FELLOW MEET TALLY PRO Precision Scale User Guide

: June 1, 2024
: Fellow

FELLOW MEET TALLY PRO Precision Scale 1

MEET TALLY™

PRO

A get-to-know-you guide

FELLOW MEET TALLY PRO Precision Scale

Brewing the perfect cup of coffee requires patience, attention to detail…
oh yeah and some math and memorization to get the ratios right.
Lucky for you, Tally Pro makes all this easy.
No more freestyling or eyeballing.

I graduated with a degree in coffee math.

COUNT ON IT

With Tally Pro you can:

| Control exactly how many coffee beans to the 0.1 gram.
---|---
| Calculate the amount of coffee to water at the touch of a single button.
| Automatically start a timer to make sure you don’t brew too fast or too slow.

BEFORE YOU GET STARTED

Tally is packaged with protective shims underneath the weigh pan, which should be removed before use, but do NOT dispose of them. The shims are essential if you plan on transporting Tally because they protect the load cell from damage. To safely remove the shims, follow the directions on Page 9 of your Safety Manual for how to remove and reinstall the weigh pan.

2-YEAR LIMITED WARRANTY
Register your scale to receive an additional year of coverage.*
register.fellowproducts.com

*Available on electric products sold to US customers only.

FELLOW MEET TALLY PRO Precision Scale - c1

ALL THE RIGHT PARTS

(A) DIAL| A multi-purpose wonder. Short press to power on and tare. Long press to power off. Turn to select ratios and switch between measurement units.
---|---
(B) MODE BUTTON| Press to switch between modes:
Brew Assist, Timer, and Weight.
(C) TIMER BUTTON| Short press to start or pause timer, long press to reset it. Plus, lock in your ratio during Brew Assist with a short press.
(D) WEIGH PAN| Perfectly sized for your brewer.
Removable for easy cleaning.
(E) DISPLAY| Nice and easy on the eyes.
Bright and very wipeable.
(F) USB-C CHARGING PORT| Cable included. Battery will remind you when it’s time to charge.

QUICK START GUIDE

When you just can’t weight

(1)| Put your empty container on the weigh pan and press the dial to turn on Tally Pro.
---|---
(2)| Press the mode button to toggle between the three modes, selecting Brew Assist.™
(3)| Turn the dial to select your preferred brew ratio to automatically calculate the water weight.
(4)| Add to the container until it reaches your desired weight.

RATIO RECOMMENDATIONS

Coffee dosage guide

20 grams: Pour-over for one
40 grams: Pour-overs for two
60 grams: French press for three

Coffee-to-water

1:2.5 → Fellow Prismo AeroPress® Attachment
1:8 → Cold brew
1:14 → French press
1:15 → AeroPress®
1:16 → Pour-over
1:17 → Coffee maker

BREWING IN BREW ASSIST™ MODE

Get the coffee-to-water ratio right every time.

(1)| After following steps 1-4 in Quick Start with Brew Assist, press the timer button to move to the next step.
---|---
(2)| Check out the display. Your saved target water weight in grams is on the right. The current water weight in grams is in the center (it starts at zero until you pour). The timer is on the left (it starts at zero, too).
(3)| Start pouring and Tally will start timing! Pour until the center (current) and right (target) weights are the same. The center oval will change from black to white to let you know your perfect brew is ready.

Tips

If you prefer a countdown, you can press the timer button before pouring. You can pause the timer any time by pressing it again while timing.
Press the dial at any time to tare the scale. This will not erase your water target if already set.
To start another brew, press and hold the timer button until the scale resets.
Scan here for a video walk-through of how to use Brew Assist.™

TIMER MODE

Got your ratio memorized? Tally will keep you in time.

(1)

Press the dial to turn on Tally Pro.

| (2)

Press the mode button to toggle between the three modes, selecting Timer.

| (3)

Put your empty container on the weigh pan and pour your ground beans into your brewer. Press the dial to tare.

---|---|---
(4)

Press the timer button to start the timer.

| (5)

Pour until you reach your desired water weight.

|

WEIGHT MODE

In the mood to cook or bake? Right this weigh…

(1)

To skip the tare step, start with your empty container on the weigh pan, and press the dial to turn on Tally Pro.

| (2)

Press the mode button to toggle between the three modes, selecting Weight.

| (3)

Turn the dial to select grams, ounces, pounds, or milliliters.

---|---|---
(4)

Pour ingredients into the container till you reach the desired weight.

| I moonlight as a sous-chef.

SMART TIPS + TRICKS

FELLOW MEET TALLY PRO Precision Scale 2

(1)

Tally Pro will automatically turn off after 10 minutes unless timing. Screen will dim after two minutes of inactivity.

| (2)

To turn off Tally Pro manually, press and hold the dial for one second. Tally will fade to black.

---|---
(3)

Set a reminder to charge Tally Pro every month for daily use. Tally Pro will remind you to charge it when its battery is getting low. Otherwise, you can check the battery status by plugging or unplugging the USB-C cable.

(4)

Keep coffee grinds away from the dial.

| (5)

FELLOW MEET TALLY PRO Precision Scale - f5