nVent TSMI0062 CADDY Swift Clip Strut Clamp for Insulated Tube Pipe User Guide
- June 1, 2024
- nVent
Table of Contents
nVent TSMI0062 CADDY Swift Clip Strut Clamp for Insulated Tube Pipe User
Guide
FEATURES
Secures pipe and insulation without a break, providing an uninterrupted vapor barrier seal which eliminates sweating on metal fittings Snap-in and twist installation requires no tools Fits directly into vertical and horizontal strut channels For support and positioning of refrigeration, A/C tubing, PEX piping, conduit and cabling Compliant with UL® 2043 and suitable for use in air handling (plenum) spaces
PRODUCT ATTRIBUTES
- Material: Polyamide
- Working Temperature: −40 to 284 °F
- Outer Diameter: 1 5/8″
- Copper Tube Size: 1 1/2″
- Width: 1 5/8″
ADDITIONAL PRODUCT DETAILS
Can also be used with PEX piping. For PEX pipe sizes, refer to the Copper Tube Size column. Clip must be installed with temperature at or above 14 °F (-10 °C).
Part Number| Copper Tube with 3/8″ Insulation| Copper Tube with
1/2″ Insulation
---|---|---
TSMI0062| –| –
TSMI0075| –| –
TSMI0087| –| –
TSMI0100| 1/4″| –
TSMI0112| 3/8″| –
TSMI0125| 1/2″| 1/4″
TSMI0137| 5/8″| 3/8″
TSMI0150| 7/8″| 5/8″
TSMI0162| 1 1/8″| 3/4″
TSMI0200| –| 7/8″
TSMI0212| 1 3/8″| 1 1/8″
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
Netherlands:
+31 800-0200135
France:
+33 800 901 793
Europe
Germany:
800 1890272
Other Countries:
+31 13 5835404
APAC
Shanghai:
+ 86 21 2412 1618/19
Sydney:
+61 2 9751 8500
2024 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>