OXMART 50T-150mm Hydraulic Cylinder Jack Instruction Manual

OXMART 50T-150mm Hydraulic Cylinder Jack

Product Information

Specifications

• Product Name: Hydraulic Cylinder Jack
• Capacity: 50T
• Stroke Length: 150mm

Product Usage Instructions

Method of Use

To operate the Hydraulic Cylinder Jack, follow these steps:

1. Ensure the jack is placed on a stable and level surface.
2. Position the jack under the load to be lifted.
3. Operate the hydraulic pump to raise the jack and lift the load.
4. Once the desired height is reached, secure the load in place.
5. To lower the load, slowly release the hydraulic pressure using the pump control.

Precautions

It is essential to observe the following precautions while using the Hydraulic Cylinder Jack:

• Do not exceed the specified weight capacity of 50T.
• Regularly inspect the jack for any signs of damage or wear.
• Keep the jack clean and free from debris to ensure smooth operation.
• Always use appropriate safety gear when operating the jack.

FAQ

Q: What should I do if something goes wrong with the cylinder jack?

A: Within one year of purchase, you can replace the cylinder jack for free. Additionally, we provide lifelong technical service for any issues that may arise.

Can this jack be used to jack up a car?

No, this jack is not suitable for cars. But it can be widely used in power, chemical, steel, bridges, shipbuilding, machinery, etc.

Can the jack retract automatically?

Yes, the cylinder jack CAN retract automatically. After use, you need to loosen the oil return valve of the hydraulic pump first, and then the jack can retract automatically.

What type of connector does this cylinder jack use?

The jack adopts a threaded ZG3/8

About after-sales service.

Within one year of purchase, if something goes wrong with the cylinder jack, you can replace it for free. And we provide lifelong technical service

METHOD OF USE

• STEP 1:
  • Open the dust cover and connect the male connector of other tools.
• STEP 2:
  • Connect the connectors tight to avoid leakage.
• STEP 3:
  • Loosen the vent nut switch to prevent the fuel tank from being sealed.
• STEP 4:
  • Tighten the pressure relief valve switch clockwise.
• STEP 5:
  • Press the handle to raise the piston of the cylinder.
• STEP 6:
  • Loosen the pressure relief valve switch counterclockwise.

Specifications

DETAILED DESCRIPTION

PRECAUTIONS

1. The load-bearing surface needs to be hard and flat.
2. Partial loading is strictly prohibited.
3. Stop immediately upon seeing the stop line.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>