HEYVALUE N2T Baby Bottle Warmer User Manual

HEYVALUE N2T Baby Bottle Warmer

HEARTFELT THANK YOU

• Thank you so much for purchasing from us and placing your trust in our brand.
• Heyvalue – designed with everyday value
• Heyvalue committed to creating modern and thoughtful baby products. We are always passionate and devoted to making the ideal products show care and love. Choose HEYVALUE, and enjoy your parenthood.

For any questions or issues, please email us:Support@heyvaluestore.com

Or SMS HEYVALUE to (833)524-0498 We will go above and beyond to resolve any customer issue within 24 hours.

Best Regards,

Jessie

Founder of HEYVALUE

SPECIFICATIONS

• Product Name: Bottle Warmer
• Warranty: 12 Months
• Product Model: N2T
• US Version: 120V- 60Hz
• Rate Power: 400W
• Recommended Temperature: 15-30 “C
• Recommended Humidity: 50~80%
• Package: 1pc
• Recommended Environment: Indoor
• Product Capacity: 200ml

Instruction

Note: Don’t touch the device while it’s working to prevent bums.

Warning

• Please check all parts of this bottle warmer to ensure safety and cleanliness before using.
• Put the bottle warmer on a horizontal place.
• Make sure that the bottle warmer has been filled with an appropriate amount of distilled water to avoid dry burning before plug-in.(Bottle should not be floating after adding waler).
• After you plug in the power, the bottle warmer will “beep” prompts that the power is connected.
• Press the power button, Power light is on.
• Before connecting the power supply, make sure that the supply voltage is the same as the required voltage for the bottle warmer.
• A transformer is needed for different voltage

Explanation of settings

• ON/OFF: Press this button to turn on the appliance and the light is on. Press again lo tum off and the light is off.

Choose Function: The appliance has 5 functions:

• FAST: (add 4Cml distif/&d wat&r into warming chembel’) Select this function to warm milk or water quickly in 2·6 minutes. The device will switch to 24H constant warming mode autometieally when timer run out. Screen shows target mllk tampar.ature end remaining warming lime.

  • Take the bottle out lmmedlate!y after timer run out to avoid ovemeating. If you ovemeat breast milk, valuable nutrient$ end vitamins may lost.
  • Remember to put lid on while use this function.

• 24H: (edd distilled water to MAX into w11rming ch11mb$1) Select this function to keep warm milk slowly and keep in certain temperature for up to 24 hours.Screen shows real time WATER temp (not milk/food) temp and remaining healing time.

• THAW: (add dlstllleel water to MAX Into warming chamb&I’) Select this function to defrost frozen milk slowly. Screen shows real time WATER temp (not milk/food) temp and remaining heating time.

• FOOD: (add dlstllled water to MAX Into warming chamb&I’) Select this function to heat baby food and keep it in certain temperature for up to 24 hours. Screen shows real time WATER temp (not milk/food) temp and remaining heating ti me.
  STERILIZE: (add 10(M50ml distilled water into warming chamber) Select this function to sterilize baby bottles or pacifiers. Screen shows real time WATER temp and remaining sterlllze time.

• Restore Factory Settings: In standby mode(Power butlon flashes breathing light), press and hold the ” + • button for about 2 seconds until devtce emit a ‘beep” sound. The product will be restored to factory settings.

Below operation diagram is for” FAST/ 24H /THAW/ FOOD” only, For “ • function, please refer to detail explanation as followed.

1. This botUe warmer has smart memory function, it will remember last time setting to save your trouble to set again for next time using.
2. If water dry out, the product will shut down to prevent dry burning (you can not turn on the bottle warmer by press the power button at this time). Wait 10 minutes or add 6 OZ room temperature water into the chamber and wait for 3 minute5 to cool down the milk warmer, then press the power button to restart.

