SEALEY SA141 Air Impact Wrench 1 4Sq Drive Diesel Glow Plug Kit Instruction Manual

SEALEY SA141 Air Impact Wrench 1 4Sq Drive Diesel Glow Plug Kit

Specifications

• Product: 1/4SQ DRIVE AIR IMPACT WRENCH DIESEL GLOW PLUG KIT
• Model No: SA141
• Recommended Air Pressure: 90psi
• Compliance: Machinery Directive 2006/42/EC

Product Information

Thank you for choosing a Sealey product. The 1/4SQ DRIVE AIR IMPACT WRENCH DIESEL GLOW PLUG KIT (Model No: SA141) is manufactured to high standards to provide you with reliable performance when used correctly and maintained properly.
Please read and follow all safety instructions and guidelines outlined in the user manual to ensure safe operation.

Product Usage Instructions

Safety Guidelines

• Follow all Health & Safety regulations and workshop rules when using the wrench.
• Always wear appropriate protective gear such as eye protection, gloves, ear defenders, and a mask.
• Keep the work area clear of non-essential persons and children.
• Do not use the wrench for tasks it is not designed for.
• Avoid using the wrench if damaged or faulty; contact your Service Agent for assistance.
• Operate the wrench only after receiving proper instruction from a qualified person.
• Do not carry the wrench by the air hose or operate it under the influence of alcohol or drugs.

Maintenance and Operation

• Disconnect the wrench from the air supply before changing accessories or servicing.
• Regularly inspect the wrench for any damaged or worn parts; replace with genuine parts only.
• Check air pressure to ensure it does not exceed the recommended 90psi.
• Keep the air hose away from heat, oil, and sharp edges; inspect for wear before each use.
• Use impact sockets specifically designed for use with an impact wrench.

Storage and Handling

• Store the wrench in a safe, dry, childproof location when not in use.
• Avoid carrying the wrench with your finger on the trigger to prevent unintentional starting.
• Avoid directing air from the hose at yourself or others.
• Avoid carrying the wrench by the air hose or yanking the hose from the air supply.

Frequently Asked Questions (FAQ)

Q: How should I store the impact wrench when not in use?

A: Store the wrench in a safe, dry, childproof location away from heat sources.

Q: What should I do if I suspect the wrench is damaged?

A: Do not use the wrench if damaged or faulty. Contact your Service Agent for assistance and inspection.

Q: Can I use any type of socket with this impact wrench?

A: Only use impact sockets that are specifically designed for use with an impact wrench to ensure safe operation.

Q: What is the recommended air pressure for operating this wrench?

A: We recommend maintaining an air pressure of 90psi for optimal performance.

• Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.
• IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
• USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
• FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SAFETY

• Follow all Health & Safety and general workshop rules, regulations, and conditions when using the wrench.
• WARNING! Disconnect from the air supply before changing accessories or servicing.
• Maintain the wrench in good condition and replace any damaged or worn parts. Use genuine parts only.
• Unauthorized parts may be dangerous and will invalidate the warranty.
• WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.
• Keep the air hose away from heat, oil, and sharp edges. Check the air hose for wear before each use and ensure that all connections are secure.
• Only use impact sockets which are specifically designed for use with an impact wrench.
• Wear approved safety eye/face shields, ear defenders, and hand protection.
• Maintain correct balance and footing. Ensure that the floor is not slippery and wear non-slip shoes.
• Keep children and non-essential persons away from the work area.
• DO NOT use the wrench for a task that it is not designed to perform.
• WARNING! DO NOT use a wrench if damaged or thought to be faulty (contact your Service Agent).
• DO NOT use a wrench unless you have been instructed in its use by a qualified person.
• DO NOT carry the wrench by the air hose, or yank the hose from the air supply.
• DO NOT operate the wrench if you are tired or under the influence of alcohol, drugs, or intoxicating medication.
• To avoid unintentional starting DO NOT carry the wrench with your finger on the trigger.
• DO NOT direct air from the air hose at yourself or others.
• When not in use, disconnect it from the air supply and store it in a safe, dry, childproof location.
• WARNING! – RISK OF HAND-ARM VIBRATION INJURY
• This tool may cause Hand Arm Vibration Syndrome if its use is not managed adequately.
• This tool is subject to the vibration testing section of the Machinery Directive 2006/42/EC.
• This tool is to be operated by these instructions.
• Measured vibration emission value (a): 5.1m/s²
• Uncertainty value (k): 1.0m/s²
• Please note that the application of the tool to a sole specialist task may produce a different average vibration emission.
• We recommend that a specific evaluation of the vibration emission is conducted before commencing with a specialist task.
• A health and safety assessment by the user (or employer) will need to be carried out to determine the suitable duration of use for each tool.
• NB: Stated Vibration Emission values are type-test values and are intended to be typical.
• Whilst in use, the actual value will vary considerably from and depend on many factors.
• Such factors include; the operator, the task, and the inserted tool or consumable.
• NB: ensure that the length of leader hoses is sufficient to allow unrestricted use, as this also helps to reduce vibration.
• The state of maintenance of the tool itself is also an important factor, a poorly maintained tool will also increase the risk of Hand Arm Vibration Syndrome.

