HAMPTON BAY HD5887F Series Highler Floor Lamp User Guide

October 30, 2023
HAMPTON BAY

HAMPTON BAY - logo Item # 1008 433 486 / 1008 433 499 / 1008 433 511
Model # HD5887F3 / HD5887F4 / HD5887F5
USE AND CARE GUIDE
FLOOR LAMPHAMPTON BAY HD5887F Series Highler Floor
Lamp Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products  available for your home improvement needs. Thank you for choosing Hampton Bay!

Safety Information

READ AND SAVE THESE INSTRUCTIONS.

  • This product has been manufactured with the highest standards of safety and quality.
  • For energy savings, this portable luminaire has been engineered to safely use a self-ballasted LED bulb in place of an incandescent bulb.
  • Before assembling your portable luminaire, spread all parts out on a clean surface. Inspect each part for defects that may have occurred during shipping.

DANGER: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not continue the assembly process.
CAUTION: Consult a qualified electrician if you have any electrical questions. If you have any non-electrical questions about this fixture, please call our Customer Service Team at 1-855-HD-HAMPTON or visit HAMPTONBAY.COM.  Please reference the model and item numbers.

Warranty

THREE (3) YEAR WARRANTY
WHAT IS COVERED
The manufacturer warrants this fixture to be free from defects in materials and workmanship for a period of three (3) year from the date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product  has not been damaged through misuse, abuse, accident, modifications, alteration, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set up, or used in any way not in  accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to  faulty material or workmanship.
This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear.
WHAT IS NOT COVERED
The manufacturer does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability  and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.

Pre-assembly

PLANNING ASSEMBLY

  • Read all instructions before assembling.
  • To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard.

IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please call the Customer Service Team at 1-855- HD-HAMPTON.
NOTE: This product requires one 60W maximum medium base (E26) type “A” or type “S” or 9W maximum medium base (E26) self-ballasted LED vintage Edison bulb (sold separately).

PACKAGE CONTENTS

HAMPTON BAY HD5887F Series Highler Floor Lamp - Parts

Part Description Quantity
A Socket assembly 1
g Rod assembly 1
C Column 1 1
D Column 2 1
E Base 1
F Power cord 1
G Shade 1

Assembly

Attaching the column and socket assembly

  • Thread the columns 1 and 2 (C/D), the rod assembly (B), the socket assembly (A) and the base (E) together as shown.
    Hand-tighten until snug.

  • As you thread the columns (C/D) , the socket assembly (A) and the base (E) together, continuously pull the power cord (F) from the bottom of the base (E).

  • Adjust the arm of the socket assembly (A) to your desired location and secure the knurled nut (1). Hand-tighten until snug.
    HAMPTON BAY HD5887F Series Highler Floor Lamp -
Assembly

  • Attaching the shade and the light bulb

  • Unscrew the socket ring (3) and steel collar (2) from the socket of the socket assembly (A). Place the shade (C) and steel collar (2) over the socket and secure with the socket ring (3).

  • Install the correct bulb (not included) referring to fixture markings and/or labels for maximum wattage.

  • Plug the power cord (F) into the outlet, then turn on the switch and enjoy.
    NOTE: Uses one 60W maximum medium base (E26) type “S” or type “A” or 9W maximum medium base (E26) self-ballasted LED vintage Edison bulb (sold separately).

HAMPTON BAY HD5887F Series Highler Floor Lamp - Assembly
2

Care and Cleaning

  • Use a dry, soft cloth to dust or wipe carefully.
  • Do not clean with abrasive materials, bleach, or solvents.

Troubleshooting

Problem Possible Cause Solution
The light(s) will not turn on. The bulb is burned out. ❑ Replace the light

bulb.
The power is off.| ❑ Ensure the power supply is turned on.
The cord is not plugged in.| ❑ Ensure the cord is plugged into an outlet.
The circuit breaker is off.| ❑ Ensure the circuit breaker is set in the “ON” position.
The fuse blows, or the circuit breaker trips, when the light is turned on.| There is an exposed wire.| ❑ Discontinue use of the light.
Check the wire connections.
❑ Contact a qualified electrician or call the Customer Care Service Team at 1-855-HD-HAMPTON.

Service Parts

MODEL: HD5887F3 / HD5887F4 / HD5887F5

HAMPTON BAY HD5887F Series Highler Floor Lamp -
PACKAGE

Part Description Quantity
A Socket assembly 1
B Rod assembly 1
C Column 1 1
D Column 2 1
E Base 1
F Power cord 1
G Shade 1

Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

HAMPTON BAY User Manuals

Related Manuals