PHILIPS 945562990 100W White Ambiance Bulb User Manual

June 4, 2024
Philips

PHILIPS-logo

PHILIPS 945562990 100W White Ambiance Bulb

WARRANTY

power

PHILIPS-945562990-100W-White-Ambiance-Bulb-
fig-3

QR SCANNER

PHILIPS-945562990-100W-White-Ambiance-Bulb-
fig-4

FCC STATEMENT

please go to www.philtps-hue.com to leam more about Hue and how to use It This device complies With Part 15 of the FCC Rules and with RSS of Industry Canada Operation is subject to the following two conditions· (1) this devtce may not cause harmful Interference, and (2) this device must accept any Interference received, Including Interference that may cause undesired operation. The advanced Interface module complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with a minimum distance of 8″ or 20cm between the radiator and your body.

IMPORTANT NOTE accessories such as Hue Bndge, Hue Smart Button, Hue Smart Plug, Hue Dimmer Switch and Hue Motion Sensor· this Class B digital apparatus compiles With Canadian ICES-003.

IMPORTANT NOTE BULBS : This Class B digital apparatus complies With CAN ICES-005 (B) / NMB-005 (B). This digital apparatus does not exceed the class B Umtts for radio-notse emissions from digital apparatus as set out In the Radio Interference Regulations of the Canadian Department of Communications.

NOTICE: Changes or modifications made to this devtce not expressly approved by Signify North America Corporation (“Signify’) may void the US. FCC and Canadian authorization to operate this device.
This device has been tested and found to comply with the l1mtts for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference In a residential installation. This device generates, uses, and can radiate radio frequency energy and, If not installed and used in accordance With the 1nstruct1ons, may cause harmful interference to radio commun1cat1ons. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures·

  • Reortent or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver
  • If applicable, connect the equipment Into an outlet on a circuit different from that to which the receiver 1s connected
  • Consult the dealer or an experienced radio/television technician for help

LIMITED WARRANTY

S1gnify warrants that this device’s hardware components will be tree from defects in material and workmanship for a period of two (2) years from the date of purchase, unless a different period 1s stated In or on the packaging of the product, based on up to 3 hours average working time per day/7 days per week. when used as directed (the ·warranty Period”). Notwithstanding the foregoing, the Warranty Period for all Energy Star-certified products is three (3) years from the date of purchase. This limited warranty only applies to the hardware components contained in the original packaging. This limited warranty does not apply to any software. even if packaged or sold with the hardware components. S1gnlfy does not warrant that use of this device will be umnterrupted or error-free. If this deVice does not conform to thts Umlted warranty, Signify will send you. at its election. a replacement device or refund your original price upon receipt of the returned device, register receipt and proof of purchase. Please call our toll-free number. 1-800 ,555-0050, or wr1te to us (address Indicated on the packaglng) to find out how to return the devtce This limited warranty does not cover devices subject to accident, neglect, abuse, misuse or acts of God REPLACEMENT OR REFUND IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSELY EXCLUDED. Some states and provinces do not allow e><clusion of 1ncidental or consequential damages, so the above ltm1tat1on or exclusion may not apply to you. This Umited warranty gives you speofic legal rights, and you may also have other rights which vary from state to state and provtnce to province. This limited warranty Is subject to, and may be superseded by, our End of Support policy to the extent Sisnlfy decides to terminate support for this device tn accordance with its End of Support policy, available here: www .phillps-hue.com/endofsupportpol1cy

WARNINGS AND CAUTIONS

  • The product ls for Indoor use only. Do not use In a wet location, areas directly exposed to water or outdoors.
  • Keep away from liquids and humidity.
  • This product is not a toy designed to be played with by children.
  • Keep away from young children
  • Do not place on hot surfaces
  • Do not place on a thick rug or carpet
  • For safety reasons and under the terms of the warranty, none of the enclosed devices should be opened

Caution:
do not use this bulb (E26 base) in a 3 way lamp socket (E26d)

WARNINGS AND CAUTIONS FOR PRODUCTS USING BATTERIES:

Risk of explos1on If the battery ts replaced by an Incorrect type. Batteries should be installed by an adult. Different types of batteries and new and used batteries must not be mixed. Batteries are to be inserted with the correct polarity The supply terminals must not be short-ctrcutted. Exhausted battenes are to be removed from the product Do not use rechargeable batteries. Non- rechargeable batteries must not be charged.

