OXMART 500KG 3 in 1 Electric Hoist with Remote Control Instruction Manual

OXMART 500KG 3 in 1 Electric Hoist with Remote Control

Product Information

• Specifications
  • Rated voltage: 110V
  • Power: 1500W
  • Lifting speed: 5M/min
  • Load capacity: 500kg
  • Wire rope: 6mm*7.6m
  • Traction Distance: 7.6m
  • Remote control battery: 1 * 12V/23A battery (Black: without battery)
  • Power cord length: 1m/3.28ft
  • Hook size: Top hook – 1.5cm, Below hook – 4cm
  • Colour: Blue

Product Usage Instructions

• Safety Precautions
  • Do not touch the wire rope during the operation of the product to avoid injury.
  • Handle hooks and wire ropes with special care to prevent accidents.
  • When installing and operating, use an external wire rope to enhance safety.
• Precautions for Product Usage
  • Thick Gloves:
  • Always wear thick leather gloves when operating the wire rope to protect your hands.
  • Hook Usage:
  • Ensure the hook lock is engaged and does not support heavy objects.
  • Load only in the middle of the hook, not on the top or hook lock.
  • Avoid using hooks with elongated or bent throat hook tips.
  • Prevent Equipment Damage:
  • Avoid towing other vehicles with this product to prevent exceeding load capacity.
  • Avoid towing while running under load.
  • Avoid exposing any part of the product to water or wet environments.
  • Store the product in a dry, clean, and protected environment when not in use.
• Operation Modes
  • The product has two operation modes:
  • Short Speed Mode: Manual operation suitable for short distances.
  • Full Speed Mode: Long-distance operation mode activated by long-pressing the start switch.
• How to Replace Carbon Brushes
  • Replacing Carbon Brushes:
  • One pair of carbon brushes includes two pieces that should be replaced simultaneously.
  • Remove the old carbon brush, replace it with a new one, and securely tighten the screws.
  • The replacement process is the same for both sides of the motor.

FAQs

• Q: Can I exceed the maximum load capacity of 500kg?
  • A: No, exceeding the load capacity can lead to equipment damage and potential hazards. Always adhere to the specified load limits.
• Q: Is it safe to operate the hoist without wearing gloves?
  • A: It is strongly recommended to wear thick leather gloves when operating the wire rope to protect your hands from potential injuries.

To help you understand the product, the specification has provided the product installation, operational guidelines and safety precautions. Please read the instructions carefully so that you may be familiar with the correct operation of the product and some general safety measures. For all the precautions and warning information about product installation and safety operation, please read carefully, so that the operation can be avoided, and preventive measures should be taken to protect the safety of yourself and others. Regular inspections and regular testing of equipment, carefully observing the safety rules, and you can avoid the occurrence of safety accidents. This specification indicates the potential dangers and important safety precautions that can help you and others to avoid personal injury. Danger and attention is a signal word used to identify danger levels. Note that the note is used to remind the operation of important information needed to pay attention to.

FEATURES

1. Multiple Control Methods: Three control methods, including wireless remote control, wire control, and manual control, provide you with a more comprehensive way of operation.
2. High loading capacity: The electric host can carry 500kg/1102lbs,5m/min (16.4ft/min), up to 7.6m (25ft). The heavy-dutywireropeswith galvanized hooks can rotate 360 degrees. Not easy to break.
3. Pure copper motor: This portable crane winch equipped with a 1500W full copper motor is more powerful and has an efficient dissipation effect.
4. Easy to carry: Portable Lifting Hoist only weighs 10kg / 22 lbs, much lighter than traditional ceiling-mounted or beam-mounted hoist. You can easily lift the crane by the side handle and place the compact body in the car trunk for transportation. The hook on the top makes it easy on any pole with sufficient weight and can be removed at any time only by hand
5. Widely used: The electric lift hoist is an ideal material handling tool for repairing factories, warehouses, construction sites, etc., for lifting or towing goods.

INTRODUCTION

1. There are two modes of operation.
2. SHORT SPEED MODE:

  * Manual, positive and negative start switch, suitable for short-distance operation.
2.  **FULL SPEED MODE:**
  * Long press the positive and negative start switch, suitable for long-distance operation.
  *  **WARM TIPS:** This product must not run in reverse within 0.5 seconds through a certain delay or inertial buffer, otherwise the circuit board will be damaged.

2. The crane must ensure that the limit button in the vertical direction can work. If the limit button in the horizontal direction does not work, because the limit plate does not touch the limit point, the lifting transition will easily damage the machine.

BASIC PARAMETERS

• Rated voltage: 110V
• Power: 1500W
• Lifting speed: 5M/min
• Load: 500kg
• Wire rope: 6mm*7.6m
• Traction Distance: 7.6m
• Remote control battery: 1 * 12V/23A battery (Black: without battery)
• Power cord length: 1m/3.28ft
• Hook size: The size of the top hook is 1.5cm， and the size of the below hook is 4cm
• Colour: Blue

HOW TO REPLACE

HOW TO REPLACE CARBON BRUSHES

1. Use a cross screwdriver to disassemble the housing, and then find the position of the motor. The carbon brush is here.
2. One pair of carbon brushes includes two, which need to be placed at one time.
3. Remove the carbon brush inside, replace it with a new one, and then retighten the screws.
4. The replacement of carbon brushes on both sides is the same.

SAFETY PRECAUTIONS

1. Do not touch the wire rope during the operation of the product, so as not to cut your hands.
2. Special care must be taken in the handling of hooks and wire ropes.
3. When installing and operating, use an external wire rope to avoid hurting your hands or fingers.
4. Do not use this tool for lifting or moving persons.
5. When installing or operating the product, it is strictly forbidden to stand on the platform under the product, and it is not allowed to be on the same platform as the weightlifting machine
6. The environment in which the product is used must not contain explosive or flammable substances.
7. Wear with eye protection.
8. Do a good job of insulation protection for wires and electrical terminals.

SAFE OPERATIONS

1. During the running-in period, it is not allowed to run at full load, so as not to damage the parts and reduce the service life of the product.
2. Before operating the product, please check whether the remote control is operating normally. The remote control should be placed in a clean and dry place to avoid damage to components.
3. Do not use a product that is malfunctioning, malfunctioning, or damaged.
4. The operation of the product must be checked before replacing the damaged parts of the wire rope, hook, and rope device.
5. The service life of the wire rope is closely related to its usage. Before using a new product on the wire rope and replacing it with a new wire rope, it must be evenly wound on the drum under the condition of load recovery, otherwise, the wire rope will be damaged due to improper winding.
6. Oil the steel wire rope regularly. When oiling, use a bristle brush or wood chip. It is strictly forbidden to oil the working rope directly by hand.
7. If the degree of fracture of the wire rope exceeds the specified requirements, the amount of wear should be replaced in time, and the model and specification of the replaced wire rope are the same as the original ones.
8. Do not use sharp hook wire rope to avoid damage.
9. Before using the product, eliminate any factors or obstacles that may affect the safe operation of the product.
10. Easy to operate, use proper rope technique to avoid slippage on the belt.
11. Do not touch the wire rope or hook when pulling or loading. Pay attention to the stability of the load during operation.
12. Do not shake or rotate the load.
13. Check the weight at any time.
14. Do not pull the wire rope beyond the length of the red paint, so as not to loosen the wire rope from the opposite direction.
15. When someone uses the remote control or the product to operate, do not touch the wire rope, keep the distance between the wire rope and the load, and avoid other people approaching.
16. During the operation, you should stand on the side of the product operation, and not stand under the person to prevent danger.
17. Make sure that the running direction of the hook is consistent with the direction of the operating switch.
18. When the product is not in use, maintained or replaced, the power cord should be unplugged in time.
19. Do not use this product to tow other vehicles.
20. The impact load can easily cause the instantaneous load capacity to exceed the load capacity of the wire rope or the product.
21. This product cannot be used for loads in stationary operation.
22. When hoisting or obliquely hoisting heavy objects, do not pull them obliquely to avoid danger.
23. When the product is not working, do not hang heavy objects in the air to prevent permanent deformation of the parts.

PRECAUTIONS

1. Failure to follow these instructions could result in injury to hands or fingers:
2. Thick leather gloves must be worn when operating the wire rope.
3. Don’t let the wire rope get out of your hands.
4. Be careful not to burn yourself as the product or rear end emits heat.
5. Use hooks:
6. Features a hook shackle.
7. Make sure the hook lock is engaged and not supporting heavy objects.
8. Do not load on the top of the hook of the lock, only in the middle of the hook.
9. Do not use hooks with elongated or bent throat hook tips.
10. Product or equipment damage:
11. Do not use this product to tow other vehicles. The impact load may easily cause the instantaneous load capacity to exceed the load capacity of the wire rope or the product.
12. Do not use this product for towing while running under load.
13. Do not put any part of the product into a water or wet environment during use.
14. Keep the product in a dry, clean and protected environment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>