ZEBRA ET65 Accessories Business Tablet User Guide
- June 1, 2024
- ZEBRA
Table of Contents
- ZEBRA ET65 Accessories Business Tablet
- Product Information
- Product Usage Instructions
- FAQ
- Accessories that power devices
- Vehicle Power Supplies and Cables
- Vehicle Mounts
- Warehouse Keyboard for Vehicles
- AC/DC Power Supply
- Accessories that enable productivity solutions
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ZEBRA ET65 Accessories Business Tablet
Product Information
Specifications
- Model: ET60 and ET65
- Operating System: Android
- Business tablet type: Rugged
- Revision Date: May 2023
Product Usage Instructions
Accessories that Power Devices
For vehicle installations, the following accessories are available:
- Vehicle Cradles
- Vehicle Power Supplies and Cables
- Vehicle Mounts
- Warehouse Keyboard for Vehicles
FAQ
- Q: How do I install the Vehicle Dock for my ET60/ET65?
- A: To install the Vehicle Dock, follow these steps:
- Choose the appropriate Vehicle Dock model based on your requirements.
- Mount the Vehicle Dock securely in your vehicle using compatible mounts.
- Connect the Vehicle Power Supply or Cable to the Vehicle Dock for power.
- Your ET60/ET65 tablet should now securely fit into the Vehicle Dock for charging and use.
Accessories that power devices
Vehicle Docks
Vehicle Dock Charging, 2 x USB Type A, 1 x RS232
SKU# CRD-ET6X-VEHDK-CON-01
- Small design, Quick release, VESA mount pattern
- IP66, Extreme shock, vibration and thermal shock testing – built to survive the constant pounding
- Heated pogo pins to avoid corrosion and loss of connection
- 2 USB Type-A ports and one serial port to connect peripherals
- All ports are securely covered in a compartment
- Allows locking the ET6x
Vehicle Dock with Antenna Pass Through
SKU# CRD-ET6X-VEHDK-PTA-01
- Small design, Quick release, VESA mount pattern
- IP66, Extreme shock, vibration and thermal shock testing – built to survive the constant pounding
- Heated pogo pins to avoid corrosion and loss of connection
- 3 antenna pass-throughs for strong GPS and wireless signals
- 2 USB Type-A ports and one serial port to connect peripherals
- All ports are securely covered in a compartment
- Allows locking the ET6x
Vehicle Power Supplies and Cables
DC/DC Power Supplies
- 9-60 VDC: SKU # 450083
- 50-150 VDC: SKU# 45008 4
- To be installed between the vehicle dock and the vehicle battery
- Isolated
- Check the voltage of the vehicle before selecting the variant
Cigarette Lighter Adapter (CLA) to Vehicle Dock
- SKU# 450143
- Power the Vehicle Dock from a 12V cigarette lighter
- To be installed between the vehicle dock and the cigarette lighter
Direct Wire Kit
- SKU# 300039
- To connect the DC/DC power supply with the Vehicle Dock
DC Power Adapter to VC DC Power Cable with CPC Connector
- SKU# CBL ET ADPA1 1
- Replace a legacy Zebra VC and reuse the existing DC power cable
- To be installed between the existing DC power cable and the DC/DC power supply
DC Power Adapter to legacy LXE VC DC Power Cable
- SKU#ACC PWRCBL01
- Replace a legacy LXE/Honeywell VC and reuse the existing DC power cable
- To be installed between the existing DC power cable and the DC/DC power supply
AC/DC Power Supply
- SKU# 450020
- 100 240 VAC in, 14 VDC out
- To power the vehicle dock from a regular 110/220 VAC outlet
Please order AC cable separate
- 450040 (for US)
- 450047 (for Australia/New Zealand)
- 450042 (for EU)
- 450041 (for UK)
- ACC L10LINECORD TW (for Taiwan)
- ACC L10LINECORD JP (for Japan)
- ACC L10LINECORD CN (for China)
Vehicle Mounts
- The Vehicle Docks have the VESA mount pattern and can be used with a range of 3rd party mounts.
