Kybele Decor KBEL1086 16 Inch Wall Mounted Nightstand Instruction Manual
- June 1, 2024
- Kybele Decor
Table of Contents
Kybele Decor KBEL1086 16 Inch Wall Mounted Nightstand
ASSEMBLY MANUEL
-
General view for option one with legs nightstand
-
General view for option two Floating nightstand
Please Read Our Introduction
Valued
Customer,
We design and carefully manufacture our products for our customers, We wish
that our customers to have fun while they are doing their new furniture The
product you just purchased was subjected to all sorts of tests and controls
before sending out to you.
Hope you enjoy your new furniture!!
Although all products are carefully manufactured and packed, sometimes we
experience damage during transportation.
Insuch cases, please check the damaged part, note the part number written on
the part and do not hesitate to contact us
Mail : [email protected]
Furniture parts are going to several manufacturing procedures. During this process, parts can have little dust or marks. Please clean the parts with dump cloth before assembly to get the best result. Usual cleaning would be suffice.
Before starting, please check all components and accessories according to the
provided list.
If you purchased more than one product, to prevent confusion, be sure that you
completed t he first product, the start the next one.
Please make sure that you select correct numbered part and use specific
connector to assemble.
We do not recommend any modification or rotation in assembly.
Please follow the manual carefully.
Do not use your furniture for out of purposes.
If you would like to use it out of purpose or would like to do some
modification or rotation, please contact us for more details.
Please do not expose your furniture with excessive heat, cold and humidity
because product can be affected negatively.
How to install Components
-
MINIFIX HEAD
-
MINIFIX SCREW
-
DOWEL
If the dowel is not required during the installation phase, it is not included in the package.
*Please notice that there is an small arrow on A03 (minifix head).This arrow should show the direction of upper hole.
*After attaching two pieces please turn the A03 (minifix head) clockwise direction with the help of a screwdriver.
*Please do not over screw the minifix head since it may be broken if too much power is imposed. Just make sure that it is screwed to the direction “+” do not go any further.
ACCESSORY LIST
GENERAL VIEW
Assembly Instruction
WITH LEGS NIGHTSTAND
FLOATING NIGHTSTAND
This modern nightstand is offered for sale with two different options. If you bought the product with feet, it comes in the second box and you should assemble the legs as follows.
- If you want to use the product as a floating side table or nightstand by mounting it on the wall, please follow the assembly instructions below.
- Please use stand finder to anchor brackets into the studs for safe installaton
Please contact us about any product related issue. We are honored to support you.