FAST – Fast Warming

1. Pour 40ml distilled water into the bottle warmer (It is recommended to use distilled water to prevent scaling)

2. Place the bottle and lift-out basket into the bottle warmer.

3. Press the power button, then choose• FAST” function button. The “FAST ” icon will start flashing . Screen shows default target milk temperature 37t/98.6 ‘F and default heating time 3 minutes flashing. You can adjust time while timer is flashing according to reference chart as followed.
   The bottle warmer will start working after the time indicator flashes twice. The “FAST” indicator light keeps flashing and timer indicator is counting down while this function is working.
   Note: The adjustable range of time is 1-10 minutes.

4. The bottle warmer will beep 5 limes at the end of countdown. It will automatically switch to the “24H” mode, the default 24H setting is 37°C/98.6° F, 24 hours. The ·FAST” indicator light returns to steady on, while the “24H” indicator light begin flashing.

5. Before feeding, gently shake the bottle and check the temperature of the milk by sprinkling a few drops on the inside of your wrist.

Notice:

1. The temperature of the • FAST” function is not adjustable, this setting helps to warm milk to “37°C/98.6°F” by steam, screen shows the target final milk temp.
2. Screen shows real-time WATER temp in 24H setting, don’t worry if screen shows high temp at this time, it’s not equal to milk tern perature. Higher temp water is for warming faster in FAST setting. The water tern perature will decrease and stabilize at body temperature in 24H mode for keeping milk warm 24 hours.
3. After the product starts working, the corresponding function indicator keeps flashing.
4. The speed of warming milk depends on the milk volume, it’s initial temperature, i.e. room temperature or fridge temperature.
   • When you find the milk is not warm enough, you can place the bottle back into the appliance for a maximum of 0.5-1 minutes of extra warming. This will create a slightly warmer result but without overheating.
   • If you leave the bottle in the bottle warmer longer than the lime indicated in the setting table, the milk may become overheated.
5. lf water dry out, the product will shut down due to high temperature detected (you can not turn on the bottle warmer by press the power button at this time). Wait 10 minutes or add 6 OZ room temperature water Into the chamber and wait for 3 minutes to cool down the milk warmer, then press the power button to restart.
   Caution: The water in the bottle warmer might be hot after finishing warming milk/baby food. Be careful that hot water can cause serious bums.

• This reference sheet DO NOT provide accurate time due to different initial temp/bottle material/ ambient temp etc will affect final milk temp.
• Take out bottle in time to avoid overheating. If you find the milk is not warm enough, please place the bottle back into the appliance for a maximum of 0.5-1 minute of extra warming.

Reference Chart Only For Fast Warning Function

Tips: Please put lid on while fast warming.

24H – Constant Warming ****

1. Pour distilled water into the bottle warmer to the maximum scale line (The Max scale line is on the bottle warmer).

2. Place the bottle and liftout basket into the bottle wanner.

3. Press the power button, then choose “24H’ function button. The ·24H” icon will start flashing . Screen shows defauH temperature 37C/98.61 flashing and default heating time 24 hours steaely on. You can adjust temperature While irs flashing. If you want to adjust time, Press ’24H” again, timer indicator will start flashing and you can adjust as desired. The bottle warmer will start working after Iha temp/time indicator flashes twice. The “24H” indicator light keeps flashing and timer indicator is counting down while this function is working.
   Note:

   • The adjustable range of temperature is 35-60 t: (95-104 ‘l1 ).
   • The adjustable range of time is 2-59 minutes, 1-24 hours.

4. When the temperature reaches and stabilizes at 371:/98.61′ or other temp you set, the bottle wanner will beep 5 times to remind you to check whether your milk is ready.

5. The temperature indicator light arways shows the real time WATER temperature while the product is wor1<ing.

Caution: It is normal that temperature on screen will fluctuate before stabilize at target temperature, it may be higher than set temperature. Do worry this function will not overheat the milk. The device is built with smart sensor which will self-regulating and find a fastest heating mode to reach target temperature. The temperature will remain solid after half an hour and by that time your milk is ready. The time may be longer or shorter depends on the milk volumes and it’s initial temperature.

