DORMAN 929-301 Rear Leaf Spring Instruction Manual
- June 1, 2024
- DORMAN
Table of Contents
DORMAN 929-301 Rear Leaf Spring
Specifications
- Product Name: Leaf Spring Measurement Tool
- Function: Assist in obtaining accurate measurements of leaf springs
- Compatibility: Suitable for multiple vehicle applications with various leaf spring options
Before You Begin
Before using the Leaf Spring Measurement Tool, ensure you follow these steps:
- For accurate measurements, it is recommended to seek the assistance of a qualified technician.
- Ensure the spring is relaxed and off the vehicle before taking measurements.
Measurement Procedure
- Identify the specific leaf spring configuration using the illustrations provided.
- Measure the following parameters using the tool:
- Length A: Measure along the leaf surface on the short side (inches/cm).
- Length B: Measure along the leaf surface on the long side (inches/cm).
- Arch: Measure the arch of the leaf spring (inches/cm).
- Pack Thickness: Measure the thickness of the leaf spring pack (inches/cm).
- Record the measurements accurately for reference during installation or replacement.
FAQ (Frequently Asked Questions)
Q: Can I use this tool on any vehicle?
A: The Leaf Spring Measurement Tool is designed to work with various
vehicle applications with multiple leaf spring options. Ensure compatibility
before use.
TECH NOTE: MEASUREMENTS LEAF SPRING
BEFORE YOU BEGIN
- Always wear proper safety equipment when performing repairs.
- Ensure this part fits your exact vehicle year, make, model and configuration. You can verify at your point of purchase using the part number on the box, or using the part number above at DormanProducts.com
- Reference the appropriate service manual for your vehicle. If you do not have a service manual, and do not have the training or experience to perform the necessary procedures correctly, seek the services of a qualified technician.
Some vehicle applications have multiple leaf spring options. Use the following illustrations to help obtain accurate measurements. Take spring measurements on relaxed spring off the vehicle.
Slipper Style Spring
KEY
- A. Length A (in) Short Side Measure along leaf surface
- B. Length B (in) Long Side Measure along leaf surface
- C. Arch (in)
- D. Pack Thickness (in)
Disclaimer: Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a qualified auto technician before attempting to perform any work you are not qualified to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Traffic Safety Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
Dorman Products, Inc. | Corporate Office and Customer Service: 1-800-523-2492 | Tech Line: 1-866-933-2911 ©2022 No reproduction in whole or in part without prior written approval.