TMG INDUSTRIAL TMG-MS2525 25’ x 41’ Double Garage Metal Instruction Manual

TMG INDUSTRIAL TMG-MS2525 25’ x 41’ Double Garage Metal

Product Specifications

• Intended Use : Temporary outdoor storage
• Not suitable for : Heavy snow and wind loads
• Engineering Drawings: Not included

Product Usage Instructions

Verify Suitability for Weather Conditions:
Before using the structure, ensure it is suitable for your specific weather needs. Check local weather conditions, especially in areas prone to severe weather.

Assembly:
If you have missing parts or questions on assembly, please contact us at 1-877-761-2819 or email cs@tmgindustrial.com for assistance.

Warranty Information:
For detailed warranty conditions and coverage, refer to our website at www.tmgindustrial.com for the most up-to-date information.

FAQ

• Can this structure withstand heavy snow and wind loads?
  No, this structure is not designed for heavy snow and wind loads. It is intended for temporary outdoor storage only.

• Are engineering drawings included?
  No, engineering drawings are not included with this product.

• Where can I find detailed warranty information?
  For the most up-to-date and comprehensive warranty information, visit our website at www.tmgindustrial.com.

BEFORE YOU START

Items Required:

• • Clear a working area to allow access on 4 sides. A raised work surface will make assembly easier.
  • Please choose a dry and calm day to start assembly. Do not attempt installation in rainy or windy day.
  • Keep roof clear of leaves and snow with long handled, soft-bristled broom. Heavy amounts to
  snow on roof can damage building, making it unsafe to enter.
  • All parts are identified so when working through the instructions page by page the diagrams show
  where each part is positioned.
  Before starting, to avoid any accidental injury, we recommend the use of gloves to protect your hands,
  safety glasses to protect your eyes and shoes or boots to protect your feet.
  • Please keep children away from your construction site.
  • Most assembly can be completed by one person, assistance may be needed when you reach the
  erection stage.
  Cleaning should be performed as often as is required to remove any dirt, salt, and pollutants.
  • Please note: Some local government authorities have rules & regulations on shed installation and you may need approval to erect this shed.

STEPS:

1. When completed place shed in position and anchor securely to the ground.
2. Clean up all metal pieces, rivets and screws.

THE LAYOUT OF FOUNDATION(ONE)

PART LIST

INSTALLATION FRAMEWORK

INSTALLATION WALL TILE

DOOR ASSEMBLY

ASSEMBLY OF ROLLER DOOR (OPTIONAL)

ASSEMBLY OF THE DOOR MAY REQUIRE THE FOLLOWING PARTS

ASSEMBLY OF ROLLER DOOR

1. ADJUST THE LOWER LIMIT
   Assume that C is the direction in which the roller door goes down. Press the downward button on the remote control, the roller door goes down. If the electrical machine stops rotating when it reaches the position in picture D, adjust A to rotate in the direction of “+” until the roller door is parallel to the ground. If the electrical machine is still rotating downward when the roller door touches the ground, press the stop button, adjust A to rotate in the direction of

2. ADJUST THE UPPER LIMIT
   Press the upward button on the remote control, The roller door goes up. If the electrical machine stops rotating when it reaches the position in picture E, adjust B to rotate in the direction of “+”, and pay attention not to slipping off the guide rail until it gets an appropriate position. If the roller door is still operating upward when it gets the appropriate position, press the stop button, adjust A to rotate in the direction of “-“.

3. ADJUST THE UPPER AND LOWER LIMIT REPEATEDLY UNTIL IT OPERATES SMOOTHLY.

4. ROTATE THE ROLLER DOOR WITH THE ROCKER (IN PICTURE J) WHEN POWER CUT.

INSTALLATION FRAMEWORK

INSTALL TRANSPARENT PANEL

Correct Demonstration
The blank space is where the transparent panels are installed. Please install them according to the correct position. The two transparent panels are stacked together. Incorrect installation will cause water leakage. Please pay special attention.

Error Demonstration
Tip: After this step, please go back to page 37 to continue the installation.

WARRANTY INFORMATION:

• Please refer to our website for detailed warranty conditions and coverage.
• For the most up-to-date and comprehensive warranty information, visit www.tmgindustrial.com

References

• TMG Industrial — TMG Industrial USA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>