nVent IDS9TWB CADDY Independent Support Clip User Guide
- June 1, 2024
- nVent
Table of Contents
nVent IDS9TWB CADDY Independent Support Clip
Specifications
- Catalog Number: IDS9TWB
- Material: Spring Steel
- Finish: nVent CADDY Armour
- T-Grid Size: 14 mm
- Flange Thickness: 1.6 mm
- Screw Length: 14.3 mm
- Static Load: 290 N
- Included Components: Brass Barrel Nut
Product Features
The Independent Support Clip provides a means of independent support for
fixtures without the need for tools during installation. It includes all
necessary mounting hardware for easy setup.
Product Usage Instructions
Installation Steps:
- Identify the location where you want to install the fixture.
- Place the Independent Support Clip on the T-Grid at the desired position.
- Secure the clip using the provided 0.563 screw and Brass Barrel Nut.
Warnings:
It is crucial to follow nVent’s product instruction sheets and training
materials for correct installation. Failure to do so may result in product
malfunction, property damage, serious bodily injury, or voiding of warranty.
FAQ
-
Q: Is this product suitable for heavy fixtures?
A: The Independent Support Clip has a static load capacity of 290 N, making it suitable for a variety of fixtures. However, always ensure that the fixture weight does not exceed the specified limit. -
Q: Can I reuse the clip after uninstallation?
A: While the clip is designed for easy installation, it is recommended to use a new clip if reinstalling the fixture to ensure optimal performance and safety.
INDEPENDENT SUPPORT CLIP, 9/16″ T-GRID, 0.563″ SCREW, BRASS BARREL NUT
CATALOG NUMBER
IDS9TWB
FEATURES
- Provides a means of independent support of fixtures
- No tools required for installation
- Includes mounting hardware
PRODUCT ATTRIBUTES
- Material: Spring Steel
- Finish: nVent CADDY Armour
- T-Grid Size: 14 mm
- Flange Thickness: 1.6 mm
- Screw Length: 14.3 mm
- Static Load: 290 N
- Included Components: Brass Barrel Nut
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
-
North America
+1.800.753.9221
Option 1 – Customer Care Option 2 – Technical Support -
Europe Netherlands:
+31 800-0200135 France:
+33 800 901 793 -
Europe Germany:
800 1890272 Other Countries: +31 13 5835404 -
APAC
Shanghai:
+ 86 21 2412 1618/19 Sydney:
+61 2 9751 8500
Our powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>