CEILINGSAM HEAVY DUTY Bin Slide Storage System Installation Guide
- June 1, 2024
- CEILINGSAM
Table of Contents
BIN SLIDE STORAGE SYSTEM
https://www.ceilingsam.com/installation
Please watch our Instructional Video online before beginning your installation
STORAGE AND MORE
INSTALLATION INSTRUCTIONS
https://CeilingSAM.com/installation
IMPORTANT: READ THROUGH ENTIRE INSTRUCTIONS
BEFORE BEGINNING ANY INSTALLATION
Bin Slide Storage System
MISSING A PART? There is no need to return this unit to the store.
Instead, EMAIL:
info@ceilingstorageandmore.com
We appreciate your purchase of the CeilingSAM ’Bin Slide’ Ceiling Storage
System.
CeilingSAM has made every effort to supply a quality product that insures a
lifetime of trouble-free service. In the event that you have any problems, and
BEFORE RETURNING THE UNIT TO THE SELLER, please email
info@ceilingstorageandmore.com
CeilingSAM ’Bin Slide’ Ceiling Storage Unit Lifetime Limited Warranty
CeilingSAM warrants this ceiling storage system against defects in the
material and workmanship for the life of the product.
CeilingSAM agrees to either repair the product or replace it at the sole
discretion of CeilingSAM . This warranty does not include the costs associated
with the physical installation, removal, or return of the CeilingSAM ‘Bin
Slide’ ceiling storage unit.
This warranty is valid and enforceable provided that the maximum weight
supported by the ‘Bin Slide’ does not exceed 35 lbs per bin, evenly
distributed. The customer, dealer, and/or installer releases CeilingSAM of all
claims, which includes the CeilingSAM tote ceiling storage unit, the actual
storage bin and the structure it is attached to. If the total loaded weight
exceeds 35 lbs per bin and/or the load weight isn’t evenly distributed or
properly supported on the channel rail, this warranty is void. This unit must
also be installed according to the manufacturer’s instructions (both written
and/or by video). At no time should you install more than 6 channels of the
“Bin Slide’ on any pair of ceiling rafters, truss, or ceiling studs. All
hardware and fasteners must be drilled properly into the stud/truss and for
safety purposes must be checked at least annually to maintain the safety,
e!cacy, and proper performance of the ‘Bin Slide’ ceiling storage system.
Only the original purchaser of this product is extended this warranty. No
warranty work will be provided under this warranty without purchaser’s
original receipt or other proof of the date of the original purchase
acceptable to CeilingSAM.
This CeilingSAM limited warranty covers product failure due to defects in
materials or workmanship ONLY! It does not cover corrosion, rust or
discoloration of it components, or product failure due to misuse, abuse,
faulty installation, alteration, lack of reasonable care, or any other failure
not related to the defects in materials or workmanship.
There are NO other warranties expressed or implied except those stated herein
as required by applicable law.
CEILING SAM SHALL NOT BE LIABLE FOR INCIDENTAL, SPECIAL, OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF
THIS WARRANTY.
ALL IMPLIED WARRANTIES, IF ANY, INCLUDING IMPLIED WARRANTIES OR
MERCHANTABILITITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE
DURATION OF THIS WARRANTY.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitation on how long an implied warranty lasts, so
the above exclusions or limitation may not apply to you. No other warranty,
written or verbal, will be honored for this product. This warranty give you
the specific legal right and you may also have other rights that vary from
state to state.
CeilingSAM is not responsible for damages of merchandise in transit. Repaired
or replaced products shall be subject to the terms of this warranty, to be
inspected by CeilingSAM prior to return shipment. Damages incurred during
transit should be reported at once to the carrier and a claim should be filed
with them. Thank you again for your purchase of the ‘Bin Slide’ ceiling
storage system.
STEP 1: UNBOX YOUR BIN SLIDE UNIT
Your box includes:
3 – Channel Rails
6 – Lag Screws with Washers
REQUIRED TOOLS:
MOUNT THE FIRST RAIL
STEP 2: FIND YOUR CEILING JOISTS
-
Mount your system perpendicular to the ceiling joists.
-
Use a Stud Finder to locate the Ceiling Joists.
STEP 2B: PRE-DRILL, AND MOUNT THE FIRST RAIL
-
Pre-drill into the center of the joist using a 3/16” Drill Bit.
-
Mount the first Channel Rail and fasten using 2 Lag Screws and Washers.
MOUNT THE SECOND RAIL
STEP 3: TAKE MEASUREMENTS FOR THE SECOND RAIL
-
Measure the lid of your bin.
-
From the inside edge of your mounted rail, measure the length of the bin´s lid and add 3/4”. Mark here with your pencil.
STEP 4: PRE-DRILL AND MOUNT THE SECOND RAIL
-
Pre-drill into the center of the joist using a 3/16” Drill Bit.
-
Mount your second Channel Rail and fasten using 2 Lag Screws and Washers.
EXTRA SPACE
STEP 5: EXTEND YOUR BIN SLIDE
-
If you purchased additional Channel Rails you can install them repeating steps 3 and 4.
-
For each additional Channel Rail, you will get an additional row of 2 bins.
Your Bin Slide Storage System is ready to load up. Enjoy being more organized!
YOUR INSTALLATION IS NOW COMPLETE!
Please visit our website for more information:
www.CeilingSAM.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>