COMMSCOPE ATSBT-TOP-FM-5G Top Smart Bias Tee Owner’s Manual
- June 1, 2024
- CommScope
Table of Contents
COMMSCOPE ATSBT-TOP-FM-5G Top Smart Bias Tee
Specifications
- Product Type: Top Smart Bias Tee
- Frequency Range: 600-4200 MHz
- AISG Input Connector: Weatherproof AISG connectors
- BTS Interface: 4.3-10 female connector
- Antenna Interface: 4.3-10 male connector
- Operating Voltage: 10-30 Vdc
- Compliance: AISG 1.1 and 2.0 compliant
Product Usage Instructions
Installation
- Ensure the bias tee is grounded properly using the grounding lug.
- Connect the AISG input connector to the corresponding port on your equipment.
- Connect the BTS interface to the female connector and the antenna interface to the male connector.
Powering Up
- Apply a power supply within the specified voltage range (10-30 Vdc).
- Check for proper power indicator lights to ensure the bias tee is receiving power.
FAQ
- Q: What is the lightning surge capability of the bias tee?
- A: The bias tee has enhanced lightning protection and a grounding stud for additional surge protection. It can withstand lightning surges based on the provided specifications.
- Q: Is the bias tee compliant with regulatory standards?
- A: Yes, the bias tee is compliant with CE, CHINA-ROHS, UK-ROHS, and ISO 9001:2015 standards ensuring quality and safety.
Top Smart Bias Tee 600-4200 MHz
- Reduces cable and site lease costs by eliminating the need for AISG home run cables
- Weatherproof AISG connectors
- Intuitive schematics simplify and ensure proper installation
- Enhanced lightning protection plus grounding stud for additional surge protection
- 4.3-10 female connectors (BTS)
- 4.3-10 male connector (ANT)
- Operates at 10-30 Vdc
- AISG 1.1 and 2.0 compliant
Product Classification
- Product Type : RET bias tee
General Specifications
-
AISG Input Connector: 8-pin DIN Female
-
Antenna Interface: 4.3-10 Male
Antenna Interface Signal: RF | dc Blocked -
BTS Interface: 4.3-10 Female
-
BTS Interface Signal: AISG data | RF | dc
-
Color: Silver
-
EU Certification: CE
-
Grounding Lug Thread Size: M6
-
Smart Bias Tee Type: 10–30 V Top
Dimensions
- Height: 68 mm | 2.677 in
- Width: 98 mm | 3.858 in
- Depth: 60 mm | 2.362 in
Electrical Specifications
- 3rd Order IMD -161 dBc
- 3rd Order IMD Test Method Two +43 dBm CW Tones
- Insertion Loss, typical 0.1 dB
- Electromagnetic Compatibility (EMC) CFR 47 Part 15, Subpart B, Class B | EN 55022, Class B | ICES-003 Issue 4 CAN /CSA-CEI/IEC CISPR 22:02
- Impedance 50 ohm
- Interface Protocol Signal Data | dc
- Lightning Surge Capability 5 times @ -3 kA | 5 times @ 3 kA
- Lightning Surge Capability Test Method IEC 61000-4-5, Level X
- Lightning Surge Capability Waveform 1.2/50 voltage and 8/20 current combination waveform
- Operating Frequency Band 600 – 4200 MHz
- Power Consumption, maximum 0.6 W
- Protocol AISG 1.1 | AISG 2.0
- RF Power, maximum 500 W (CW Tone)
- Voltage Range 10–30 Vdc
- VSWR | Return Loss 1.09:1 | 27 dB, typical
Interface Port Drawing
Environmental Specifications
- Operating Temperature: -40 °C to +70 °C (-40 °F to +158 °F)
- Ingress Protection Test Method: IEC 60529:2001, IP67
Packaging and Weights
- Weight, net: 0.9 kg | 1.984 lb
Regulatory Compliance/Certifications
Agency Classification
- CE Compliant with the relevant CE product directives
- CHINA-ROHS Above maximum concentration value
- ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
- ROHS Compliant/Exempted
- UK-ROHS Compliant/Exempted
©2023 CommScope, Inc. All rights reserved. CommScope and the CommScope logo are registered trademarks of CommScope and/or its affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks. All product names, trademarks and registered trademarks are property of their respective owners. Revised: December 7, 2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>