BST55-2.1 Active 2.1 Sound System Instruction Manual
- June 1, 2024
- BST
Table of Contents
BST55-2.1 Active 2.1 Sound System
DSP curves
MUSIC: Dedicated for use with recorded music and audio files.
DJ: Applies more bass to the sound
LIVE: For live music
SPEECH: Reduces the bass to make the voice clearer
REAR PANEL
ASSEMBLY OF THE SATELLITES AND THE STAND
IN/OUT CONNECTORS ON THE SATELLITE MODULES
SAFETY RECOMMENDATIONS
CAUTION DO NOT OPEN THE HOUSING SHOCK HAZARD
The exclamation point triangle is used to alert the user to important
operating or maintenance instructions
The lightning bolt triangle is used to alert the user to the risk of electric
shock
Accordance with the requirements of UK standards
Class I protection: Connect only to an earthed mains outlet
The product is for indoor use only
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased.
They can take this product for environmentally safe recycling.
- This device is only allowed to be operated with an alternating current of max. 100-240V~ 50/60Hz and was designed for indoor use only.
- Operate the device only after having familiarized yourself with its functions. Do not permit operation by person not qualified for operating the device. Most damages are the result of unprofessional operation.
- Please use the original packaging if the device is to be transported.
- For safety reasons, please be aware that all modifications on the device are forbidden. Furthermore, any other operation may lead to short-circuit, burns, electric shock, crash, etc. If this device will be operated in any way different to the one described in this manual, the product may suffer damages and the guarantee becomes void.
- To prevent electric shock, do not remove top or bottom covers.
- No user serviceable parts inside.
- Refer servicing to qualified servicing personnel.
- Disconnect power cord before removing back panel cover to access gain switch.
- No naked flame sources, such as lighted candles, should be placed on the apparatus
- The unit should only be used in moderate climates
- This unit should be cleaned only with a dry cloth. Avoid solvents or other cleaning detergents
- A minimum distance of 0.5m around the unit must be kept to ensure sufficient ventilation and avoid overheating
- We strongly recommend the use of high-grade cables and connectors for the transmission of audio signals. Inferior quality materials cannot supply acceptable audio quality or corrosion protection.
DISCONNECT DEVICE: Where the MAINS plug or an appliance coupler is used
as the disconnect device, the disconnect device shall remain readily operable.
WARNING! To reduce the risk of electric shock, do not expose this
equipment to rain or moisture!
FEATURES
- 18″ /46cm 400W RMS subwoofer fitted with 3 x 400W RMS Class D amplifiers for the subwoofer and 2 satellites.
- 2 x 400W RMS satellite speakers, each with 3 compartments featuring 2x 4″/10cm midrange and 1x 1″ tweeter per compartment (total of 6 midrange and 3 tweeters per satellite).
- DSP with 4 pre-programmed sounds
- 2 XLR Line Inputs and Outputs
- 2 satellite outputs
- Level meter, clipping and limiter
- MDF subwoofer cabinet
- Supplied with 2 floor stands and connection cables
Rear Panel
-
POWER LED: Lights up when the box is switched on
SIGNAL LED: Lights up when the inputs are receiving a signal
LIMIT LED: This LED lights up when the volume reaches a dangerous level for the speakers. Please reduce the gain controls immediately to protect the speakers. -
MONO/STEREO switch
-
XLR combo line inputs: XLR combo inputs for connecting sources such as mixers, instruments or microphones.
-
XLR combo line outputs: Send the L/R signal from the inputs to another loudspeaker or subwoofer.
-
Left and right satellite connections
-
DSP mode selector: Rotate to select one of the DSP preset modes
-
Subwoofer Gain Control
-
Satellite Gain Control
-
On/Off switch
-
Mains input: Connect the supplied power cable to a suitable wall socket.
CONNECTING THE SATELLITE SPEAKERS
Assemble the satellite speakers as shown in the diagram on page 2 of the
manual.
Once they are assembled and mounted on the stand, connect the supplied cable
to the Right satellite output (5) and the other end to the IN/OUT socket of
the 1st satellite. Connect the other IN/OUT connector of the 1st element to
the IN/OUT connector of the 2nd element, and so on. Repeat this procedure for
the left satellite speaker.
SPECIFICATIONS
Input power ……………………………………………………………………………………………………100-240V~ 50/60Hz
RMS power ……………………………………………………………………………………………………………………3x 400W
Magnets ………………………………………………………………………………..Subwoofer: 92oz, midranges: 11oz
Voice coils ……………………………………………………………………..Sub: 3’’-75.5mm ; midrange:
1’’-25.5mm
Sensitivity 1W/1m ………………………………………………………………………………………………………………. 97dB
Max. SPL ………………………………………………………………………………………………………………………….. 133dB
Total weight …………………………………………………………………………………………………………………….. 82.5kg
BST55-2.1
ACTIVE 2.1 SOUND SYSTEM 1200W RMS 18’’ SUB + 2 SATELLITE BOXES ON STANDS
SYSTEME 2.1 ACTIF DE SONORISATION 1200W RMS
AVEC SUB 18’’ /46cm +2 ENCEINTES SATELLITE SUR PIEDS
CODE: 17-2551
BSTDJPRO
Follow us on Instagram
|
Any problem or question?
Join us on facebook
|
Download the manual in other languages from our website
---|---|---
CUSTOMER SUPPORT
Rue F. Englert 17 · Bt 2 ·
B-1480 TUBIZE · Assembled in PRC
© 2023 COPYRIGHT LOTRONIC SA
Download the manual in other languages
from our website
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>