DULCET DC-D9000X Car Player User Manual

DULCET DC-D9000X Car Player

Product Information

Specifications

• Model: DC-D9000X
• Type: Car Player
• Features: Bluetooth, Dual USB, AUX Input, SD Card, FM Radio

Product Usage Instructions

Device Layout
The device layout consists of front and back components:

• Front:
  • Front L (RED)
  • Front R (RED)
  • Power Interface
• Back:
  • Radio Antenna Rear R (WHITE)
  • Rear L (WHITE)
  • Speaker Connection
  • Fuse

Bluetooth Operation

1. Ensure the device is powered on. Bluetooth will be in the background and can be discovered and paired by other devices. The Bluetooth name is DULCET.
2. Press the MODE button to switch to Bluetooth mode (BT). Use the buttons to control music playback from your mobile device.
3. Press MODE button to switch back to other modes, causing the music from your mobile to pause but continue running in the background.
4. If a call is received while connected via Bluetooth, the device will automatically switch to BT mode, display the caller’s number, and allow you to answer or hang up the call.

Installation Instructions

1. Ensure proper placement of the unit and refer to the wiring diagram for correct connections.
2. Test the unit to ensure it is working correctly before proceeding.
3. Wrap connection lines with insulation tape after testing for secure wiring.
4. Fit the car stereo into the slot for installation completion.

FAQ

• Q: What should I do if the device gets wet?
  A: Do not get the device wet while washing the car to prevent short circuits, fires, or device failures.

• Q: How can I contact support for further assistance?
  A: You can reach out to us via WhatsApp or call us at +91-8882-630-630 from 10 am to 6 pm Monday to Saturday for assistance.

DC-D9000X
Car Player

Device Layout

Please Check the Speaker line carefully before installation. If any grounding or touching, please recheck the connect on again or it can cause short circuit, fire or some other device failure.

Wiring Diagram

Bluetooth Opera on

1. When it is in the state of power on, Bluetooth had already launched in the background and it can be discovered and pair bluetooth by other device. The bluetooth named “DULCET” Press MODE Button, it will change to bluetooth
   mode (shown as “BT”). If it is not in the state of connect ng bluetooth, “BT”
   will be blank. Instead it will be normally on.

2. After connect ng with bluetooth and change the mode to “BT”, you can play your mobile music and video. Button can control the PREV and NEXT song of your mobile phon. Besides, “ PLAY” means PLAY/PAUSE of your mobile.

3. In the state of connect ng with mobile bluetooth, press “MODE” button, then it will change to other mode and automatically pause the song from your mobile, but s ll run in the background.

4. If it is  connect ng with the bluetooth, in the state of ant mode
   (Mp3/FM/LINE/BT), if someone call you up, it will stop the current mode and change to BT mode automatically and the display screen will shown the phone number who called you up. Then press   button to hang up and press for answering the  phone….After hanging up, it will come back to formal mode.

Product Guidelines

In order to prevent injuries, fires or short circuit, Please pay after on to the following instructions:-

1. In order to prevent short circuit, o not drop metal objects on the device.
2. If there is smoke or any peculiar smell from the device, please turn off the device immediately.
3. Please make sure that the device doesn’t fall or collied strongly with any other object o prevent device failure.
4. Please do not install the device in the place of strong sunlight. high temprature, high humidiy or dust.
5. Please replace the fuse with the fuse of same specifica on. If you are using different specifica on of the fuse it may cause failure of the device.
6. In order to prevent short circuit, please pull out the power wire while replacing the fuse.
7. In order to deal with road and traffic condi ons promptly, please lower down the volume when driving.
8. Please do not get the device wet while washing car. This may cause short circuit, fire or some other device failure.

Installation Instructions

To install the device properly kindly refer to the following:-

1. Please make sure the unit is properly placed, connect the unit referring to the wiring diagram in the manual and test whether it is working properly or not.
2. Please wrapped the connect on line with insulin tape to ensure proper wiring after the test is completed.
3. Once all the wires are taped properly kindly fit the car stereo in the slot and you will be done with the installing of the stereo

For any other doubts or query please feel free to reach out to us via WhatsApp or call us at    +91-8882-630-630 from 10 am to 6 pm Monday to Saturday and we will do the best that we can to assist you.

• www.MyDulcet.com
• +91-8882-630-630

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>