Lamps4sale AV02 Axial Fan with Timer Instruction Manual
- June 1, 2024
- Lamps4sale
Table of Contents
Lamps4sale AV02 Axial Fan with Timer
Specifications
- Type: Axial fan with timer – Solight AV02
- Power supply: 230V/50Hz
- Power consumption: 13W
- Airflow: 120 m3/h
- Noise level: 40 dB
- Basic installation dimension A: 100mm
- Other dimensions: a=157mm, b=157mm, c=25mm, d=60mm, e=97mm
Product Usage Instructions
Installation
- Ensure the power supply is switched off before installation.
- Mount the panel onto the installation opening.
- Connect the wires according to the timer connection scheme (Green-yellow, Brown, Blue).
Timer Settings
- Lift the cover to access the timer settings.
- Use the trimmer to set the timer to 1, 5, 10, 15, or 20 minutes.
Usage
- Switch on the fan using the designated switch.
- A red light indicates that the fan is running.
- When turning off the fan, the light will switch off, but the fan will continue running based on the timer setting.
Dear customer, we would like to thank you for purchasing our product. To ensure that the product serves you safely and to your full satisfaction, please read and follow the following instructions. This will prevent incorrect use or damage to the product. Avoid non-professional treatment of equipment and always follow the general principles of using electrical appliances. The product is intended for use in the home or interior. Avoid contact with fluids. Keep the manual for future reference.
Basic information
The fan shall be installed by an expert, at a height of 2.3 m above the ground. The power cable needs to be connected according to the applicable standards. Do not place the fan in places with elevated temperatures. If the power cable is damaged, it must be professionally replaced. It is not intended for an environment with the possibility of flammable or explosive gases. For internal use only. IP20 degree of protection. Suitable for kitchens, shops, toilets, bathrooms, etc. The fan can be equipped with a Solight AV-K reversing flap.
Specifications
Type| Specification| Power
supply
| Power
consumption
| Airflow| Noise
level
| Basic installation
dimension A (mm)
| Other dimensions (mm)
---|---|---|---|---|---|---|---
mm| V/Hz| W| m3/h| dB| a| b| c|
d| e
AV02| 100| 230/50| 13| 120| 40| 100| 157| 157| 25| 60| 97
Timer
A red light is switched on when the fan is switched on. When the fan is turned
off, the light is turned off , but the timer keeps the fan running according
to the timer settings. Under the cover is a timer that can be set to 1, 5, 10,
15 and 20 min using a trimmer.
Timer connection scheme
Installation
- The product bears a CE declaration of conformity under applicable regulations.
- Can be requested from the manufacturer via : [email protected].
Manufacturer: Solight Holding, s.r.o., Na Brno 1972, Hradec Králové 500 06, Czech Republic.
FAQ
- Q: Can this fan be used in a bathroom?
- A: The product is intended for use in the home or interior. Avoid contact with fluids, so it is not recommended for use in areas with high moisture like bathrooms.
- Q: What should I do if the fan stops working?
- A: Check the power supply and connections. If the issue persists, contact our customer support for assistance.