HOME ACCENTS Hoilday 23SV23785 6 ft. Animated LED Jack Frost Instruction Manual
- June 1, 2024
- HOME ACCENTS Hoilday
Table of Contents
HOME ACCENTSHolidayy 23SV23785 6 ft. Animated LED Jack Frost
Product Information
Specifications:
- Input: 100-240V 50/60Hz
- Output: 5.9V 2A
Product Usage Instructions
Assembly Instructions:
- Slide the Foam Tubes (E) down to the Boots (C).
- Slide the Pants (F) onto the assembly with the tag at the back of the Pants facing towards the back.
- Pull the Pants up over the hip hoop available on the Body Frame (G).
Operation Instructions:
- Plug the power adapter into a standard power outlet.
- Adjust settings on the Function Control Box located on the Body Frame as desired.
Settings:
- This mode activates lights, sound, and animation when the infrared (IR) sensor is activated.
- Try Me Activation Pad mode activates the item only when triggered by the pad.
- Continuous operation mode for lights, sound, and animation.
Volume can be adjusted using the volume control turn dial.
Safety Warning:
This item is not a toy and should be used for decoration only. Contains small
parts that can be a choking hazard. Keep away from children. Follow assembly
instructions carefully. Children should be supervised by adults while using
the product.
FAQ
-
Q: What should I do if a part is missing or broken?
A: Do not attempt to assemble the product. Contact SVI Customer Service or Home Accents Holiday Customer Service for assistance. -
Q: What should I do if the IR sensor is not working?
A: Ensure that nothing is blocking the sensor and check for any obstructions.
EASY ASSEMBLY AND OPERATION INSTRUCTIONS
23SV23785 Jack Frost
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
IF ANY PART IS MISSING OR BROKEN, DO NOT ATTEMPT TO ASSEMBLE THE PRODUCT AND
CONTACT SVI CUSTOMER SERVICE FROM 8:30 AM TO 5:30 PM PST AT
1-855-428-3921, EMAIL
CUSTOMERSERVICE@SVIUS.COM, OR CALL HOME
ACCENTS HOLIDAY CUSTOMER SERVICE FROM MON-FRI 8:00 AM TO 7:00 PM AND SAT 9:00
AM TO 6:00 PM EST AT 1-855-HDHOLIDAY
(1-855-434-6543).
IMPORTANT TIPS
- Ensure that the item’s adapter is plugged in at the function control box and in the wall.
- Ensure that the switch on the function control box is in the desired setting.
- If not functioning properly (Eyes don’t light up, body and head don’t turn, mouth doesn’t move), ensure that cables are connected correctly, according to the instruction sheet.
- Be sure nothing is blocking movement or caught in moving parts.
- Ensure that the floor or surface that the item sits on is flat and level.
- Ensure that the volume is not down.
- If the item still does not work, contact SVI Customer Service from 8:30 am to 5:30 pm PST at 1-855-428-3921, email customerservice@svius.com, or call Home Accents Holiday Customer Service from Mon-Fri 8:00 am to 7:00 pm and Sat 9:00 am To 6:00 pm EST at 1-855-HDHOLIDAY (1-855-434-6543).
PARTS LIST
- A. Base x 1
- B. Lower Poles x 2
- C. Boots x 2
- D. Knee Poles x 2
- E. Foam Tubes x 2
- F. Pants x 1
- G. Body Frame x 1
- H. Shirt x 1
- I. Left Arm x 1
- J. Left Hand x 1
- K. Right Arm x 1
- L. Right Hand x 1
- M. Head x 1
- N. Scarf x 1
- O. Adapter x 1
- Input: 100-240V 50/60Hz
- Output: 5.9V 2A
Assembling Instruction
YOUR JACK FROST IS NOW FULLY ASSEMBLED. PLUG IN AND TURN ON TO LET THE FUN BEGIN!
OPERATION INSTRUCTIONS
-
Plug the power adapter into a standard power outlet and adjust the settings on the Function Control Box, located on the Body Frame, as desired.
-
Settings:
-
Sensor
This switch mode will activate lights, sound, and animation when the infrared (IR) sensor is activated and will operate for 1 audio cycle with each activation. The Infra-red (IR) sensor has a range of up to 2 m/6.5 ft. and will activate when someone comes within an 80-degree angle from left-to-right, as well as from above and below. -
This switch mode allows the item to be activated only if triggered by using a Step Here Try Me Activation Pad (Not Included). The item will operate for one audio cycle with each Try Me activation. Otherwise, the item will stay off.
-
I. This switch mode will continuously operate the lights, sound, and animation of the item.
-
Raise or lower the volume using the volume control turn dial, and turn down to turn the volume off.
-
WARNING
This item is not a toy and should be used for decoration only. This item
contains small parts that can be a choking hazard. Keep all plastic and wire
parts away from children.
- Please use the adapter supplied by the manufacturer.
- Please assemble the item according to instructions. Connect all wires according to matching colour.
- Children should be supervised by adults. IteThe itemould not be grabbed, as it becomes a tipping hazard. Keep flammables away from the adapter, as it heats up during operation.
Please view all instructions carefully before assembling. Save this instruction sheet for future reference.
CARE AND STORAGE INSTRUCTIONS
For best performance operate your item indoors. When not in use, store this product in its original packing. Keep away from heat and moisture.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: Reorient
or relocate the receiving antenna, Increase the separation between the
equipment and receiver. Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected. Consult the dealer or
experienced radio/TV technician for help.
CAN ICES-003(B)/NMB-003(B)
© Seasonal Visions International Berkeley, CA 94710
Tel: 1-855-428-3921
All Rights Reserved
MADE IN CHINA.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>