Warehouse Keyboard for Vehicles
Warehouse Keyboard
- Alphanumeric
- 12 direct Function keys
- Field replaceable elastomer and cable
- IP66, -30 to +50 C, condensing environments
- Dimmable backlight
- Controller chip with build-in temperature compensation
- Heated board and drainage system for condensing environments
- AMPS mounting holes pattern
AC/DC Power Supply
- SKU# PWR-BGA15V45W-UC2-WW
- 100-240 VAC in, 14 VDC out
- To power the tablet from a regular 110/220 VAC outlet
Please order AC cable separately:
- 450040 (for the US)
- 450047 (for Australia/New Zealand)
- 450042 (for EU)
- 450041 (for UK)
- ACC-L10LINECORD-TW (for Taiwan)
- ACC-L10LINECORD-JP (for Japan)
- ACC-L10LINECORD-CN (for China)
Batteries
Standard Battery
- SKU# BTRY-ET6XA-9AH-01
- ET6x Android Standard Battery, 9.3 Ah
- Zebra’s PowerPrecision+ batteries provide the intelligence to better manage a battery pool.
- Obtain advanced battery state of health information including charge level and battery age based on usage patterns.
Extended Battery
- SKU# BTRY-ET6XA-18AH-01
- ET6x Android Extended Battery, 18.7 Ah
- Zebra’s PowerPrecision+ batteries provide the intelligence to better manage a battery pool.
- Obtain advanced battery state of health information including charge level and battery age based on usage patterns.
No Cells Battery
- SKU# BTRY-ET6X-0AH-01
- Battery housing without cells
- Cost saving and elimination of battery maintenance in fixed mount installations
Accessories that enable productivity solutions
Active Stylus
- SKU# SG ET8X STYLUS1 01
- Allows for a large range of pressure sensitivity, tilt detection and hover capability.
- IP55 water and dust protected.
- Two side buttons for easy erase and menu access.
- Can be tethered to a tablet with SG
- ET5X SLTETR 01 (sold separately).
- Can be secured to a tablet with a Pen Loop Holder (SG
- ET8X PENLOOP1 01) or inserted into handle SG ET8X HANDLE1 01 (sold separately).
- Uses one AAAA battery, included.
Stylus Holder
- SKU# SG ET8X PENLOOP1 01
- Adhesive Loop attaches to the rear of the tablet
Coiled Tether
- SKU# SG ET5X SLTETR 01
- Used to tether the stylus to the tablet.
- Can be attached to tether points on device corners
Passive Stylus
- SKU# SG STYLUS TCX MTL 03 Fiber-tipped stylus pack of 3
- Heavy duty and made from stainless steel/brass. No plastic parts real pen feel.
- Micro knit, hybrid mesh, fiber tip provides silent, smooth gliding use.
- Length of a stylus is 5″.
- Tether to a device or hand strap using SKU# SG TC5NGTC7NG TETHR 03.
Passive Stylus Tether
- SKU# SG TC5NGTC7NG TETHR 03
- Can be attached to tether points on device corners
- String type tether prevents loss of stylus.
Small Passive Stylus Kit With Tether
- SKU# SG TC7X STYLUS 03 Pack of 3
- Conductive Carbon filled plastic material w/ 5mm tip
- Length of stylus is 3.5″.
- Rigid plastic stylus is optimized for enterprise durability.
- Clip & tether point to reduce loss.
- Tether to the ET6X using the attachment points on the top right or top left sides of the tablet.
Straps and Stand
Kickstand with Hand Strap
- SKU# XBK ET6X KCKSTD 01
- Easy to use while walking
- Adjustable to hand-size
- Detents help lock the desired rotation angle
- Kickstand provides great ergonomics for reading and touchscreen interactions while the tablet is on flat surfaces
- User adjustable display angle
Replacement Hand Strap for Kickstand
- SKU# SG ET5X RHTP1 01
- Spare/Replacement hand strap
Carry Handle
- SKU# SG ET8X HANDLE1 01
- Comes with a Stylus Slot and Coiled Stylus Tether
- Requires Attachment Clips (SG ET6X DCLIPS 01)
Shoulder Strap
- SKU# SG ET8X SHLDR1 01
- Adjustable length
- Requires Attachment Clips (SG ET6X DCLIPS 01)
Attachment Clips for Straps
- SKU# SG ET6X DCLIPS 01
- Attach to keyboard latch points on the tablet
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>