS MODE: Lens setting will be optimized for selected enviornment, for DC Iris lens only.
FLK CONTROL: Provides a proper image sensor frequency to match the power frequency in order to minimize video flicker.

DAY / NIGHT

Select DAY / NIGHT using the UP or DOWN button. You can select one sub-mode from AUTO, COLOR, and NIGHT using the UP or DOWN button.

MODE: Set camera to either color mode or B&W mode. (Day, Night)
DAY: When set to DAY mode, camera stays in color and IR cut filter is engaged.
NIGHT: When set to NIGHT mode, camera stays in B/W and IR cut filter is removed.

NIGHT COLOR: When on, camera stays on color mode. Night (B&W) can be selected from this mode. (On, Off)
COLOR BURST: Signal ON or OFF can be set for CVBS signal. (On, Off)

DAY - NIGHT

AUDIO

Select AUDIO using the UP or DOWN button and enter ON using SEL button. You can select one sub-mode using the UP or DOWN button.

MIC / LINE: When using audio microphone use MIC mode, when using other audio sources use LINE setting.
AUDIO LEVEL: Select this to adjust audio levels, manually.
MIC ATTENUATOR: Audio attenuation can be controlled from this menu to minimize the audio noise level.

1.  **SAMPLE BITS:** Select the bit depth of audio.

AUDIO

IMAGE CONTROL

Select IMAGE CONTROL using the UP or DOWN button.
You can select LENS SHADING, CONTRAST, HUE, And EDGE ENHANCE using the UP or DOWN button.

IMAGE CONTROL

LENS SHADING: Corrects inconsistent brightness level in the image.
CONTRAST: Adjust the image contrast level value.
BRIGHTNESS: Adjust the image brightness level value.
SATURATION: Adjust the image saturation level value.
HUE: Adjust the image hue level value.
EDGE ENHANCE: Adjust the image sharpness level.
AUTO SATURATE: Decrease saturation automatically when noise scene is detected.
BLACK LEVEL: Adjust the image black level value.
GAMMA CORRECT: Adjust the image output gamma level.
DNR: Reduces video noise at low ambient light.
Select the DNR level from OFF, LOW, MIDDLE, and HIGH using the LEFT or RIGHT button.

SPECIAL

Select SPECIAL using the UP or DOWN button.
You can select DEFOG, MOTION DETECT, BACKLIGHT, DEFECT PIXEL, and FLICKER DETECT using the UP or DOWN button.

SPECIAL

DZOOM: Digitally zoom the video by the desired ratio.
DEFOG: This feature will help increase visibility in extreme weather conditions such as fog, rain or any other luminous setting.
DWDR: This feature enables the user to view both the object and the background more clearly when background is too bright.
DIS: This feature enables digital image stabilization to prevent the image from being shaken.
BLACKLIGHT: Adjust blacklight compensation by choosing either BLC or HLM from this menu.
BINNING: Enable or disable pixel binning.
DEFECT PIXEL: Advanced defective pixel correction menu.
DISP FUNCTION: Display effects such as freeze mirror, rotation, and style can be applied from this menu.
FLICKER DETECT: Adjust the image sensor frequency to match the power frequency.
PRIVACY: Mask an area you want to hide on the screen by applying the privacy zones.

SETUP

CAMERA setup can be adjusted from this menu.
You can select CAMERA ID, Communication, System Info, and Output Format using the UP or DOWN button.

SETUP

CAM TITLE: Camera title can be turned ON or OFF.
COMMUNICATION: VISCA communication can be adjusted.

1.  **CAM ID:** Camera ID can be setup. (0~7)
2.  **ID DISPLAY:** Camera ID display can be displayed.
3.  **BAUDRATE:** Camera baudrate can be set. (2400, 4800, 9600, 19200, 38400)

SYSTEM INFO: Camera information can be found under this menu.
OUTPUT FORMAT: Camera resolution and frame rate can be set.
(1080 by default)
Select the FRAME RATE using the LEFT or RIGHT button. Available Frame Rates are:
1920 x 1080p 120, 100, 60, 59.94, 50, 30, 29.97, 25, 24, 23.98
1920 x 1080i 60, 59.94, 50
1280 x 720p 120, 100, 60, 59.94, 50

RESET

Select RESET using the UP or DOWN button.

RESET: Reset the camera settings the factory defaults or user setting value

RESET

ON: Set the camera setting to either “FACTORY” or “USER” of “CHANGE” menu. Make sure to select the right mode from “CHANGE” before defaulting the camera.
RESET MODE: Select the desired setting mode.
Select from USER or FACTORY using the LEFT or RIGHT button.

1.  **USER:** Select “USER” if setting value user saved last is needed.
2.  **FACTORY:** Select “FACTORY” if factory default setting is needed.

“FRAME RATE”, “CAM ID”, and “BAUDRATE” will note change.

To RESET Camera to default settings (1920x1080p30fps) power-cycle the camera then use the following combo on OSD Joystick: UP, DOWN, UP, DOWN, then push and HOLD joystick in for 5 seconds then release.

EXIT

Select EXIT using the UP or DOWN button.

EXIT

SAVE: Exit the setup after saving the value changes.

TROUBLESHOOTING

Before sending the camera for repair, please check below to make sure that the camera is installed correctly. If it still does not perform adequately, please consult with your supplier.

TROUBLESHOOTING

Warranty

Marshall Electronics warranties to the first consumer that this device will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of two years from the purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to the consumer. This warranty does not apply to the product exterior or cosmetics. Misuse, abnormal handling, alterations or modifications in design or construction void this warranty. No sales personnel of the seller or any other person is authorized to make any warranties other than those described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.

Due to constant effort to improve products and product features, specifications may change without notice.