Q-TRAN ANYBEND Q-CAP Flexible Fixtures Instructions
- June 9, 2024
- Q-TRAN
Table of Contents
Q-TRAN ANYBEND Q-CAP Flexible Fixtures Instructions
VHB MOUNTING
Remove the backing from the adhesive and apply firm pressure to the bonding surface.
Peel off secondary backing.
Adhere to mounting surface.
WHITE SNUG CLIP
Mount white snug clip with provided flat head screw.
Align fixture to white snug clips matching distances.
Press fixture into white snug clips.
PVC MOUNT CLIP : Connects two fixtures
Mounting Feed
Snap in 2″ channel
Press in fixtures
LOW PROFILE PVC MOUNT CLIP : Connects two fixtures
Mounting Feed
Snap in 2″ channel
Press in fixtures
PVC MOUNT CHANNEL : Support for the fixture
The PPS-BRACKET can be field cuttable and cut to whatever length your application requires. The PPS-BRACKET can be installed as a full length of 96″, multiple smaller pieces, or end to end.
Using pre-drilled pilot holes screw the #6 flat head screws to mount the PPS- BRACKET (1 screw every 16″).
NOTE : For drywall applications mount directly into a stud.
Using pre-
drilled pilot holes, use the #6 flat head screws to mount the PPS-BRACKET.
The PPS-96 or PPS-FT can be field cuttable and cut to whatever length your application requires. The PPS-96 or PPS-FT can be installed as a full length of 96″, multiple smaller pieces, or end to end.
To mount, pinch the upper half of the PPS-96 or PPS-FT while you pivot it around one side of the PPS-BRACKET and push-in until you hear it snap into place. The PPS-96 or PPS-FT flexes around the PPS-BRACKET to create a solid, and secure snap on connection.
LOW PROFILE PVC MOUNT CHANNEL : Support for the fixture
The PPS-LP-96 or PPS-LP-FT can be field cuttable and cut to whatever length your application requires. The PPS-96 or PPS-FT can be installed as a full length of 96″, multiple smaller pieces, or end to end for longer seamless runs.
Drill holes (1 hole/screw every 16″) into the PPS-LP.
Using pre-drilled holes, use the #6 flat head screws to mount the PPS-LP.
NOTE : For drywall applications mount directly into a stud.
Snap fixture into PPS-LP.
© 2021 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-08-10-21
References
- Your Name as Your Email | Hover Realnames
- LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>