TMG INDUSTRIAL TMG-MS1020A 10’ x 20’ Metal Garage Shed Owner’s Manual
- June 1, 2024
- TMG INDUSTRIAL
Table of Contents
TMG INDUSTRIAL TMG-MS1020A 10’ x 20’ Metal Garage Shed
Product Specifications:
- Model: TMG-MS1020A
- Product: 10’x 20′ Garage Metal Shed
- Dimensions: 2900mm x 5900mm
Product Usage Instructions
-
Before You Start:
Prior to installation, contact your local government authority for building approval. Study the owner’s manual for important information and tips. -
Assembly Instructions:
Review all instructions before starting assembly. Follow the step sequence carefully. Two people are recommended for assembly, and it may take a full day to complete. -
Parts:
Check all parts against the list provided. Familiarize yourself with the hardware and fasteners included in the packaging. -
Tools Required:
Use heavy-duty gloves when handling steel sheets and flashing. -
Plan Ahead:
- Choose a dry and calm day for installation.
- Avoid assembling in windy weather to prevent damage or injury.
- Ensure the ground is not wet or muddy.
-
Teamwork:
Work with at least two people for easier assembly. One person positions parts while the other handles fasteners and tools.
Site Selection:
- Avoid overhanging trees to minimize cleaning and hazards.
- Consider small trees, bushes, or fences as windbreaks.
Site Preparation:
- Ensure the shed base is level and use treated timber or concrete to prevent moisture. Do not build directly on lawn. Allow concrete/cement to dry before building on top.
- Bases can also be constructed from bricks, blocks, or mounted on a concrete pad. Cement bricks or blocks onto firm, level concrete footings and secure the shed frame to the base.
FAQ:
-
Q: Can I build the shed alone?
A: It is recommended to assemble the shed with at least two people for safety and efficiency. -
Q: What should I do if I encounter missing parts during assembly?
A: If you have missing parts or questions during assembly, contact customer service at 1-877-761-2819 or email cs@tmgindustrial.com .
TMG-MS1020A
PRODUCT MANUAL
10′ x 20′ GARAGE METAL SHED
- This structure is intended for temporary outdoor storage use only. It is not designed to withstand heavy snow and wind loads and does not come with engineering drawings. To ensure suitable for your specific weather needs, it is your responsibility to verify their appropriateness for your intended use and local weather conditions, especially in areas prone to severe weather.
- Please read and understand the product manual completely before assembly
- Check against the parts list to make sure all parts are received
- Wear proper safety goggles or other protective gears while in assembly
- Do not return the product to dealer. They are not equipped to handle your requests.
- Missing parts or have questions on assembly?
Please call: 1-877-761-2819 or email: cs@tmgindustrial.com
BEFORE YOU START
-
Owner’s Manual
- Prior to installation, it is important that you contact your local government authority to determine if building approval is required. Study and understand this owner’s manual.
- Important information and helpful tips will make your construction easier and more enjoyable.
-
Assembly instructions
Instructions are supplied in this manual and contain all appropriate information for your building model. Review all instructions before you begin. During assembly, follow the step sequence carefully for correct results .Please be aware: this unit takes two people about one full day to complete. -
Parts
- Check to be sure that you have all the necessary parts for the building.
- Separate contents of the carton by the part number while reviewing parts list.
- Familiarize yourself with the hardware and fasteners for easier use during construction. These are packaged within the carton. Note that extra fasteners have been supplied for your convenience.
TOOLS MAY REQUIRED
Use heavy duty gloves when
handling steel sheets and flashing
PLAN AHEAD
- Watch the weather:
- Please be sure the day you select for installation is dry and calm.
- DO NOT attempt to assemble your shed in windy weather because of risk of damage to panels, or personal injury. Be careful of wet or muddy ground.
- Teamwork:
Whenever possible, two or more people should work together to assemble the building. One person can position parts or panels It requires two people a full while the other is able to handle the fasteners and the tools. day to complete installation
Site Selection
- Avoid overhanging trees as much as possible as leaves will make regular cleaning necessary and broken branches are a potential hazard.
- Small trees, bushes or fences nearby can be helpful, acting as a wind break.
Site Preparation
- The site must be prepared so that the base of the shed is level all round and checking with a spirit level is required.
- The base can be constructed by treated timber or concrete, in order to stop the moisture getting into the shed. The shed is not designed to be built onto lawn directly. Also the ground will get muddy during rainy days.
- If a concrete pad is made, it is important that this slopes towards the edges to prevent water ingress.
- Time must be allowed for any concrete or cement to dry before building the shed on top.
- Bases can also be constructed from bricks, blocks, or mounted on a concrete pad.
- The bricks or blocks should be cemented onto firm and level concrete footings and the greenhouse frame drilled and screwed to the base.
IMPORTANT NOTES:
- Find someone to help you: it is much easier with someone to hold parts, pass tools act. Also some steps require two people to lift structures together. This is not very heavy work so would suit most able-bodied people.
- Allow plenty of time: rushing often causes errors and the re-doing of incorrect assemblies. If you have never built a shed before, it can take most of a day to carefully complete the construction.
- Have the right tools to hand.
- Safety clothing as recommended in the ‘Tools’ section.
- Ideally lit out the parts and check that all are present before commencing construction. Lay on cloths or plastic sheets if there is any risk of scratching the parts.
- Tighten all nuts carefully, being sure not to miss any. Check the frame is square and using a spirit level to check that it is upright.
Parts And Tools
‘
Assembly
WARRANTY INFORMATION
- Please refer to our website for detailed warranty conditions and coverage.
- For the most up-to-date and comprehensive warranty information, visit www.tmgindustrial.com
www.tmgindustrial.com
Toll Free :1 -877-761-2819
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>