TFCFL LZQ-1 Polisher Polishing Machine Dental Laboratory Lathe Buffing Grinder User Manual
- June 1, 2024
- TFCFL
Table of Contents
TFCFL LZQ-1 Polisher Polishing Machine Dental Laboratory Lathe Buffing
Grinder
Specifications
- Power supply voltage : 220V
- Power : 550W
- Rotational speed: 3000rpm
- Dimensions : 50x20x25cm
Product Information
The LZQ-1 Polishing Lathe is a versatile tool designed for polishing various metal materials such as Ni-Cr Alloy, Cr-Co Alloy, and stainless steel. It is also suitable for polishing plastic dentures, dental braces, and porcelain teeth. The housing of the lathe is constructed from durable and extra-hard materials to ensure longevity and performance. This polishing lathe is an essential piece of equipment for dentists to achieve high-quality finishes on dental prosthetics.
Product Usage Instructions
Motor
Ensure the motor is securely connected to the power supply and that it is
functioning properly before operation.
Protective Case
Always use the lathe with the protective case in place to prevent any
accidents or injuries during operation.
Wheel
Check the condition of the grinding wheel before use. It should be smooth
and free from any defects. If there are any issues with the wheel, resolve
them before operating the lathe.
Power
Make sure the power supply voltage matches the specified requirement (220V)
to avoid any electrical issues during operation.
Notice
Thank you for your attention. For optimal performance and safety, please
follow the provided instructions carefully when using the LZQ-1 Polishing
Lathe.
FAQ
Can this polishing lathe be used for materials other than those mentioned
in the description?
It is recommended to use the LZQ-1 Polishing Lathe only for the specified
materials (Ni-Cr Alloy, Cr-Co Alloy, stainless steel, plastic dentures, dental
braces, and porcelain teeth) to ensure best results and longevity of the
equipment.
Description
The LZQ-1 Polishing Lathe is used to polish various kinds of metal (Ni-CrAlloy ,Cr-Co Alloy, and stainless steel) ,plastic dentures, dental bracesand porcelain teeth. The housing is made of extra-hard materials. It is a necessary equipment for all dentists
Specifications
| Power supply voltage | AC220v/50hz±10% |
|---|---|
| Power | 550W |
| Rotational speed | 3000rpm |
| Dimensions | 50x20x25cm |
Instructions
- The machine should be used under 1,000 Maltitude,between the temperature of 15°c and 40°c, and under the humidity of 95%.
- Before using the machine, please check if the accessories are damaged during transportation.
- Before using the machine,please use your hands to ture the axis of the grinding wheel, and it should be smooth, if not, the problem should besolved before operating
Notice:
- Please use this machine under the right voltage and frequency.
- The housing of the lathe should have a good grounding
- Please do not use this machine in the room filled with the gas which might cause fire or explosion.
- Do not take off the safety case.
- Please do not use this machine outdoors.
- Please do not spill water onto the machine while it is working.
- The direction of which this machine rotates should be the same asthe direction written on the instruction sheet.
- User should wear goggles while operating
- To avoid being hurt by the pieces coming off the workpiece, please do not push the workpiece violently onto the grinding wheel.
- To avoid hurting other people by turning on the machine accidentally,pleaseturn off the machine and cut the power after using.
Thank you for your attention
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>