THAW – Defrosting

1. Pour distilled water into the bottle warmer to the maximum scale line (The Max scale line is on the bottle warmer).

2. Place the bottle and lift-out basket into the bottle warmer.

3. Press the power button, then choose “THAW” function button. The “THAW” icon will start flashing . Screen shows default temperature 37″C/98.6 l’ flashing and default heating time 24 hours steady on. You can adjust temperature while it’s flashing. If you want to adjust time, Press “THAW” again, timer indicator will start flashing and you can adjust as desired.
   The bottle warmer will start working after the temp/time indicator flashes twice. The “THAW’ indicator light keeps flashing and timer indicator is counting down while this function is working.
   Note:

   • The adjustable range of temperature is 90-108°F.
   • The adjustable range of time is 2-59 minutes, 1-24 hours.
   • How to adjust time: press “THAW’ again, the timer indicator will flash, adjust the time while it’s flashing. If you press “THAW’ third time, the temp indicator will flash, and you can adjust temp again. Press “THAW” button to switch between temp/time.

4. After the countdown is over, the bottle warmer will beep 5 times, device enters the standby mode.

5. The temperature indicator light always shows the real time WATER temperature while the product is working.

FOOD – Food Heating

1. Pour distilled water into the bottle warmer to the maximum scale line (The Max scale line is on the bottle warmer).

2. Place the baby food container and lift-out basket into the bottle warmer.

3. Press the power button, then choose “FOOD” function button. The “FOOD” icon will start flashing. Screen shows default temperature “70 C/158 F” flashing and default heating time 6 hours steady on. You can adjust temperature while it’s flashing. If you want to adjust time, Press “FOOD” again, timer indicator will start flashing and you can adjust as desired.
   The bottle warmer will start working after the temp/time indicator flashes twice. The “FOOD” indicator light keeps flashing and timer indicator is counting down while this function is working.
   Note:

   • The adjustable range of temperature is 50-80 C (122-176 P) .
   • The adjustable range of time is 2-59 minutes, 1-24 hours.
   • Press “FOOD” button again to switch between temp/time.
   • The temperature indicator light always shows the real time WATER temperature while the product is working.

4. After the countdown is over, the bottle warmer will beep 5 times, device enters the standby mode.

5. Make sure to stir the baby food during warming as it does not circulate automatically. Before feeding, please remember to stir the food well and make sure the food is heated evenly.

Sterilizing

1. Pour 100-150ml distilled water into the warmer (It is recommended to use distilled water to prevent scaling).

2. Place the lift-out basket into the bottle warmer first, then put the bottle and nipple upside down into the bottle warmer. Close the top lid.

3. Press the power button, then choose” ” function button. The ”  ” icon will start flashing . Screen shows default default temperature “100 C/212 ‘P” steady on and default sterilize time 10 minutes flashing. You can adjust time while timer is flashing as desired.
   The bottle warmer will start working after the time indicator flashes twice. The “ ” indicator light keeps flashing and timer indicator is counting down while this function is working.
   Notice:

   • The temperature of the “Sterilize” function is not adjustable, and the temperature indicator light always shows the actual WATER temperature while the product is working.
   • The adjustable range of time is 5-20 minutes.
   • The water volume cannot exceed the maximum scale line.

4. After the countdown is over, the bottle warmer will beep 5 times and enter the standby mode.

5. Be careful not to get burned when taking out the bottle after disinfection.

6. If water dry out, the product will shut down due to high temperature detected (you can not turn on the bottle warmer by press the power button at this time). Wait 10 minutes or add 6 OZ room temperature waterinto the chamber and wait for 3 minutes to cool down the milk warmer, then press the power button to restart.

Cleaning

• Unplug the bottle warmer and make sure it cooling down before cleaning.
• Do not immerse the working base for cleaning.
• It is recommended to use distilled water to prevent scale.
• Acetic acid or other descalers can help you clean the scale efficiently.

Descaling

It is recommended to descale the bottle warmer every four weeks to ensure it continues to work efficiently.

1. Mix 10g citric acid cleaner with 200ml/3.4oz of cold water to descale the bottle warmer. Turn on the bottle warmer, select the STERILIZING FUNCTION then wait for 2-3 minutes after boiling, the descaling is completed.
2. Mix 50ml/1.7oz of white vinegar with 100ml/3.4oz of cold water to descale the bottle warmer. Switch on the bottle warmer, select the MILK WARMING FUNCTION and wait for 10 minutes. Leave the solution in the bottle warmer until all scale has dissolved.

Note:

1. Never dry out
2. Do not use other tvoes of descalers

Warranty & Customer service

HEYVALUE strives for user friendly products for newborn and household items.We aim not only to create a product, but also an item that is filled with care love from us to our customers. If you have any issues at all, please contact us directly at (support@heyvaluestore.com) and we will help you out. Or SMS HEYVALUE to (833)524-0498

Registry Warranty

At HEYVALUE we only produce first class level products, but please registry your warranty just in case at: https://heyvaluestore.com/warranty

FREQUENTLY ASKED QUESTIONS

What are the dimensions of the HEYVALUE N2T Baby Bottle Warmer?

The dimensions of the HEYVALUE N2T Baby Bottle Warmer are 5.31 x 5.31 x 9.6 inches.

Does the HEYVALUE N2T Baby Bottle Warmer require batteries?

No, the HEYVALUE N2T Baby Bottle Warmer does not require batteries.

What is the item weight of the HEYVALUE N2T Baby Bottle Warmer?

The item weight of the HEYVALUE N2T Baby Bottle Warmer is 1.28 pounds.

What is the price of the HEYVALUE N2T Baby Bottle Warmer?

The price of the HEYVALUE N2T Baby Bottle Warmer is $39.99.

What is the warranty period for the HEYVALUE N2T Baby Bottle Warmer?

The warranty period for the HEYVALUE N2T Baby Bottle Warmer is 12 months.

What is the US version specification for the HEYVALUE N2T Baby Bottle Warmer?

The US version specification for the HEYVALUE N2T Baby Bottle Warmer is 120V- 60Hz.

What is the rate power of the HEYVALUE N2T Baby Bottle Warmer?

The rate power of the HEYVALUE N2T Baby Bottle Warmer is 400W.

What is the recommended temperature range for the HEYVALUE N2T Baby Bottle Warmer?

The recommended temperature range for the HEYVALUE N2T Baby Bottle Warmer is 15-30°C.

What is the recommended humidity level for the HEYVALUE N2T Baby Bottle Warmer?

The recommended humidity level for the HEYVALUE N2T Baby Bottle Warmer is 50~80%.

What is the product capacity of the HEYVALUE N2T Baby Bottle Warmer?

The product capacity of the HEYVALUE N2T Baby Bottle Warmer is 200ml.

Does the HEYVALUE N2T Baby Bottle Warmer have any special features?

The HEYVALUE N2T Baby Bottle Warmer doesn't mention any specific special features.

Why is my HEYVALUE N2T Baby Bottle Warmer not heating up the bottle?

Check if the unit is plugged in properly and the power switch is turned on. If the issue persists, ensure that the power outlet is functioning correctly.

What should I do if the HEYVALUE N2T Baby Bottle Warmer is overheating the bottle?

Make sure you're not exceeding the recommended temperature range for heating the bottle. If the problem persists, the unit may be malfunctioning, and it's best to discontinue use and contact HEYVALUE customer support.

How do I clean the heating element of my HEYVALUE N2T Baby Bottle Warmer?

To clean the heating element, unplug the unit and allow it to cool completely. Then, use a damp cloth to wipe the heating element gently. Do not submerge the unit in water or use abrasive cleaners.

My HEYVALUE N2T Baby Bottle Warmer is leaking water during use. What should I do?

Check the water reservoir for any cracks or damage. If there are no visible issues, ensure that the water reservoir is securely attached to the unit.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK:HEYVALUE N2T Baby Bottle Warmer User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>