CEILINGSAM HEAVY DUTY Bike Slide Pro Storage System Installation Guide

June 1, 2024
CEILINGSAM

CEILINGSAM HEAVY DUTY Bike Slide Pro Storage System

Product Information

Specifications:

  • Brand: CeilingSAM
  • Product Name: Bike Slide Pro Storage System
  • Maximum Weight Capacity: 300 lbs per row, 75 lbs per hook
  • Warranty: Lifetime Limited Warranty

Product Usage Instructions

Installation:

  1. Read through the entire installation instructions before beginning any installation.
  2. Ensure that the maximum weight supported by each Bike Slide Pro does not exceed the specified limits.
  3. Install the unit according to the manufacturer’s instructions, both written and/or by video.
  4. Do not install more than two Bike Slide Pro Storage Systems on any single ceiling rafter, truss, or stud.
  5. Check and tighten all hardware and fasteners at least annually.

Maintenance:
Regularly inspect the unit for any signs of wear or damage. Ensure that the weight limits are not exceeded. Clean the unit as needed using a mild detergent and water. Lubricate moving parts if necessary.

Usage:
Hang your bikes securely on the hooks provided by the Bike Slide Pro Storage System. Make sure each bike is properly supported and balanced. Avoid sudden movements or excessive force when placing or removing bikes from the system.

FAQ

  • Q: What should I do if I encounter any problems with the product?
    A: If you encounter any issues, please call our toll-free number at 833-255-1122 before returning the unit to the seller.

  • Q: How often should I check and tighten the hardware and fasteners?
    A: It is recommended to check and tighten all hardware and fasteners at least annually to ensure the stability and safety of the unit.

CeilingSAM.com/installation

IMPORTANT:
READ THROUGH ENTIRE INSTRUCTIONS BEFORE BEGINNING ANY INSTALLATION.

We appreciate your purchase of the CeilingSAM Bike Slide Pro. CeilingSAM has made every effort to supply a quality product that ensures a lifetime of trouble-free service. If you encounter any urgent problems, please call our toll-free number at 833-255-1122 BEFORE RETURNING THE UNIT TO THE SELLER.

Lifetime Limited Warranty

CeilingSAM Bike Slide Pro Lifetime Limited Warranty
CeilingSAM warrants this ceiling storage system against defects in the material and workmanship for the life of the product. CeilingSAM agrees to either repair the product or replace it at the sole discretion of CeilingSAM. This warranty does not include the costs associated with the physical installation, removal, or return of the CeilingSAM Bike Slide Pro. This warranty is valid and enforceable provided that the maximum weight supported by each Bike Slide Pro does not exceed 300 lbs per row, or 75 lbs per hook, evenly distributed. The customer, dealer, and/or installer releases CeilingSAM of all claims, which includes the CeilingSAM storage unit and the structure it is attached to.

This unit must also be installed according to the manufacturer’s instructions (both written and/or by video). At no time should you install more than two Bike Slide Pro Storage Systems on any single ceiling rafter, truss, or stud. All hardware and fasteners must be checked and tightened at least annually. Only the original purchaser of this product is extended this warranty. No warranty work will be provided under this warranty without the purchaser’s original receipt or other proof of the date of the original purchase acceptable to CeilingSAM. There are no other warranties expressed or implied except those stated herein as required by applicable law. This CeilingSAM limited warranty covers product failure due to defects in materials or workmanship ONLY! It does not cover corrosion, rust or discolouration of its components, or product failure due to misuse, abuse, faulty
installation, alteration, lack of reasonable care, or any other failure not related to the defects in materials or workmanship. There are no other warranties expressed or implied except those stated herein as required by applicable law.

CEILING SAM SHALL NOT BE LIABLE FOR INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL IMPLIED WARRANTIES, IF ANY, INCLUDING IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitation on how long an implied warranty lasts, so the above exclusions or limitation may not apply to you. No other warranty, written or verbal, will be honoured for this product. This warranty gives you the specific legal right and you may also have other rights that vary from state to state. CeilingSAM is not responsible for damages to merchandise in transit. Repaired or replaced products shall be subject to the terms of this warranty, and to be inspected by CeilingSAM before return shipment. Damages incurred during transit should be reported at once to the carrier and a claim should be filed with them.

CeilingSAM – www.CeilingSAM.com Phoenix, AZ 85281

REQUIRED TOOLS

CEILINGSAM-HEAVY-DUTY-Bike-Slide-Pro-Storage-System-Fig-
\(2\)

UNBOX

STEP 1: UNBOX YOUR BIKE SLIDE PRO STORAGE SYSTEM

  • Make sure all parts are included

Parts Included

Parts included: BIKE SLIDE PRO
PARTS INCLUDED IN YOUR BIKE SLIDE PRO STORAGE SYSTEM:CEILINGSAM-HEAVY-
DUTY-Bike-Slide-Pro-Storage-System-Fig- \(4\)

CONFIGURATION OPTIONS

The Bike Slide Pro can be mounted in two configurations:

bike slide pro

Parallel with the Ceiling joists

Perpendicular to the Ceiling joists

MOUNT YOUR SUPPORT RAIL

STEP 2: MOUNT YOUR SUPPORT RAILS

  • Use a Stud Finder to locate the Ceiling Joists.
  • Pre-drill at the very centre of the joists with a 3/16” Drill Bit before inserting the Lag Screws.
  • Mount the first Support Rail using 2 Lag Screws and Washers.
  • Mount the second Support Rail using 2 Lag Screws and Washers.

ASSEMBLE THE HOOKS

Each hook is assembled using a plastic washer, bearings, a carriage bolt and nut and a rubber strip

STEP 3: ASSEMBLE THE HOOKS

  • Insert the Plastic Washer between the Hook and the Bearings.
  • Fasten the Carriage Bolt and Nut with a 9/16” wrench. Do not over-tighten. You want the Hooks to spin freely.
  • Attach the Rubber Strip.
  • Slide your Hooks into the Support Rails and fasten the Long Bolts and Nuts using a 3/32” Allen key and an 11/32” wrench.

ENJOY BEING MORE ORGANIZED

  • Organize bikes, ladders, golf bags and more!
  • You can purchase more hooks from our website for additional storage.

YOUR INSTALLATION IS NOW COMPLETE!
Please visit our website for more information: www.CeilingSAM.com.

NEED MORE STORAGE

CEILINGSAM-HEAVY-DUTY-Bike-Slide-Pro-Storage-System-Fig-
\(17\) CEILINGSAM-HEAVY-DUTY-Bike-Slide-
Pro-Storage-System-Fig- \(18\)

CHECK OUT OUR OTHER PRODUCTS

CEILINGSAM-HEAVY-DUTY-Bike-Slide-Pro-Storage-System-Fig-
\(19\) CEILINGSAM-HEAVY-DUTY-Bike-Slide-
Pro-Storage-System-Fig- \(20\)

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals