iBoard WB-CN197MD 6 Inch Tubular Drop Down Style Nerf Bars Running Boards Installation Guide

iBoard WB-CN197MD 6 Inch Tubular Drop Down Style Nerf Bars Running Boards

Product Information

Specifications:

• Model: NB1 Running Board
• Compatibility: 2015-2024 Chevy Colorado/GMC Canyon Crew Cab
• Part Numbers: WB-CN197MD / WB-CN197BD / HW-WB-CN197
• Parts Included:
  • 1 Driver/Left Running Board
  • 1 Passenger/Right Running Board
  • 3 Driver/Left Side Mounting Brackets
  • 3 Passenger/Right Side Mounting Brackets
  • 12 10-1.5mm x 35mm Hex Bolts
  • 24 10mm x 27mm x 3mm Flat Washers
  • 12 10-1.5mm Nylon Lock Nuts
  • 12 8-1.25mm Clip-on Nuts
  • 12 8-1.25mm x 30mm Hex Bolts
  • 12 8mm x 24mm x 2mm Flat Washers
  • 12 8mm Lock Washers

Product Usage Instructions

Installation Steps:

1. 1. Start the installation under the passenger side of the vehicle.

2. Locate front mounting location along the bottom and inner side of the body panel.

Maintenance:

To protect your investment, wax this product after installing. Regular waxing is recommended to add a protective layer over the finish. Do not use any type of polish or wax that may contain  abrasives that could damage the finish. Mild soap may be used to clean the Running Board.

FAQ

Q: Can I install the running boards alone?

A: While installation assistance is recommended, it is possible to install the running boards alone with proper care and attention to detail.

NB1 RUNNING BOARD
2015-2024 CHEVY COLORADO/GMC CANYON CREW CAB
PART# WB-CN197MD /WB-CN197BD/HW-WB-CN197

PARTS LIST

INSTALLATION INSTRUCTIONS

PROCEDURE

REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. ASSISTANCE IS RECOMMENDED.

1. Start the installation under the passenger side of the vehicle. Locate the front mounting location along the bottom and inner side of the body panel, (Figures 1 & 2). NOTE: It may help to hold a Bracket up in place to help determine the mounting holes to use along the bottom and inner side of the body.

2. Remove rubber plugs from the front location, (Figure 2). Select (2) 8mm Clip Nuts. Slide each Clip Nut into the large hole and over the smaller hole next to it. Line up threaded nut on the Clip Nut with smaller hole in body panel, (Figure 3).

3. Select (1) passenger side Mounting Bracket, (Figure 4). Attach the Bracket to the (2) Clip Nuts with (2) 8mm Hex Bolts, (2) 8mm Lock Washers and (2) 8mm Flat Washers, (Figures 4 & 5). Snug but do not fully tighten the hardware.

4. Move to the next mounting location along the body, (Figures 1 & 6). Repeat Steps 1—3 to install (1)  passenger side Mounting Bracket in the center location, (Figure 7).

5. Next, locate the rear mounting location toward the back of the cab, (Figures 1 & 8). Repeat Steps 1—3 to install (1) passenger side Mounting Bracket in the rear location, (Figure 9).

6. Once all (3) Brackets have been fully installed, select (1) Running Board. NOTE: Use the illustration above to help identify the passenger side Running Board.

7. With assistance, place the Running Board on the front facing side of the Mounting Brackets. Attach the Running Board to the Brackets with (6) 10mm Hex Bolts, (12) 10mm Flat Washers and (6) 10mm Nylon
   Lock Nuts, (Figure 10).

8. Slide the Running Board in or out as desired. IMPORTANT: Do not allow the front of the Running Board to come in contact with front splash guards if equipped. Level and adjust the Running Board as necessary and fully tighten all hardware.

9. Repeat Steps 1—8 for driver side Running Board installation.

10. Do periodic inspections to the installation to make sure that all hardware is secure and tight.

To protect your investment, wax this product after installing. Regular waxing is recommended to add a protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could damage the finish. Mild soap may be used to clean the Running Board.

Passenger/right Side Installation Pictured

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>