DULCET DC-A-4009 Single Din Car Media Player User Manual

June 1, 2024
DULCET

DULCET DC-A-4009 Single Din Car Media Player

DULCET-DC-A-4009-Single-Din-Car-Media-Player-product

Specifications

  • Model: DC-A-4009
  • Type: Single Din Car Media Player
  • Features: Bluetooth, USB Input, SD Card, AUX Input, FM Radio
  • Front Functions: Volume Control, Pause/Play/FM Radio LED Display, USB Input Scanning, Bass Control, Rewind/Long, SD Card Input, Mode Selection, Treble Control, Forward/Long, Power ON/OFF, AUX Input
  • Additional Features: 2 RCA Output, Heatsink Holes for Cooling, FM Radio Antenna

Installation Instructions

  1. Ensure the unit is properly placed in the car dashboard.
  2. Refer to the wiring diagram in the manual to connect the unit correctly.
  3. Test whether the unit is working properly after connection.
  4. Wrap the connection lines with insulation tape for proper wiring.
  5. Once all wires are taped properly, fit the car stereo into the slot securely.

Safety Guidelines

To prevent injuries, fires, or short circuits:

  • Avoid getting the device wet while washing the car to prevent short circuits or device failure.

FAQs (Frequently Asked Questions):
Q: What should I do if the device gets wet?
A: If the device gets wet, immediately disconnect it from power and allow it to dry completely before attempting to use it again. Contact customer support if issues persist.

User Manual

DC-A-4009
Single Din Car Media Player

DULCET-DC-A-4009-Single-Din-Car-Media-Player-product
\(2\)

Car Stereo Front Func ons

DULCET-DC-A-4009-Single-Din-Car-Media-Player-\(3\)

Car Stereo Front Func ons

DULCET-DC-A-4009-Single-Din-Car-Media-Player-\(4\)

Please check the speaker line carefully before installation. If any grounding or touching, please recheck the connection again or it can cause short circuit, fire or some other device failure.

Car Stereo Func ons

  1. POWER ON/OFF: Press the Power button to Switch ON/OFF the Car Stereo.
  2. VOLUME CONTROL: Rotate the knob Right to Increase the volume and Rotate the knob to decrease the volume.
  3. USB INPUT: Plug in the Pendrive or USB to play songs via USB Input.(USB Input also Supports Phone Charging)
  4. LED DISPLAY: Shows the Radio Sta on/Channel or the mode selected.
  5. PAUSE/PLAY/SCAN: Press the button to Pause/Play the songs. Long Press the button to Scan the FM Radio Channels.
  6. BASS CONTROL: Rotate the Knob Right to Increase the Bass and turn the knob Le to Decrease the Bass.
  7. TREBLE CONTROL: Rotate the Knob Right to Increase the Treble and turn the knob Le to Decrease the Treble.
  8. MODE SELECTION: Press the Buon to Select the Mode to BLUETOOTH/FM RADIO/SD CARD/USB/AUX.
  9.  FORWARD/VOLUME UP: Press the Forward button to Play the Next song or change the sta on. Long Press to Increase Volume.
  10.  REWIND/VOLUME DOWN: Press the Rewind button to Play the Previous song or change the sta on. Long Press to Decrease Volume.
  11.  AUX INPUT: Supports 3.5 mm AUX Input to Play songs via AUX Cable.
  12. SD CARD INPUT: Supports SD/TF Card to Play Music via SD Card

Remote Control Functions

DULCET-DC-A-4009-Single-Din-Car-Media-Player-\(1\)

Product Guidelines

In order to prevent injuries, fires or short circuits, Please pay aen on to the following instructions:-

  1. In order to prevent short circuits, do not drop metal objects on the device.
  2. If there is smoke or any peculiar smell from the device, please turn off the device immediately.
  3. Please make sure that the device doesn’t fall or collide strongly with any other object to prevent device failure.
  4. Please do not install the device in a place of strong sunlight. high temperature, high humidity or dust.
  5. Please replace the fuse with the fuse of the same specifica on. If you are using different specifica on of the fuse it may cause failure of the device.
  6. In order to prevent a short circuit, please pull out the power wire while replacing the fuse.
  7.  In order to deal with road and traffic conditions promptly, please lower the volume when driving.
  8. Please do not get the device wet while washing the car. This may cause short circuits, fire or some other device failure.

Installa on Instruc ons

To install the device properly kindly refer to the following:

  1. Please make sure the unit is properly placed, connect the unit referring to the wiring diagram in the manual, and test whether it is working properly or not.
  2. Please wrap the connection online with the insula on tape to ensure proper wiring the test is completed.
  3.  Once all the wires are taped properly kindly put the car stereo in the slot and you will be done with the install on of the stereo

For any other doubts or queries please feel free to reach out to us via WhatsApp or call us at +91-8882-630-630 from 10 am to 6 pm Monday to Saturday and we will do the best that we can to assist you.

www.DulcetElectronics.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals