Phaesun Sun Trickle Solar Light Instructions
- June 5, 2024
- Phaesun
Table of Contents
Content:
- Solar module with charge controller
- Suction cups
- Cable for car 12V socket
- Battery cable with ring cable lug
- Battery cable with crocodile clips
| Modul | 12W |
|---|---|
| Vmp | 19,8 V |
| Imp | 0,61 A |
| Voc | 23,1 V |
| lsc | 0,64 A |
| Controller | 18W | |
|---|---|---|
| system voltage | System-spannung | 12 VDC |
| end of charge voltage | Ladeendspannung | 14,4V |
| own consumption | Eigenverbrauch | < 2 mA |
- If the car 12V socket is switched off with the ignition, a battery cable must be connected directly to the battery
- Connect the cable to the 12V car socket
Provisional connection with crocodile clips must be removed before driving
A permanent connection with the ring terminal to the vehicle battery must be installed by a specialist
Warning:
- Do not attach the module to the windscreen while driving so that the view is not restricted
- Protect the charge controller from moisture
- Protect Sun Trickle from fire
- Prevent contact with acids, alcohol, fuels, oils, and greases
- In the event of abnormal behavior, disconnect the battery immediately and cover the module
- Do not dispose of the household waste
- Clean only with a damp cloth
Installation:
- Attach suction cups to the module and attach them to the windscreen or place them on the dashboard
- Have the connection to the battery terminals installed by a specialist
- The charge controller prevents overcharging and displays battery voltage
- LED functions are described on the back of the module
- Shaded modules cannot charge the battery
- Tinted windows reduce module performance and thus charge
- The module is used to maintain charge and not to fully charge the battery
- Bridge greater distance with SAE extension cable (Art. No. 391696)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>