HEALTH SURVEILLANCE

• We recommend a program of health surveillance to detect early symptoms of vibration injury so that management procedures can be modified accordingly.

PERSONAL PROTECTIVE EQUIPMENT

• We are not aware of any personal protective equipment (PPE) that provides protection against vibration injury that may result from the
• Uncontrolled use of this tool. We recommend a sufficient supply of clothing (including gloves) to enable the operator to remain warm and dry and maintain good blood circulation in fingers etc.
• Please note that the most effective protection is prevention, please refer to the Correct Use and Maintenance section in these instructions.
• Guidance relating to the management of hand-arm vibration can be found on the HSC website www.hse.gov.uk – Hand-Arm Vibration at Work.

INTRODUCTION

• A reduced torque impact wrench was suitable for the removal of seized glow plugs on diesel engines. Features a 4-position air regulator which provides limited torque settings to suit. One-handed operation for trigger and forward/reverse control.
• Soft grip reduces vibration, and chill effect and adds comfort. Handle exhaust helps to lower noise levels during use. Includes five deep impact sockets, an extension bar, and a universal joint. Supplied with foam insert and metal storage case.

SPECIFICATION

• Model No:……………………………………………………. SA141
• Air Consumption:……………………………………………… 5cfm
• Contents:……………………………………………………………….. 1/4” Sq Drive Deep Impact Sockets; 8, 9, 10, 11, 12mm 50mm Extension Bar, 1/4” Sq Drive Universal Joint
• Free Speed:……………………………………………..10000rpm
• Inlet Size…………………………………………………….1/4” BSP
• Noise Power/Pressure:………………………….. 102/91dB(A)
• Operating Pressure…………………………………………. 90psi
• Torque Settings……………………………….10, 20, 30, 40Nm
• Vibration/Uncertainty:………………………………. 5.1/1.0m/s²

AIR SUPPLY

• The recommended hook-up is shown in Fig 1.
• Ensure that the wrench trigger is in the “Off” position before connecting the air supply.
• You will require an air pressure of 90psi and an airflow of 5cfm.
• WARNING! Ensure that the air supply is clean and does not exceed 90psi. Too high an air pressure and/or unclean air will cause excessive wear and may result in damage and/or personal injury.
• Drain the compressor air tank daily. Water in the airline will damage the wrench.
• Clean compressor air inlet filter weekly.
• Line pressure should be increased to compensate for unusually long air hoses (over 8 meters). Hose internal diameter and the bores of fittings should be 1/4” minimum.
• Keep the hose away from heat, oil, and sharp edges. Before each use check hose for wear and make certain that all connections are secure.

OPERATION

• WARNING! Ensure that you read, understand, and apply safety instructions before use.
• Only use the impact sockets that are supplied with this tool or those specifically designed for use with an impact wrench. DO NOT use worn or damaged sockets.
• Connect the wrench to the air supply as described in Section 4.
• Place the socket over the top of the glow plug and depress the trigger to operate the wrench.
• To change rotation, push the slide button at the top of the handle. Move it in the direction F for forward (clockwise) and in the direction for reverse (anticlockwise) see Fig. 3.
• The torque may be regulated by adjusting the air regulator valve at the base of the handle.
• DO NOT allow the wrench to free run for an extended period as this may damage the bearings.

MAINTENANCE

• WARNING! Disconnect the wrench from the air supply before changing accessories, servicing, or performing maintenance. Replace or repair damaged parts. Use genuine parts only. Unauthorized parts may be dangerous and will invalidate the warranty.
• If the air supply system does not have an oiler, lubricate the wrench daily with a few drops of Sealey air tool oil dripped into the air inlet.
• Clean the wrench after use.
• Loss of power or erratic action may be due to the following:
• A) Excessive drain on the airline. Moisture or restriction in the air pipe. Incorrect size or type of hose connectors. To rectify this, check the air supply and follow the instructions in Section 4.
• B) Grit or gum deposits in the wrench will also reduce performance. If your model has an air strainer (located in the air inlet), remove the strainer and clean it. Flush the wrench out with gum solvent oil or an equal mixture of SAE 10 oil and paraffin.
• Allow to dry before use.
• When not in use, disconnect from the air supply, clean and store in a safe, dry, childproof location.

ENVIRONMENT PROTECTION

• Recycle unwanted materials instead of disposing of them as waste. All tools, accessories, and packaging should be sorted, taken to a recycling center, and disposed of in a manner that is compatible with the environment.
• When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.
• Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and parts without prior notice. Please note that other versions of this product are available.
• If you require documentation for alternative versions, please email or call our technical team on technical@sealey.co.uk or 01284 757505.
• Important: No Liability is accepted for incorrect use of this product.
• Warranty: The guarantee is 36 months from the purchase date, proof of which is required for any claim.
• Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 sales@sealey.co.uk www.sealey.co.uk

References

• HSE: Information about health and safety at work

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>