iBoard IB-P058C 6 Inch Aluminum Running Boards Nerf Bars Side Steps Instruction Manual
- June 1, 2024
- iBoard
Table of Contents
iBoard IB-P058C 6 Inch Aluminum Running Boards Nerf Bars Side Steps
Product Information
Specifications:
- Part Number: IB-P058C&J
- Mounting Type: Rocker Panel Mount
- No drilling required
Product Usage Instructions
Part List:
- Driver Side Step Bar
- Passenger Side Step Bar
- Driver Front Mounting Bracket (DFM)
- Driver Center Mounting Bracket (DCM)
- Driver Rear Mounting Bracket (DRM)
- Passenger Front Mounting Bracket (PFM)
- Passenger Center Mounting Bracket (PCM)
- Passenger Rear Mounting Bracket (PRM)
Hardware Package A (For Bracket Installation):
| Item | QTY | Description |
|---|---|---|
| 1# | 12 | M8X1.25-25mm Hex Bolts |
| 2# | 12 | M8 Flat Washers |
| 3# | 12 | M8 Lock Washers |
Installation Steps:
Step 1:
Start installation from the driver side front of the vehicle, remove the
existing factory bolts or plastic plugs. This will be the mounting location
for the Driver Front Mounting Bracket.
Frequently Asked Questions (FAQ)
-
Do I need any special tools for installation?
No special tools are required for installation. All necessary hardware is included in the hardware packages provided. -
How often should I inspect the installation?
Periodic inspections are recommended to ensure all hardware is secure and tight. We recommend checking every few months or after off-road use.
PART LIST
| Fastener Size | Tightening Torque (ft-lbs) | Required |
|---|---|---|
| 6mm | 6-7 | X |
| 8mm | 16-18 | √ |
| 10mm | 31-32 | X |
| 12mm | 56-58 | X |
| 14mm | 92-94 | X |
Hardware Package
Hardware Package A (For Bracket Installation)
| Item | QTY | Description | Item | QTY | Description |
|---|---|---|---|---|---|
| 1# | 12 | M8X1.25-25mm Hex Bolts | 3# | 12 | M8 Lock Washers |
| 2# | 12 | M8 Flat Washers |
Hardware Package B (For Step Bar Installation)
| Item | QTY | Description | Item | QTY | Description |
|---|---|---|---|---|---|
| 1# | 12 | M8X1.25-35mm Carriage Bolts | 3# | 12 | M8 Nylon Lock Nuts |
| 2# | 12 | M8 Large Flat Washers | 4# | 6 | Sliders (Packed with Mounting Brackets) |
ASSEMBLY INSTRUCTION
-
STEP 1
Start installation from the driver side front of the vehicle, re-move the existing (2) factory bolts, (or plastic plugs) (Fig 1). This will be the mounting location for the Driver Front Mounting Bracket. -
STEP 2
Select the Driver Front Mounting Bracket, attach the Bracket to the vehicle using the included (2) M8x1.25-25mm Hex Bolts, (2) M8 Lock Washers and (2) M8 Flat Washers, (Fig 2). Do not fully tighten hardware at this time. -
STEP 3
Move along the side panel to the Driver Side Center Mounting Location, (Fig 3). Repeat Step 2 to install the Driver Center Mounting Brackets, (Fig 4).
-
STEP 4
Move along the side panel to the Driver Side Rear Mounting Location. Repeat Step 3 to install the Driver Rear Mounting Brackets. -
STEP 5
Once all (3) Driver side mounting brackets are installed, then proceed to the Step Bar installation. (Figs 5 & 6)
1. Select (1) Slider and (2) M8X1.25-35mm Carriage Bolts;
2. Install (2) M8X1.25-35mm Carriage Bolts in (1) Slider.
3. Slide the Slider (with carriage bolts) to the Step Bar.
4. Repeat to install the other (2) sliders to the step bar.
5. Attach the Step Bar (with the Sliders) onto the installed mounting brackets. Position the Sliders to the installed brack-ets. Secure the Step Bar to the installed Brackets by using (6) M8 Large Flat Washers and (6) M8 Nylon Lock Nuts and (3) Sliders, (Fig 6). Do not fully tighten hardware at this time. Note: The Sliders are packed with the Mounting Brackets.
Level and adjust the Step Bar and fully tighten all hardware. Repeat Steps 1-5
for the other side Step Bar installation. The installation is completed!!!
Attention
* Do periodic inspections to the installation to make sure that all hardware is secure and tight.
* In order to protect your bars/boards, please use mild soap/non-abrasive products for cleaning only.Customer Support: info@iboardauto.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>