BST F150 BSSP Pair Extreme Camber Caster Alignment Bushing Kit Instruction Manual
- June 1, 2024
- BST
Table of Contents
BST F150 BSSP Pair Extreme Camber Caster Alignment Bushing Kit
Product Information
Specifications:
- Product Name: Adjustable Caster Camber Bushing
- Installation: Should be done by a qualified mechanic
- Adjustment Range: Neutral position or 0-degree position
Product Usage Instructions
Installation:
- Dial the “N” of the inner bushing to the slot of the outer bushing
- Install the adjustable bushing in the neutral or 0-degree position
- Take a new alignment reading to determine the camber and caster changes needed
- Measure and record vehicle caster and camber
- Refer to the appropriate chart for your vehicle model
- Find the intersection of the required camber and caster changes on the chart
- The upper letter represents the code for the INNER bushing piece
- The lower letter is the reference for positioning the OUTER adjuster
Note:
It is important to install the bushing correctly even if the adjuster type and position are unclear initially.
FAQ
- Q: Do I need a qualified mechanic to install these bushings?
- A: Yes, it is recommended to have a qualified mechanic install these parts to ensure proper installation.
- Q: What should I do if I am unsure about the adjuster type and position?
- A: Follow the instructions provided in the manual carefully and make sure to align the bushings as instructed.
Adjustable Caster Camber Bushing Installation
PS: These parts should be installed by a qualified mechanic
Dialing the “N” of the inner bushing to slot of the outer bushing Install the adjustable bushing in the neutral position or 0-degree position by dialling the “N” of the inner bushing to the slot of the outer bushing Take a new alignment reading to determine the amount of positive or negative camber and caster changes necessary, measure and record vehicle caster and rather Refer to the proper chart for the vehicle model Follow both measurements (camber caster changes required) to their intersection on the chart, You will find two letters, the upper letter represents the code for the INNER bushing piece. The LOWER letter is the reference for positioning the OUTER adjuster
Note: It doesn’t matter at this point in what position the bushing is installed This is necessary since it is often unclear what adjuster type and position
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>