Disposal of your old product

Manage in accordance with disposal laws m your area Remove the batteries when you discard the product. Do not throw the batteries away with normal household waste. They must be handed in at an official collect1on point or at a Philips Dealer, both of which will dispose of the batteries In an environmentally friendly way.

EXTRA WARNINGS AND CAUTIONS FOR PRODUCTS USING COIN/BUTTON BATTERIES:
CAUTION Do not ingest battery – Chemical burn hazard Keep new and used batteries away from children. If the coin/button cell battery 1s swallowed, it can cause severe internal burns 1n just two hours and can lead to death. It you think that batteries m1sht have been swallowed or placed Inside any part of the body, seek Immediate medical attention. If the battery compartment does not close securely, stop using the product and keep it away from children,

WIRELESS SPECIFICATIONS
for all PhiUps Hue products Wireless RF mode frequency band 2.400-2,483.5 MHz Operating channels Ztgbee if applicable: channels 11 – 26 Operating channels Btuetooth If applicable: channels 0-39 Maximum transmitted power <20 dBm

EXTRA WIRELESS SPECIFtCATIONS
for Hue Dimmer Switch, Hue Smart button, Hue Motion Sensor Range· 12 m Indoor Installing on or near metal surfaces may lead to reduced range,

ENVIRONMENTAL SPECIFICATIONS FOR ALL Philips Hue PRODUCTS

  • Temperature (operation); 32 … 104°F (0 … 40 °q
  • Temperature (storage): -40 … 176°F (-40 … 80 °q
  • Relative humidity (operation) 0-80%
  • Relative humidity (storage): 0-90%

EXTRA ENVIRONMENTAL SPECIFICATIONS for Hue Smart Plu1

  • Temperature (storage): -4 158°F (-20 … 70 ·q
  • Relative humidity: 5-95% non-condensing
  • Type 1 enclosure
  • Pollution degree 2
  • Operating Control Type 1.8 action
  • Standby power: < 0 .SW per device

EXTRA ENVIRONMENTAL SPECIFICATIONS for Hue Bulbs

  • Temperature (operation): -4 .. 113″F (-20. 45 ·q
  • Temperature (storage): -13 … 140″F (-25 … 60 ·q
  • Relative hum1d1ty· 5-95% non-condensing

ADDITIONAL PRODUCT SPECIFICATIONS for Hue Dimmer Swttch and Smart Button

  • Wall plate 1nstallat1on
  • Always switch off power prior to 1nstallat1on.
  • If in doubt, consult a qualified or licensed electrician.
  • Ensure the product Is always installed according to relevant regulations. Perchlorate Material-special handling may apply.

ADDITIONAL PRODUCT SPECIFICATIONS for Hue Smart Plu1

  • The equipment must be connected to a mains socket outlet with a protective earthing connection.
  • Before replacing, tum off power and unplug the appliance connected to the device.
  • Do not exceed the maximum load as Indicated on the product
  • The product is designed to sw1tch on and off light sources. We recommend not to connect other appliances to the plug
  • Do not connect any Hue lamp to the produc

Do not connect multiple devices one after the other.

CLEANING AND MAINTENANCE.

Do not clean the device when 1t 1s on and connected to the power supply. To avoid scratching the device, clean only w1th a soft dry cloth Do not use cleaning agents to clean the device. Manage in accordance w1th disposal laws fn your area. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Signify is under license. Other trademarks and trade names are those of their respective owners. Hue Personal Wireless Lighting is a trademark owned by Signify Holding BV. Phfllps and the Philips shield emblem are registered trademarks of Konlnklfjke Philips NV

CUSTOMER SUPPORT·

For more Information, please visit our webs1te at
www.philips-hue.com/support. or call our customer service
(1-800-555-0050)

Signify North Amenca Corporation
200 Franklin Square Drive
Somerset. NJ 08873. USA

Signify Canada Ltd/Signify Canada Ltee 281 Hillmount Road, Markham, ON, Canada L6C 2S3 Questions or Comments/
Questions ou commentaires
1-800-555-0050

© 2021 Signify Holding
All rights reserved

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals