GENESIS Seaborg 350 Steering Wheel and Pedals Installation Guide

GENESIS Seaborg 350 Steering Wheel and

Pedals

BUTTON MAP

INSTALLATION

FEATURES

• Gear stick
• Realistic foot pedals
• 8 action buttons
• Button programming

PACKAGE CONTENT

• 1x wheel
• 1x foot pedals
• 1x mounting clamp
• 1x manual

REQUIREMENTS

• Console or PC with a USB port
• Windows® XP/Vista/7/8/10
• Microsoft® Xbox® One, 360;
• Sony® PlayStation® 3, 4; Nintendo® Switch®

WARRANTY

• 2 years limited manufacturer warranty

SPECIFICATION

• Total buttons number
• Action buttons
• D-Pad
• Gear stick
• Shifting paddles
• Foot pedals
• Input interface
• Communication
• Vibration
• Connector
• Cable Length
• Wheel dimensions
• Pedal dimensions
• 15
• 8
• Yes, 8-direction
• Yes
• Yes
• Brake, throttle
• X-input, D-input
• Wired
• Yes
• USB
• 2m
• 31,5 x 27 x 28 cm
• 23,5 x 22 x 12 cm

PC

• (Optional) Install driver.
• Connect foot pedals connector (1) to socket in wheel (2).
• Connect USB cable from wheel (4) to free USB port in PC.
• Wheel is ready.

SWITCH

• PRO controller support must be activated in console settings for the wheel to be recognized.
• Plug wheel USB cable into Switch docking station free USB port (with console docked in). Alternatively, using the TYPE-C adapter (not included) connect the wheel and console directly.
• Power-on console.
• Wheel will start the automatic configuration of the connection. When it finishes, MODE LED will be solid lit.
• Wheel is ready.

PS3

• Plug wheel USB cable into free console USB port.
• Power-on console.
• Wheel will start the automatic configuration of the connection.
• When it finishes, MODE LED will be solid lit.
• Wheel is ready.

PS4

• Plug wheel USB cable into free console USB port.
• Power-on console.
• Connect wheel via USB cable* with PS4 controller.
• Controller must be shunt controller connection is mandatory for the wheel to work.
• After connection is established, LED indicator will lit.
• Wheel is ready.

XBOX1/360

• Plug wheel USB cable into free console USB port.
• Power-on console.
• Connect wheel via USB cable* with X1/X360 controller.
• The controller must be shunt controller connection is mandatory for wheel to work.
• After connection is estabilished, LED indicator will lit.
• Wheel is ready.

Cable is not included Original controller – although recommended – is not required. However, the producer does not guarantee that every 3rd party replacements will work and/or work correctly A wired controller is required for X360 control.

SWITCHING BETWEN X-INPUT AND D-INPUT MODES

• To switch between X-Input and D-Input modes while wheel is connected to PC,
• press and hold the HOME button for 3 seconds.
• Red LED will solid lit after the change is done.

BUTTON PROGRAMMING

• Buttons YAXB, LB, LT, RB and RT (BASE buttons) – can be assigned to L-paddle,
• R-paddle, throttle pedal, brake pedal, gear up, gear down (FUNCTION buttons).
• Press simultaneously and hold for 3 seconds SHARE and OPTION buttons.
• When the green LED is lit in center of the wheel, release the buttons.
• Press desired FUNCTION button, to which other BASE button functions will be assigned. The green LED will start blinking.
• Press desired BASE button. It’s default function will be now assigned to the previously pressed FUNCTION button. Green LED will shut.

CLEAR SINGLE BUTTON ASSIGNMENT

• Press simultaneously and hold for 3 seconds SHARE and OPTION buttons.
• When green LED is lit in center of wheel, release the buttons.
• Press programmed button once, after LED starts blinking press same button again.
• The default function is restored.

SAFETY INFORMATION

• Use as directed.
• Non-authorized repairs or taking the device to pieces make the warranty void and may cause the product damage.
• Avoid to hit or friction with a hard object, otherwise it will lead to grind surface or other hardware damage.
• Do not use the product in low and high temperatures, in strong magnetic selds and in the damp or dusty atmosphere.
• Do not drop, knock, or shake the device. Rough handling can break it.
• Slots and openings in the case are provided for ventilation and should not be obscured. Blocking the vents can cause overheating of the device.

WHEEL SENSITIVITY SETUP

• Press simultaneously and hold for 3 seconds SHARE and OPTION buttons.
• When green LED is lit in center of wheel, release buttons.
• Press SHARE again to show current sensitivity level. There are 3 levels: LED is slowly blinking: lowest sensitivity; LED is blinking faster: medium sensitivity; LED is blinking very fast: highest sensitivity.
• Press SHARE button again to toggle between sensitivity levels signaled with green LED as described above. When desired sensitivity is chosen, press D-PAD UP to confirm.

PROGRAMMING PEDALS AND PADDLES

AS THE Y AXIS

• Press simultaneously and hold for 3 seconds the SHARE and OPTIONS buttons.
• When the green LED is lit in the center of the wheel, release the buttons.
• Press LEFT on wheel D-PAD. After the green LED is pedals are programmed as Y-axis.
• Press RIGHT on wheel D-PAD. After the green LED is gear paddles are programmed as Y-axis.

CLEAR ALL BUTTONS ASSIGNMENT

• Press simultaneously and hold for 3 seconds SHARE and OPTION buttons.
• When green LED is lit in center of wheel, release buttons.
• Press and hold for 4 seconds OPTION button. When LED is o, default functions are restored.
• after device restart, all functions revert to default settings.

GENERAL

• The safe product, conforming to the EU requirements.
• The product is made in accordance with RoHS European standard.
• The WEEE symbol (the crossed-out wheeled bin) using indicates that this product in not home waste.
• Appropriate waste management aids in avoiding consequences which are harmful for people and the environment and result from dangerous materials used in the device, as well as improper storage and processing.
• Segregated household waste collection aids recycle materials and components of which the device was made.
• In order to get detailed information about recycling this product please contact your retailer or a local authority.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>