Kybele Decor A02 KidSpace 2-Tier Horizontal Storage Shelf Instruction Manual

Kybele Decor A02 KidSpace 2-Tier Horizontal Storage Shelf

Please Read Our Introduction

• Valued Customer, We design and carefully manufacture our products for our customers, We wish our customers to have fun while they are making their new furniture The product you just purchased was subjected to all sorts of tests and controls before sending out to you. Hope you enjoy your new furniture!!!

• Furniture parts are going through several manufacturing procedures. During this process, parts can have little dust or marks. Please clean the parts with a dump cloth before assembly to get the best result. Usual cleaning would be sufficient.

• Do not use your furniture for out purposes. If you would like to use it out of purpose or would like to do some modification or rotation, please contact us for more details. Please do not expose your furniture to excessive heat, cold and humidity because the product can be affected negatively.

• Although all products are carefully manufactured and packed, sometimes we experience damage during transportation. In such cases, please check the damaged part, note the part number written on the part and do not hesitate to contact us
  Mail: info@kybeledecor.com

• Before starting, please check all components and accessories according to the provided list. If you purchased more than one product, to prevent confusion, be sure that you completed the first product,the started the next one. Please make sure that you select the correct numbered part and use the specific connector to assemble it. We do not recommend any modification or rotation in assembly. Please follow the manual carefully.

WARNING

How to instal Components

• If the dowel is not required during the installation phase, it is not included in the package.

• Please notice that there is a small arrow on A03 (minifix head}. This arrow should show the direction of the upper hole.

• After attaching two pieces please turn the A03 (minifix head) in clockwise direction with the help of a screwdriver.

• Please do not over-screw the minifix head since it may be broken if too much power is imposed. Just make sure that it is screwed to the direction”+” do not go any further.

ACCESSORY LIST

GENERAL VIEW

INSTALLATION INSTRUCTION

Please contact us about any product-related issues. We are honoured to support you.

• info@kybeledecor.com

Specifications

• Model: ADEL
• Available Models : A01, A02, A03, A04
• Magnification : 30x, 20x, 10x
• Button : E01 effaf Altlik Butonu

Product Usage Instructions

Turning On/Off
To turn on the device, press and hold the power button for a few seconds. To turn it off, repeat the same process.

Adjusting Magnification
Rotate the magnification dial to switch between 30x, 20x, and 10x magnification levels based on your requirements.

Using the E01 Button
The E01 button is used for specific functions. Refer to the user manual for detailed instructions on its usage.

Frequently Asked Questions (FAQ)

Q: How do I change the magnification level?
A: Rotate the magnification dial to switch between 30x, 20x, and 10x magnification levels.

Q: What is the purpose of the E01 button?
A: The E01 button serves specific functions; please refer to the user manual for detailed information on its usage.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>