Phaesun 400_12 Wind Generator Stormy Wings User Manual
- June 1, 2024
- Phaesun
Table of Contents
Phaesun 400_12 Wind Generator Stormy Wings
Specifications
Model| Nominal Power| Max. Power| Nominal Voltage| Nominal Rotation| Startup
Wind Speed| Swept Area| Generator Type| Temperature| Brake Mode| Weight
---|---|---|---|---|---|---|---|---|---|---
Stormy Wings 400| 400W| 500W| 12 | 24 | 48 VDC| 750rpm| 2.0m/s – 12m/s| 1.55m|
| | | 22kg
Stormy Wings 600| 600W| 750W| 24 | 48 VDC| 750rpm| 2.5m/s – 12m/s| 1.75m| | |
| 25kg
Stormy Wings 1000| 1000W| 1200W| 24 | 48 VDC| 750rpm| 2.5m/s – 12m/s| 1.96m| |
| | 28kg
Product Usage Instructions
2. Wind Turbine Assembly:
2.3 Mast Installation:
To install the mast, follow these steps: – Secure the mast clamp to the generator flange using hex screws and nuts, tightening to 37 Nm. – Place the generator’s shaft into the upper part of the mast clamp. – Thread the cable through the mast and slide the mast into the lower part of the mast clamp.
2.4 Mounting of Hub Disc:
To mount the hub disc: – Attach the hub disc and fastening material. – Tighten the nut to 154 Nm. – Snap the cover onto the hub disc and ensure all ends are securely in place without any obstruction.
3. Mast Installation:
3.1 Site Selection:
To choose the installation site: – Ensure a location with appropriate dimensions for the mast and flange.
4. Selection of Conductor Cross-Section:
To determine the conductor cross-section: – Consider the distance between the generator and the regulator. – Refer to the table for recommended conductor sizes based on distance.
5. Troubleshooting:
5.1 Troubleshooting:
If abnormal vibrations occur: – Immediately stop generator operation to prevent damage.
Frequently Asked Questions
- Q: What should I do if there is no power output or low solar voltage?
- A: Check the system connections and ensure proper installation according to the manual. Verify voltage input and troubleshoot any potential issues.
“`
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>